How to Fix ● KEURIG Coffee Maker that Stopped or Slow Brewing
Вставка
- Опубліковано 6 вер 2024
- I'll show you how to instantly fix your KEURIG coffee maker so you can have your morning cup of coffee! Easy to do and saves you money. If your KEURUG coffee maker has slowed down or is just trickling or has stopped dripping completely, you've come to the right place.Then I'll show you how to fix it so it won't happen again!
USA
● Socket and Ratchet Set .... amzn.to/2WlJxJm
CANADA
● Socket and Ratchet Set .... amzn.to/2K4CePx
or MY STORE
● www.amazon.com...
● www.amazon.ca/...
Full Transparency! A small portion of each sale goes from Amazon's pocket to my pocket with no additional cost to you! Thanks for your support. It's very much appreciated!
I never comment on videos but this has to do with getting me my coffee. I followed your instructions plus after hitting the needle on the paper I blew into it expelling more grounds then put back together. It works like new again. Thank you for such a helpful video
Once every eighty how to videos someone knows how to do it right. Straight to the point without overtalking Or unnecessary music. Even sped up where appropriate. Thanks. Bill
I try to do that in all of my videos. Thanks for that great feedback!!
When the blue button flashed this AM I pushed it and it became red then later went back to blue. Is that an issue of a quirky sensor? Somewhere? Thanks
I'm sure what that means. Sorry. I will check to see if I can find an answer.
This worked like a charm. I didn’t cut the zip tie though, I scooched it up and then scooched it down when it was all done. Works perfectly.
That’s great!!
My hubby saw this video and your comment, so he did that too. No need to purchase a 100 zip ties we won't use. Thanks!
I was going to say the exact same thing. No need to cut. Great video though. Thanks!
“Scooched it”! LMAO! Awesome!
Just fixed mine too. Good for another 10 years :). Thanks for the great video and I scooched it as well
OK I need to complement you on your presentation! Not a bunch of Intro’s “I’m the man and going to brag about myself for the first 30 seconds”, Not a bunch of Technical details on the Equipment “I purchased my KEURIG model K75 from Costco in 2008 or we removing two # 6 screws from the top Discharge Housing” but straight talk with easy to follow steps and lots of useful information - I’m subscribing to your channel sir, thanks
Nick J Alati
+Alati's Inspection Services LLC Well thank you for that great feedback! I try to get right to the point without all the fluff. Thanks for commenting!
Alati's Inspection Services LLC c.
This is the way all tutorial videos should be
I totally concur. Straight to the punch! I usually have to fast forward my way through these videos to get to the meat. Not here. Completely and immediately straight forward.
Just subscribed.
I hate my life but one thing that I really love is my coffee. And you sir saved the love of my life.
Thank you
Fantastic! Two very helpful hints. If you are having a problem breaking the first two screws in the video loose, turn the Keurig totally upside down and brace it so the area where the screws are is flat. Then pour a small amount of olive oil (enough so there is a puddle around the screw head) and let it sit for an hour or two. The olive oil loosens the screws and it is perfectly safe. Of course, you should wash it with soap anyway. Second, the little rubber gasket around the needle (approximately 1:27 minutes in the video) goes back during reassembling with the raised portion up and the flatter grooved portion down (2:24 seconds in the video but it is so fast it's very difficult to see). Excellent video and could have never done it without this vid!
Raising the bar for UA-cam instructional videos.
Well done, sir. Well done.
Wow, thanks!
"Here's how to brew a cup... go do that then we'll show you how to fix it."
You're a smart man, sir. Ty!
Thanks man.
Not being a morning person, at 3 a.m. I almost died when my Keurig wouldn't brew me a "fix". Watched your video, grabbed a paper clip, and am now sitting with my first cup of the day! After another cup, I will pursue the more complete fix, but for now....I am a happy camper. Thanks so much for such a straight forward video.........you are a God send!!!
I have never taken something like this apart before. Thank you for the step by step instructions, I was able to do it all by myself!!! AND its working again!!!! Thanks again for your help!
Most important part was seeing how the cover comes off after 2 screws from underneath. On mine, didn’t want to come off, and without video I wouldn’t have had the confidence to keep trying without knowing how those tabs were oriented.
Guessing some people have cracked those not knowing how it comes apart. Well done sir!
