How To Replace Volvo Front Brakes P2 S80 DIY | 1999-2007 S60, S80, XC70, V70

Поділитися
Вставка
  • Опубліковано 3 кві 2022
  • How To Replace Volvo P2 S80 Front Brakes DIY | 1999-2007 S60, S80, XC70, V70
    Complete walkthrough changing the front brakes on a 2004 S80. This applies to all P2 Volvo cars ranging from years 1999-2007. We tackle the Rotors, Pads, Calipers, and Brake Hoses in this video. Volvo S60, volvo xc90, Volvo xc60, Volvo S80, Volvo Xc70 brakes. How to change brakes on a Volvo S80.
    Email: Mattdiy@aol.com
    Facebook: / mattdiy1
    Instagram: / mattdiy1
    #MattDIY #Volvo #Brakes
  • Авто та транспорт

КОМЕНТАРІ • 12

  • @MrSnobby24
    @MrSnobby24 Рік тому +1

    Thank you very much!
    All clearly explained.

  • @nestordupo845
    @nestordupo845 4 місяці тому +1

    I was so interested how did lose the hose from the brake line, I am going to change my rear brake of my volvo, as I can see it all rusted, I hope wd40 or 556 will help. Othewisr I am going to buy an induction heater, heater with flame I am not sure because its near the tank.

    • @matt-diy
      @matt-diy  4 місяці тому +1

      Make sure you use a fitting wrench and some heat/wd-40 if needed. It should come loose with not too much trouble.

    • @nestordupo845
      @nestordupo845 4 місяці тому +1

      @@matt-diy Thanks for your time.

  • @ProminentPotato
    @ProminentPotato Рік тому +1

    Man, this is helpful and nice to watch.
    When you're talking about compressing cylinders in 19:20 and saying that bleeding valve should be open in ABS brakes by then, can opening the valve and hence letting air into hydraulics be mitigated by just unscrewing the cap on braking fluid reservoir so there's no pressure buildup?

    • @matt-diy
      @matt-diy  Рік тому +1

      Thanks for the comment! That I’m not 100% sure but I have always heard with abs brakes it is not good to create back pressure into the reservoir. Better to blead them after letting fluid out.

    • @thatsonebadhatharry8610
      @thatsonebadhatharry8610 4 місяці тому

      You also don't want to push the old fuild back because most of the time it is black and contaminated from so many heat cycles. Unless you know for sure the fluid has been flushed recently I wouldn't risk it, even if it's an older vehicle with out abs you can still damage the master cylinder.

  • @insanebeatjunkie
    @insanebeatjunkie 9 місяців тому

    You already had you bolts busted out was that part hard?

    • @matt-diy
      @matt-diy  9 місяців тому

      Nope not too bad.

  • @humbertogonzales4645
    @humbertogonzales4645 6 місяців тому +1

    Dear Friend thank you for your help really We learn too much, thank for your time:
    and patience...a question pls : i recently have bought a Volvo S80 (Second Generation) with 69000 Kilometres, but i want to know How many milimetres must have the brake disc for be changed ? and other second PLS pls Could you send me a web site of a Spare parts store what be specialized in Volvo automobile because my car was produced in 2006 and i like change some old spare parts. unfortunatly in My country no exist too much spare parts store in Volvo because here 75% use Asian car.... Dear Friend thank you for your reply and grettings from Lima - Peru

    • @matt-diy
      @matt-diy  6 місяців тому

      Generally, you want to change them before they get to 2mm or visually inspect and change them before the pad gets to thin. I am not sure who ships to Peru, but you could try FCP Euro or Rock Auto. Thanks for watching!

    • @humbertogonzales4645
      @humbertogonzales4645 6 місяців тому +1

      @@matt-diy MANY MANY THANK YOU MATT