Big fan of these bed extenders. Had one on my old truck and bought one for my new one. Saved me over $200 bucks from the shop thanks to your video! Installed it myself easily.
Thx for the installing video great help in my decision for this extender also watched your video on screening you found for that is excellent I will be ordering them both.
I was just blessed with the AMP Bed extender but friend didn’t have the hinge diagram that came with it. I’ve searched trying to find it but no luck. By chance can you help me out? Thanks either way!!
You give props for it being made in the USA, but you're installing it on a foreign truck. Even if it's ASSEMBLED here in the U.S. it's still a Japanese truck.
Hi for the self tapper screws did you do 3/4in or 1/2in? Comments say 1/2 inch But the amazon link on your video description shows 3/4inch Thank for your video!
Those were 1/2” I believe. Here is where I got them on amazon. #10 x 1/2" Stainless Hex Washer Head Self Drilling Screws, (100pc), 410 Stainless Steel Self Tapping Choose Size and Qty www.amazon.com/dp/B076BWD954/ref=cm_sw_r_cp_apip_ZvLUAJtpWhhrO
@@Archifx nice. So can load the bed with stuff 3/4 full then stick the amp on and continue filling.. since with the amp down you won't be able to slide stuff to the back. Going to order on with the drillless kit.
It would be nice if these extenders weren't rounded at the end and they came out square like the tailgate does for maximum usage because we're paying money for it so stop rounding the corners off when they make them so I'll make my own cause I can. I have a welder. I have a fabrication shop , and put it on the market. Let's see what happens.
What are you talking about? Truck is 💯 made in the USA amateur. Read a book for once. Maybe you’ll learn how to comprehend words and understand how they make facts
Yep typical internet hero that knows nothing. San Antonio boss man. American workers in supporting while buying a quality truck. But, keep commenting. You sound so smart 🤔
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Big fan of these bed extenders. Had one on my old truck and bought one for my new one. Saved me over $200 bucks from the shop thanks to your video! Installed it myself easily.
Solid install and review video from start to finish. That punch trick was quality. Keep the vids coming.
Thx for the installing video great help in my decision for this extender also watched your video on screening you found for that is excellent I will be ordering them both.
this was a great video, my husband is buying one and he was thinking the same with the bolts.. safe tappers great idea
Nice, clean install. Ever think of screwing in a mesh screen onto the extender? I might try that after I pick one of these up.
Yeah. I made the video on that that you’ve probably watched already ;)
I was just blessed with the AMP Bed extender but friend didn’t have the hinge diagram that came with it. I’ve searched trying to find it but no luck. By chance can you help me out?
Thanks either way!!
Great video, thanks for putting it together!
Do you mind posting what size of the self tapping screws you utilized? Thanks.
Can this bed extender be removed easily? Or is it pretty much permanent ?
Did you need to user the spacer kit?
Thanks Brother! That made it super easy 🤙🏻
Perfect video, I am buying this!
Interesting my factory one used the bolt from the box tie down? I'm not drilling into the box.
I just ordered this for 2022 Tundra TRD Pro. It's on Amazon free shipping.
Hello I have tail cage is 4’7” Wide Does the only thing I have where can I buy can I do to fit the fit N150
You give props for it being made in the USA, but you're installing it on a foreign truck. Even if it's ASSEMBLED here in the U.S. it's still a Japanese truck.
I know. I wish it was totally Japanese
It’s much more American than the big three. Do a google search
Nice video! I be getting one of these!
In the description you include a link for “black mesh used in the video.” I don’t see where you used mesh anywhere in the video. Did I miss something?
It’s in this video ua-cam.com/video/mNaPUh-yPyo/v-deo.html
What's the height of the two uprights? Trying to figure out if it'll clear my Roll N Lock.
Hi for the self tapper screws did you do 3/4in or 1/2in?
Comments say 1/2 inch
But the amazon link on your video description shows 3/4inch
Thank for your video!
What is the size for the self tappers?
Those were 1/2” I believe. Here is where I got them on amazon. #10 x 1/2" Stainless Hex Washer Head Self Drilling Screws, (100pc), 410 Stainless Steel Self Tapping Choose Size and Qty www.amazon.com/dp/B076BWD954/ref=cm_sw_r_cp_apip_ZvLUAJtpWhhrO
Hello. Is this bed extender compatible with a Retraxpro xr tonneau cover?
As long as the brackets and the cover are above the rail
Can it be easily stolen if someone lifts it out the bracket with the tailgate up?
Sure could.... but I’m sure something could be fanned up to block the jerks. Plus it’d be pretty useless without the mounts.
If the tailgate is locked you can't get the extender at a 45 degree angle to get it out.
Can you remove it if say you have a bunch of lumber that is longer then the bed and tailgate.?
Thanks for reply
Yes. Pulls right off at a 45 deg angle. No tools needed.
@@Archifx nice. So can load the bed with stuff 3/4 full then stick the amp on and continue filling.. since with the amp down you won't be able to slide stuff to the back. Going to order on with the drillless kit.
so I am assuming by using the self tapping screws you don't need to remove the taillight and tighten down from inside per instructions?
How hard is it to remove altogether? For instance, to load a riding mower or dirtbike that needs to take up the entire bed?
Easy. It just pulls right out the. Sets back in. You rotate it about 45 degrees and lift up
@@Archifx Can you post the model number. Great video!
Just curious, what are the straps for?
To keep it secured down but they don’t work with the tundra tailgate. I never use em. You’ll be fine.
@@Archifx gotcha, I appreciate the response
Can you have this extender with a bed cover
Yes. It sets beneath the bed top.
Hey I just ordered one myself just wondering what size the sell tapping screws are?
Thailand is not have this product for truck.
It would be nice if these extenders weren't rounded at the end and they came out square like the tailgate does for maximum usage because we're paying money for it so stop rounding the corners off when they make them so I'll make my own cause I can. I have a welder. I have a fabrication shop , and put it on the market. Let's see what happens.
Made in the USA, except the truck
What are you talking about? Truck is 💯 made in the USA amateur. Read a book for once. Maybe you’ll learn how to comprehend words and understand how they make facts
These bed extenders are way overpriced for what they are. 300$-400$? it's just absurd. The aluminum used alone isn't even 60$ worth.
Thanks for supporting Japan by buying the Tundra!!
Tundras are made in the Texas
Yep typical internet hero that knows nothing. San Antonio boss man. American workers in supporting while buying a quality truck. But, keep commenting. You sound so smart 🤔
Wasn’t directed at you tjh7797. You’re awesome. Was talking to the tool djchris lol
@@Archifx Guess he'd rather you buy a Mexican Ford.
The Toyota Tundra is the most American Made truck in America! Duh do some research jack! UAW blew it!