Try as we might, we couldn't even get those first two screws out. We finally just took the machine over to the sink, turned it upside down, and ran water through the pin area. Works for the moment...... lol
Thanks so much!! Was going to throw it out but thought I'll just take it apart and maybe I will figure it out. 3yrs later finally decided to do it. LOL After not getting anywhere from the bottom I thought I'll look on youtube and bam there you were. OMG!! Going at it the wrong way! LOL Can't thank you enough for taking the time to show us how to fix it. Saved the landfill. God Bless!!
The problem was I needed a cup of coffee before attempting to fix my Keurig. Enter Chris's video: "I'll show you how to brew a cup of coffee before fixing it!" Absolutely brilliant!! Thanks for saving me a bunch of money on a new coffee maker!
Indeed, coffee grinds clogged in the pipe/water hose. This worked like a charm! Thank you! ☕️
Your video saved me from having to purchase a new unit today. Thanks!!
I found this video last year and it worked like a charm. Then my new K15 had the same problem last week and I consider myself lucky to have found this fix again. This time I'm bookmarking it. Thanks Chris!
2 days of talking to customer service and all they could tell me is that my Keurig was broken and I needed a new one. I went to UA-cam to find videos that told (showed) me the same cleaning steps with a paper clip that Keurig told me. Luckily, I found this video to show me how to take it apart to clean it. You saved me about $100. Thank you so much. I’m a new subscriber.
You made the work look easy and it was. Thank you for not being over-talkative and for doing the video. My machine is like new again and I so appreciate you!
dang that was quick and simple! thank you! new owner of Keurig and I was shocked when it stopped working after 3 ish months. thank you !
When I tapped the needle section on a paper towel, lots of coffee grounds came out - way more than your one speck.
My Keurig machine is working now! Thanks!
I literally just dug my Keurig out of the trash. It made me angry enough to toss it in the bin! I dug it out, followed the steps, and got a huge amount of crud out that would never have come out with just cleaning from the bottom. The hose also had a ton of crud in it. Thanks - you just saved me a bit of money!!!!!
Thanks so much for the life saving tips! As someone just starting out in the adult work I cannot afford to buy a new coffee maker as good as this (which was a gift to begin with) and was so upset that I thought I had broken it!
I had already commented when you first saved my skin. Now, you've done it again. 😊 ☺️ Thank you. Much obliged. 😊
This video was perfect!! I was so happy to be able to take the coffee maker apart, put it back together and it worked!! I didn't cut the zip tie either. I just slipped it back on. Thank you sooooo much for this video!!♥ You saved me from buying a new coffee maker. Saving landfills one coffee maker at a time. :)
Thanks to this video which steps I followed and now my kureg is working fine. Hope I dont have any more problem after this
And here I was looking to buy a new machine. Thanks a lot. Suzie
You’re welcome Suzie.
Thank you! I was afraid mine was a goner, especially because it seemed to be leaking out the bottom along with not dispensing much water. This video was perfect! Straight to the point, step by step, and easy to follow. Thanks, again!
I searched a few useless results, particularly from Google which normally it's simply crap but your title tickled my curiosity and after trying your fix, well... It Fuc$!#! worked!!! All that resetting and reordering a water pump it's just bollocks, just a way to tell you, "you're useless, call for help" or simply replace your unit. Thanks for your input. I love the way you did your presentation, straight and to the point. Kudos to you, my friend. Ahh!! Coffee is back with my favorite mini cigars... Priceless. Sorry regular coffee pot, back to the storage bin.
That is Fuc$!#! fantastic !
worked like a charm! One differentiation I used was to not break the zip tie. rather, I used needle nose plyers to gently move the zip tie up the rubber tube. Thanks again!
Fantastic!
Thanks for that tip! That was the only part that scared me! Lol! Not sure I could actually replace that zip tie!
My wife was given a used B70 platinum that barely dripped. I tried running cleaner through it with no luck. I even started to take it apart. I took a break and watched this video. Sure enough it was plugged. I finished running the cleaner and got lots of particles out. It now works like new. Thank you!
That's great!!
The paperclip version worked like a charm. When I have time I will try the more thorough hose cleaning. Thank you!
Glad it helped!
I have a different model (K-90) with the same problem. Water comes out slow and down to a few drops. Found this video and went to work. Since it’s a different model, I couldn’t follow the exact steps. But I unscrewed a couple of screws and managed to open up the top part to expose the area where the plastic hose connects to the connector on top of the needle. I disconnected the plastic hose from the connector. Ran a cup of water as shown in this video. Then I connect another plastic hose I happen to have around the house and connect it to the connector for the needle. I just blew into the hose and got rid of the gunk in the needle. Tested it and verified everything is now working fine then jut put everything back together. Thanks for sharing and it helped me as well as many others.
