Simplicity Snow Blower Install and Test In Foot+ Of Snow
Вставка
- Опубліковано 15 вер 2024
- Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com...
We Install this Simplicity 1691522 Snow blower and test it in over a foot of snow
The Allis Chalmers 916H 1690575 hydraulic lift tractor has a Kohler CH730S 25hp replacement engine instead of the original 16hp that came on it.
It is the equivalent to the Simplicity 7116 tractor.
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#simplicity #kohler #snowblower #snow #gardentractor #smallenginerepair #individualizedrepair #smallbusiness #individualizedrepair
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.
Thanks for posting this! Just saved me from making lots of mistakes! Or plowing by hand.
Definitely! Thanks for watching!
I'm stoked because I just managed to buy a 42". Thank you so much for running a camera while you did this! According to the model number, that's a 916H. Do you remember if it had the 16HP motor? Reason being, I have a 912H, and the person I bought it from warned me that 12 might be underpowered for this attachment.
It did have the 16hp motor for sure! The customer had the RPM set really low on this otherwise it would have thrown twice as far. Some of the older guys don't like their stuff turned up. I talked to him about it but he asked me not to adjust it. I am sure with this running at the rpm it was your 12hp will probably run it good. Only one way to find out!
im gonna miss that this season ....😮💨
For sure!
GOOD OL HEAVY STEEL BABY ....DOIN WHAT WORK HORSES DO !!!
Snow chains would have helped a bunch...still went through it all well...
1691521 but seems there same diff widths 36s 42s but this one in video is a 1691521
Hmm that's strange!! Thanks for watching!
You might make a comment or anybody that's installing one of these you have to make sure that your pulleys and put in perpendicular actually linear with the frame of the tractor there's also a tab where that idler pulley goes in it can set off an angle for the lawnmower deck attachment it sits over at about 60° but it appears that this one's already set up with a pulley on the right tab that would be linear with the tractor frame it's important you can also hook up at 700 series Alice Chalmers or the other series whatever they call it in the simplicity if you get a wide pulley and use some washers to space it out far enough it will still work even though it's over at a 60° angle
That way you can just use the long belt all the way to the back and that belt I believe is 137 inches versus I think 148 it might've been 139 it's either 137 138 or 139 you might have to buy all three and figure out which one works the best on the 700 series but it is doable I think I have a video about it
Great tips!
I want a thrower for my JD 318
They sure are throwing machines!!