How To Replace Power Window Regulator 05-09 Chevy Equinox
Вставка
- Опубліковано 14 жов 2024
- Buy Now!
New Window Regulator from 1AAuto.com 1aau.to/ia/1AWR...
1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or damaged window regulator. This video is applicable to the Chevy Equinox, years 05, 06, 07, 08, and 09.
This process should be similar on the following vehicles:
2005 Chevrolet Equinox
2006 Chevrolet Equinox
2007 Chevrolet Equinox
2008 Chevrolet Equinox
2009 Chevrolet Equinox
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oW/1AXA...
• Phillips Head Screwdriver 1aau.to/oW/1AXA...
• 10mm Socket 1aau.to/oN/1AXA...
• T30 Driver 1aau.to/oi/1AXA...
• Ratchet 1aau.to/oaa/1AX...
• Socket Extensions 1aau.to/oQ/1AXA...
• 1/2 Inch Drill Bit 1aau.to/oc/1AXA...
• 1/4 Inch Drill Bit 1aau.to/oc/1AXA...
• Drill
• Center Punch 1aau.to/od/1AXA...
• Hammer 1aau.to/os/1AXA...
• Putty Knife 1aau.to/oe/1AXA...
Subscribe: / @1aauto
Check out our playlist:
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
How to Replace Window Regulators with Parts from 1AAuto.com: • How to Replace Window ...
Chevy Equinox 2005-2009 1st gen: • Chevy Equinox 2005-200...
For More Info visit us at 1aau.to/h/ac/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Навчання та стиль
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Over 5 years later, and this video is still helping folks get repairs done. I can't thank you enough for posting this detailed replacement video. I had to go over to my parents today, to replace my Dad's '08 Torrent rear window regulator assembly. Thanks to this vid, I knew exactly what to bring along (including my T-30 bit and my drill). I would have never expected to have to drill out rivets, as my '06 Grand Prix didn't use rivets when I replaced those regulators recently. Everything went quite smoothly, thanks to the preparation you gave me.
I was concerned that there would be significant differences between the Front and Rear driver's doors, but the only extra step I had to take was to remove a T-30 screw holding the door handle assembly in place, slide it over just a bit, pop the two wire rods out of their plastic guide holders and let it drop down a bit, so I could access the smooth-faced rivet, which was hiding behind rods going to the door latch (they come straight out from the handle on the rear door assembly). Didn't have a punch, so tapped the smooth rivet a few times with a Phillips head screwdriver to make a tiny divot, and drilled through the head easier than I expected with a 1/4" bit.
Only snag I ran into (my fault)...when trying to replace the motor, I couldn't seem to get it seated correctly. Took me a couple of minutes to realize I forgot to remove the tie-wrap off the transmission wheel, before mounting the regulator and clipping it in place. (DOH!) Luckily, I was able to reach inside the transmission hole with a knife, carefully cut the tie-wrap and pull it out, without having to unsnap the transmission or unbolt the regulator. The motor slid right into place after that, and everything worked great after I was done.
Sorry for the long comment. But thanks for making me look like a hero and saving my Dad some $$. He paid over $200 to a dealer to fix his front window several years ago.
+Tom Baddley Thanks for watching, Tom, glad we were able to help! 1aauto.com
Thank you for the video! I went to your site and bought because of the video. Appreciate the time you took to show everyone how to do the work.
Great video followed it step by step and window works (2009 Equinox). Interestly, the regulator I replaced was not factory issue so no drilling. Part from 1AAuto was perfect fit. Just because replaced motor also. Much easier to do than I thought it would be total labor time probably less than one hour. Thanks.
Thank you! Very Grateful for your instructional videos!
Very good video. Just what I needed. I had an autoglass place replace my 09 Torrent motor and said the clips did not line up with the new part. Hard to find (drivers' side window) original parts. Everyone had the same replacement part. No OE at junk yard so far.