To keep it clean once you’ve fixed it . Run vinegar through for a few cups once a month (and then flush well with water). This will help descale the machine and clean out build up and blockages.
I tried it again at work and I was able to get the top off I didn’t have to cut the zip tie I eased it up slowly and there was crud coming out the hose. And I was able to put everything back together and now the machine works fine no issues. Thank you
Omg! I was one click away from ordering a new Keurig mini. Glad I thought to Google how to fix a Keurig and fixed my machine in less than a minute. I will do the deep cleaning soon. Thank so much for such a simple video and saving me a hundred bucks!
Thank you! Saw your vid last night, fixed my Keurig this morning and canceled my order for a new coffee maker - saved $138!
Fantastic!
Mechanical genius! Took it apart step by step how you demonstrated and now I'm sitting here with my coffee feeling like Superwoman! Thank you! Will subscribe and tell others!
Although your video did not address my issue, I should say that the video itself was very good, in that you didn't waste time on superfluous filler. You are direct and purposeful. Well done.
That is great feedback! Thank you!
I was all prepared to go "Tool Time" on my coffee maker and replace the pump. I took the bottom cover off and saw the complexity and decided to search UA-cam. Found your video. You saved me hours of headache. Now I'm sitting on the back porch drinking my coffee. Thanks.
Thank you! I was ready to throw my Keurig out because this is the second time I’ve had problems with it not working doing the ten year ownership and just felt it had lived its best life. You solution allowed me to unclog and clean do til the water ran thru clear. You saved me more than $100 to replace it.
You are so welcome!
This fix works perfectly, saved my mom about $100. Thanks Chris.
Easy fix for me as I previously put a Keurig to the curb withe the same issue. Thanks for the great presentation. By the way , I am a 74 year old woman. Still have my skills.
Excellent DIY video! And thanks! Much appreciated. Why in the world would anyone give this a thumbs down???
This one worked! The key is removing the top needle and unclogging it from both sides, not just poking a paper clip up thru it like so many other vids. Thanks!
You’re a life saver!!! I thought I was going to have to buy a new one...very easy instructions to follow...thank you!!
My daughter's off campus mini Keurig stopped brewing so I gave her the old school Mr Coffee 4-cup and took hers home. I couldn't get the screws off so I just dug all around with the paper clip and it worked! Thanks for giving a let down a big fix-up!
Thank you SO much! out of all the videos I've watched, NO ONE said to clean the needle at the top!! It worked!!! I was ready to throw this thing away!! It's been clogged for months! Thank you!!!
Thank you for this! My bf was on the brink of buying a new Keurig when I came across this video and showed him. 20 minutes later and I’m happy to say our Keurig is working great!
Ours actually didn’t seem to have any blockage in the hose or needle but taking it apart and re-assembling it seems to have done the trick! THANK YOU 🙌🏼
That's great!
Yay!!!! I CAN'T WAIT TO TELL & SHOW MY HUSBAND I FIXED THE KEURIG!
THANK YOU, THANK YOU, THANK YOU!
We appreciate your video! Fantastic... I would add/change removal of the rubber (time stamp 1:26 within video) after the second set of screw removals. This way one does not need to risk getting cut by the needle to remove the rubber. Same as putting it back: once all parts are clean: put the rubber safely in place around the needle first. Thanks for your help!
Thank you!! Every UA-cam video I looked at was the 2.0 version. And I have this model. Couldn't find a video ANYWHERE!! It has stopped being. I will definitely give this a try.
This video saved me buying a new coffee maker. I had to buy a cheap small screw driver as none of mine fit the tiny screws, but then the easy to follow directions made the task simple. I kept the zip tie on the hose and just wiggled it off and on. Ran several cups of clear water through to get all the gunk out before putting it back together. Thank you!
That's great!! Yes.......the zip tie......I figured that out after I made the video that you can leave it on and wiggle if off!
This worked like a charm and was incredibly easy! Thank you for the video! My girlfriend is going to be so excited to see her machine working again!
Chris Notap; I am Luis again. I fixed my Keurig K10. I did every thing according your instruction, but the coffee maker did not brew. Before , I put together the coffee maker, I blow in the top hose and hear a little noise like "Tap", them , I pour cold water and I suck the water from the hose. I connect the coffee maker, put water, the water gets hot and brew in my cup from the hose (same way you did). Finally, I put the Keurig together and I brew my coffee and it is working now. Thank you Chris you gave me the first step to fix my K10 and now i am happy.
