David, Instead of using canvas as a "receiver" get som metal sheets and prime them. They should hold up a bit better when they're being hit. Might even result in some interesting shapes.
For the paint tubes; pour some of the paint out and cut off the top so it is wider, this will stop the paint from coming out the bottom, giving you a a bigger splash!
Very cool episode, the slowmo foortage is mesmerizing, thanks for the upload! Also you can tell David is a massive plane nerd when he's able to identify a flying jet by the sound of its engines :]
I have an idea for rocket art! Put servo triggers on spray cans to make clouds of paint in air, then rocket power the canvas through the paint in the air. If you put a board tight to the back of the canvas it should survive
you need a LOT more canvases around the impact!! (like a sort of "cone" of them around the impact area.....) for where you're smashing the paint in the small bags....try the same idea but use paint balls taped to the board to see if you get better dispersion...
the primed metal "canvas" is a great idea. But I am still intrigued by the flat unfolded FT limited edition kits hit with Rocket Art. BUT ROCKET KNIFE VS. a CAN OF STROMSTOMMING. STURMSTOMMING?? STINKY FISH?
Put a frame arround the blaack red back one on the green side applied a strip of leds lets check the results and for the ones paintend arround a smal motor to make them spin on a high seeling should give a nice effect hope you like this sujjestions keep the nice work going
David, ever thought about how bad an idea it is to have Microphones that work on the same frequency as your trigger mechanism? Would be pretty easy to fire it accidentally. Playing back one of your recordings where you hear the interference into the mic may be enough to fire your trigger.. Worth trying, and maybe getting a better trigger ;)
More specifically the Mic is a wireless mic. The trigger works on a similar, if not the same frequency, causing interference that gets turned into audio by the mic. Interestingly, this is the exact "noise" the trigger makes when firing. If you modified that "sound" the receiver wouldn't recognize the trigger, and wouldn't fire.
so. would you consider a trade? that big white orange and green blue one and I send you something 3d printed to rocket knife? something ... big ... :-) maybe. just maybe. how about you rocket knife the moon with little marvin aliens or something inside. I can print a 16" diameter moon and fill it with "other" 3d printed stuff ??
David can I come live with you? Please, pretty please? I can pretend to be your Danish cousin. Everything here in the US sucks. It's hot and we have a Cheeto for a president. Everything is falling to bits.
nerdalert226 oh, that's good news. I'm really skilled at raping. I'll fit right in. No, actually that claim is due to how Sweden records and defines rape. For example many cases of "rape" in Sweden would be considered "assault" in most other countries. They also consider separate incidents as separate cases of rape. If a women was raped twenty three times by her abusive husband over ten years, in Sweden that's twenty three rapes. In the us that's just one case of rape. I also have a HUGE problem with you saying "due to immigration". The reported cases of rape have actually dropped in Sweden as immigration continues to increase.
Here's one of many. Literally the first result on google. www.politifact.com/truth-o-meter/article/2017/feb/20/what-statistics-say-about-immigration-and-sweden/
This might work better with a slower moving rocket paint system. The current system seems a little too violent and results in unpredictable and destructive application of the art media.
Another amazing video. I love the lady you have with you, she really makes them come to life with her total enthusiasm for your work bless her.
David, Instead of using canvas as a "receiver" get som metal sheets and prime them. They should hold up a bit better when they're being hit. Might even result in some interesting shapes.
they are all beautiful... youve discovered a new art form.. and its fun art.. love yallllllll
you can even make photo prints of the montage of pieces showing the paint trails across several pieces....wow..slow mo pics..a thousand different arts
The cyan and yellow slomo shot was so gorgeous 😍
Great vid guys! Hope you never stop playing with this stuff. When you can do this in your backyard you know there is freedom in the world. Go Sweeden!
You rocket my world............ 😏 keep the vids going dudes!! Absolutely buzz when a new one pop up ✊🏼 🚀
For the paint tubes; pour some of the paint out and cut off the top so it is wider, this will stop the paint from coming out the bottom, giving you a a bigger splash!
Who wants to bet at some point his art will become known the world round and start a whole new trend with the artsy people.
I like the stark landscape, with the red swarm rolling in.
Cool! Please do powder paint!
Very cool episode, the slowmo foortage is mesmerizing, thanks for the upload!
Also you can tell David is a massive plane nerd when he's able to identify a flying jet by the sound of its engines :]
This never gets old! So cool
GLUE more leaves on there ..its gorgeous
hahahhaa yall are so much fun
Henrik is a f--king god. Don't kill him with your rocket knife
if you ever display these in an art gallery you might find it cool to put a QR code linking to each video
Your bench is the best work of art
So rad! I want a painting!
that was so awesome thank you for sharing
You should make rocket art T-shirts!!!
David, i'm calling dibs on the Black and white (Grey) one :-) I want that one, would look great in my room :-)
Skydive4ever your dibs have to be more than 250 US dollars
Newton's Third Law of Art - every spray-can has an equal and opposite spray can.
the last one was nice!
Looking forward to the auction :)
Rocket Can. ... Nice!
I have an idea for rocket art!
Put servo triggers on spray cans to make clouds of paint in air, then rocket power the canvas through the paint in the air. If you put a board tight to the back of the canvas it should survive
Can you cut a bag of flour and have an ignition source close by?
you need a LOT more canvases around the impact!! (like a sort of "cone" of them around the impact area.....)
for where you're smashing the paint in the small bags....try the same idea but use paint balls taped to the board to see if you get better dispersion...