Thank you so much for this video! This saved me a bunch of time and money today. The only snag I ran into is that the cable was tied up around the clutch and I had to remove the entire panel to bang the motor out with a hammer. Other than that, it went flawless.
No problem at all,thanks for stopping by. Have a great day! 1aauto.com 888-844-3393
My motor for passenger front door went out. Is there an 1a auto video on replacing just the motor? There was no popping noise at all. Just stopped working one day. Won't go down at all or make any noise like it's trying to go down. I checked all the wiring and it's good.
It looks like the power window motor is not serviceable on this vehicle, you would need to replace the whole window regulator. We carry new ones on our website with free shipping.
If you need to replace the regulator you'll need to take the window motor out anyway, it would be a good time to replace it. Hope this helps you out. 1aauto.com 888-844-3393
This is so helpful thanks so much iA service guys!! Quick question. Do you have to replace the motor and regulator at the same time??
Thank you so much this really helps
+Elijah-James Smith Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I did this replacement but my window doesn't seem to line up correctly and stops midway while rolling up, is there a broke rail or something to either side that I need to fix?
Thanks alot
This was very helpful so thank you!
I changed the rear driver side so maybe it’s a little different?
I did not use the 1/2” drill bit. It only required the 1/4”
1/2” would’ve been too big. Maybe I got a closer matching regulator to the original??
Anyway just thought I’d share. Thanks again!
y tambien a mi me sirvio mucho, gracias por la informacion
Nice video. Very helpful. Question though. Is it possible to find just the plastic clip that holds the window to the regulator? Mine appears to be completely gone. Thanks!
If I understand you and this is the clip you push to release the window and it is broke off like my grandsons was-we just now finished fixing this problem by using some large zip ties going through that hole for the clip from the backside and down to the back and back through one of the side holes towards the door skin side, tightening up the zip tie and then cutting off with diagonal cutters about an inch from the zip tie grip. We actually put three in while we were there just to make sure. It works great now! Maybe GM should have done this during assembly-beats their clip that breaks off!
I know you did asked this 6 years ago-but maybe someone else might need this.
@@showsomerespect1433 Thank you so much! This helped me! The clip broke off for me and your comment helped!
informative lol guarantee id break ever single clip.
So my driver side window power button don't work then handle loosen won't open door so if power window button not working is it the switch or regulator how you test witch one needs replaced.
It might not be a serviceable part. We carry new window regulator assemblies, if it's not repairable. 1aauto.com 888-844-3393
Is the cable lose when it's bad?
I can’t get my hatch (‘08Torrent) to open at all. When I got it, I didn’t realize it was defective and it only worked some of the time. Now it doesn’t work at all. My automatic locks don’t work properly either.
Suggestions please???
I think thats just a torrent for ya. Mines the same seems like its all starting to crap out.
Same on my equinox
What's the name of this actual part you used? I am trying to locate it on the website
Regulator
thanks man
ok need help I was replacing my license plate bulb and the bulb went in to the car how do I get it out before I get pulled over I have a 2005 equinox
We currently do not have a video on that particular repair. We'll keep this request in mind in the event that we need to perform this repair in the future. 1aauto.com 888-844-3383
How do I get my window back up in my Chevy Equinox the passenger door side window is down and the inside of the car where the little knot of the little knobs are one of them is broke to the passenger door the part that lets the window up what do I do
+Nina Hernandez You should be able to take your door panel up and wiggle up the glass until you are able to get a new window regulator inside it.
How much would a job like that cost.
+Louis Holland It would depend on the hourly rate of the shop. 1aauto.com
$300 easy.
I'll do it for 50 bucks
These answers are all true all of the above
Wow I'm just going to fix door handle. driver window broke know passenger window going badly time trade it in and buy Toyota or Nissan sadly you would think doors would be last thing that breaks.
+Louis Holland Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowRegulators/Chevy/Equinox/1AWRG01717?UA-cam&CTA+Comment&KrWenBY
Hey, you blocked the camera from seeing what you did.. 👎👎