Sincerely Luis
Chris I got a brand new coffee maker tried to run my first cup and nothing came out!!!
For someone like me that has no idea how to fix things or do maintenance, this video is perfect. Thanks so much for uploading, I thought I needed to throw away my machine!!
The very first thing I fixed, I didn't know how to either. With each thing you fix under your belt, you get better and better. Keep going!!
My Keurig, single cup coffee maker, stopped working today. I searched youtube and found many videos with fixes, but the videos I watched were for larger, several cup models. Then I found your video. Thank you. Thank you. Thank you. Yours was the exact model as mine. I just followed your instructions to the letter. As I sit here writing, and sipping on my hot cup of coffee made from my newly repaired Keurig, I am a happy man. Great job. Thanks for sharing your information with the world. Java.
You are awesome!!!! Easy video and you saved my machine!!! Thanks for taking the time to film this!!!!😁😁😁😁😁👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
I have thrown machines away because of toys malfunction. Thank you for saving me from buying another! Works great!
Excellent DIY video. Quick direct to the point...thanks so much!!
Don’t often leave comments, however this video is extremely informative. Very easy instructions. My Keurig is working again and all is well with the world. Thanks for a great video!
Straight to the point without bs! Thank you!
Best video on this issue I've seen. I actually fixed my machine this morning after reviewing other UA-cam videos and websites. Then this one was recommended to me by UA-cam's algorithm. Thanks!
Glad it helped
I like the fast forwarding through the repetitive parts.
I try to do that in all my videos. Thanks!
You as saved me $80. I wish I had this knowledge before we pitched our last Keurig. Thank you for a well filmed informative video. You the man.
I was about to throw out my coffee maker, thanks Chris👍🏼
I just used your video to fix my coffee maker this morning. Thanks to you I’ve saved about $80. Thank you for taking the time to make and post this video.
You are so welcome!
LOVE how you lead with a quick clean for your first cup. MAN I love the internet... I love you.. I love coffee AHHHH!!
THANK YOU!!! I had descaled, cleaned, turned the machine upside down & 'burped' it - nothing working. Taking the machine apart as Chris shows in this video was the only thing that worked! I was able to get the little clump of coffee out and the machine is working again. Excellent instructions given in this video - it really was easy to do with this step by step, simple to follow video. You truly saved me from running to the local coffee shop and then to buy a new machine! Time well spent to save money and most importantly, get me my coffee!
Wow!! Thank you for that! Glad it helped you.
Well this one was the perfect fix for my Keurig. Did exactly as the video showed and all is well. Thank you! And a very well done video without 5 minutes of excess talking about things that don't relate. So many videos could be much shorter. This one was perfect!!!!!
I've watching over 20 different "how to fix my Keurig" and became so discouraged I gave up. But this morning for some reason I said to myself, "watch one more video" and came across your video. You are heaven-sent! Your tutorial is outstanding! I can't wait to get a zip tie to start the process of fixing my machine.
Thank you so much!
I have learned since doing this video that you don't need a zip tie! Just pry the hose off with the old zip tie on it and just push it back on when you're re-assembling! Hope that helps and thanks for watching!
@@chrisnotap You are ... "The best of the best"!!!!!! Much thanks!!!!!
This fixed my problem! Thank you!!
what country are you from
I thought I had a electronics problem and was ready to dump it. Tried this not thinking it would work and it did!! Thank You!
This is an outstanding job/video. It is an A+ Simple, clear, effective, results delivered. I am most impressed and happy. In fact, I am going to search the video(s) to see if Chris has one about fixing my wife. She has been worth a sh_t, for years. Thank you Chris!
Glad it was helpful!
Thank you, thank you, thank you! I was on the verge of tearing up a k-cup and dumping it in a tea ball to get my fix. And I do not have a problem, I can quit anytime if I really wanted to...
As a follow up to my previous post: I pulled the hose from he needle valve, and then got brave and applied suction to that hose really hard (hold the jokes fellas)...and was able to pull through whatever was blocking the lower end of that hose. SAFETY NOTE: If you've just attempted to brew a cup, empty the machine out and add cold water before trying the suction method. I just burned off half my taste buds. :-/
Chris, thanks for taking time to post. Hope this additional info helps the next guy.
I just burned both of my arms because the water started overflowing and l tried to turn the machine off. Now I'm sitting with ice on both arms. I'm glad it's just my arms. But I got it done.
Thank you!!! I was on my way to Target to buy a new Keurig - when I thought let’s see if there’s a video about this problem. Worked like a charm!