I died laughting when you did the "results"
Beautiful picture
the primed metal "canvas" is a great idea. But I am still intrigued by the flat unfolded FT limited edition kits hit with Rocket Art.
BUT ROCKET KNIFE VS. a CAN OF STROMSTOMMING.
STURMSTOMMING??
STINKY FISH?
Try putting the canvas between the board and the rocket. i.e. Make the canvas the smushing-target, but have boards behind it to make it solid.
Put a frame arround the blaack red back one on the green side applied a strip of leds lets check the results and for the ones paintend arround a smal motor to make them spin on a high seeling should give a nice effect
hope you like this sujjestions keep the nice work going
It is only ballistic at the speed of sound David. There would be a sonic boom. Fun tho
Rocket knife vs Shaolin monk next, please
Put the leaf back, it made the piece!
I wish I had friends like you guys/gals...
Now just add some Bob Ross trees :)
David, ever thought about how bad an idea it is to have Microphones that work on the same frequency as your trigger mechanism? Would be pretty easy to fire it accidentally. Playing back one of your recordings where you hear the interference into the mic may be enough to fire your trigger.. Worth trying, and maybe getting a better trigger ;)
The white canvas looks like a scene painting.
ROCKET AAAAAAAAAAAAAAAAART
Please make some more RC videos.
Yeah
he should launch a glider with this rail!
NPJdirtbikes, YES
NPJdirtbikes
Oh hell yeah! Have to be some mad carbon yoke though!
Oliver Ayres, lol
"oooooooOOOOOOOOooooooooh" is the new "OH WOOOOW".
What hasn't changed is the tendency to overdo these exclamations.
I want to buy it, and I want to buy it NOW!
Put some tape on the canvases, peel it of after it has dried 👍🏻👍🏻
Hi David, great video. How did you make the remote switch?
That moment when "ROCKET ART" screams from your cubicle...
Tim Creque is that the same as testicles
FPV THE ROCKET KNIFE!!!!
"Rocket ART!" lmao
wild style
You HAVE TO try 100 glow sticks vs Rocket Knife at night!
t-shirts yeah tie-dye just paint t-shirts so sweet
Green good 😃
Rocket baseball bat!
Why does the mic sometimes go crazy after the rocket goes?
Hj Aviation his remote trigger is still turned on from activating the rocket. That signal will be interfering with the mic.
Jup. The Video mic go sucks in that aspect
More specifically the Mic is a wireless mic. The trigger works on a similar, if not the same frequency, causing interference that gets turned into audio by the mic. Interestingly, this is the exact "noise" the trigger makes when firing. If you modified that "sound" the receiver wouldn't recognize the trigger, and wouldn't fire.
Black velvet Elvis painting.
Have a show at some stuffy art gallery and you just might strike big.
Its so funny you can always hear the 2.4 ghz remote
Yeah the Röde video mic go sucks when it comes to RF
i love these videos, but please migrate back towards rc
No worries. Don't have too many episodes left. Already working on some RC stuff
David Windestal have Janet do the South Park for a t-shirt art episode please
Make a rocket chainsaw. Build a big enough sled and strap a chainsaw on it.
Please do a Rocket Knife vs Car Tire
so. would you consider a trade? that big white orange and green blue one and I send you something 3d printed to rocket knife? something ... big ... :-) maybe. just maybe. how about you rocket knife the moon with little marvin aliens or something inside. I can print a 16" diameter moon and fill it with "other" 3d printed stuff ??
where do you get pants with outer top pockets?
i need those
everybody signature please and the dogs just dip his paw in paint thank you
Was this rocket knifes last video?...
davids french accent XD XD XD
Si me speak very good croissant
perfection
David can I come live with you? Please, pretty please? I can pretend to be your Danish cousin. Everything here in the US sucks. It's hot and we have a Cheeto for a president. Everything is falling to bits.
Sweden is the rape capital of the world due to over-immigration...
nerdalert226 oh, that's good news. I'm really skilled at raping. I'll fit right in. No, actually that claim is due to how Sweden records and defines rape. For example many cases of "rape" in Sweden would be considered "assault" in most other countries. They also consider separate incidents as separate cases of rape. If a women was raped twenty three times by her abusive husband over ten years, in Sweden that's twenty three rapes. In the us that's just one case of rape. I also have a HUGE problem with you saying "due to immigration". The reported cases of rape have actually dropped in Sweden as immigration continues to increase.
"The reported cases of rape have actually dropped in Sweden as immigration continues to increase." *Source please.*
Here's one of many. Literally the first result on google. www.politifact.com/truth-o-meter/article/2017/feb/20/what-statistics-say-about-immigration-and-sweden/
Life is what you make it. Could easily do this stuff in the us. Or you can sit around and feel sorry and blame. It's a choice.
@8:31 lol
This might work better with a slower moving rocket paint system. The current system seems a little too violent and results in unpredictable and destructive application of the art media.
James Burleson but that's not the point the point is speed
Wait, you guys are selling the art right?
10 coment 14 like
Seventh
Did the UA-cam fame get you that gorgeous girlfriend? Jk
Probably the sexy beard though.
Någon annan svensk här?
David what did he say
i like what you are doing ,but i wo6ld call it artificial instead of art....
YOU CAN NOT EXPLAIN ART... FROM A ROCKET KNIFE!!!
Please stop the earrape intros
English please? No! Teach us Swedish!!
I am swedish
RC!!?!?!?
No more Donald bashing please
Hi