This fix did not work on my keureg. I had to fire up my air compressor and blow 30 psi of air into the hose reverse direction to unstick the check valve. Then ran 8 cups cycles of vinegar through to clean mineral out. Works good after that. Sometimes you just got to get extreme.
I think I have the same problem. I didn't use it for 2 years and now when it is running water doesn't even come to open hose. Did you blow air while running? I guess it wouldn't be safe while running. I will try it today.
I just wanted to thank you. I don't have the same model Keurig - but your video concept helped me apply the method and created a short-term solution! Now, onto creating a long-term solution for my Keurig Mini!! Thanks again!
Exact same machine that I have. Thanks for the help!
I was about to toss this exact same machine because someone put a scoop of coffee in the water hopper and I thought the pump was clogged up. I didn't scooch as I have 9487 zip ties at my disposal! Well 9486 now.
I ran multiple "flush" cycles to get all of the grounds out. Works like new now. Thank you! Ya'll Don't forget to smash the subscribble button!
That's great!!
Thanks for saving me $70 for a new one!
This was very helpful. I took the whole thing apart and now my little keurig is back in tip top shape. thank you.
Worked like a charm
Fantastic!
I thought this was going to be one of those “he fixed his problem but my problem is different”... no so! Took five minutes and my morning was back on track with a hot cup of coffee...thank you brother!!
Great video but who has an extra 4 inch zip tie on hand?
You can do this without cutting the zip tie, just pull on the hose slowly. You can easily put it back on, I just got done doing it.
Walmart
me weirdly enough
Just about anyone I know... and any hardware, automotive, Walmart, K-mart store for example.
kind of the point of mentioning it in the video so you can go purchase one before you go hands on.
Excellent info. Thanks. An extra step, as mine seemed to 'die' after doing thorough cleaning: put clean water in reservoir, place cup but no coffee pod, press and HOLD flashing red brew light till cycle finishes. 'Seems' like quick way to force out fresh grinds.
You'll find the tools you'll need here! www.amazon.com/shop/chrisnotap
What is the ratchet driver you used in the video?
Great video. I got a good improvement after the paper clip step, and went ahead and tried to clear the hose.
I got a SHOCKING amount out of the hose, and now the machine works like a champ! Thank you, sir!
I'm a tutor; if I can repay with some math lessons, don't hesitate ;)
Nice work!
i have to be thomas edison to make a cup of coffee
Found a Keurig machine in a dumpster while dumpster diving, turned on but dripped slowly... after watching your video this old machine is now working like a brand new one! Thanks for the help!
Hi, I just wanted to thank you for a great video. I could not find instructions for unclogging my machine on any of the Keurig sites and was poised to buy a new one, but my husband watched your video and felt he could do it, even though he's not generally a handyman-kind of guy. It's all unclogged and clean now. Thanks again!
I use vinegar once a month to descale my Kuerig. After putting it away for a month (had coffee guzzling guests) it would only drip a little at a time.
I tried Chris's paperclip trick and AMAZING! coffee again! I will definitely add this tip to my monthly cleaning :-)
Years later this is still saving mornings! Thank you for this video.
Thank you so much for your tip. I used paper clip to clean my coffee machine and it worked. Thanks again.
I love you Chris Notap! I fixed my MIL machine. Great clear instructions ⭐️⭐️⭐️⭐️⭐️
Glad it helped!
Even though my coffee maker is a little newer than the model you show, I was able to follow your instructions and figure out how to fix my uncooperative Keurig! This 75-year old grandma feels undefeated and oh, so happy that your video saved me the repair or replacement expense. Thank you!!
Thanks for sharing, i just now went and did this to my Keurig and it worked😀 I so love YT for things like this, i was frustrated because i only had it a month.
Best tutorial on anything I've seen on UA-cam ever
Dozens of videos out there but this is the first I've found that shows you how to actually fix the thing instead of just tinker with it. Excellent!
thank you, thank you, thank you. Your video got my household thru it first and hopefully last Keurig crisis. We just got our very first Keurig on Black Friday and have fallen down the Keurig rabbit hole, leaving the old method in the dust. This morning it was a scramble to make coffee without it. But your video made the world right again.
This well produced video gave me all the clues necessary to de-crud our mini machine.
I realize now that some water return siphoning action can pull some coffee debris from the finished k-cup brew back down into the bowels of the machine. The check valve or whatever must accumulate this crud over time till the tube is plugged enough to stop the full slow towards the k-cup. I am glad I did not have to take more of the machine apart ! Thanks
Glad it worked out.