this white devil is so badass. done with those 6 ep too. just got mine this morning, and finished it now. surprisingly hv decent articulation for HG. i am not gonna put the stickers. still waiting for water slide to come next January tho. but yeah,..this kit is HG but tastes like RG (almost). planning to build the Akatsuki oowashi i assume?
I agree this is the best if not one of the best hg kits out there. I would love to build the RG akatsuki, but as of the moment I’m planning to build at least half of my backlog and decided not to get any more kits until I am able to do so (running out of storage space). Thanks for watching!
Thanks for watching! I’m not a pro on this but I’d be happy to share what I know. Is there anything specific that you want to know? or is there a specific part of this video that you might have questions? My setup kind of varies depending on the situation. You can send me an email in the about section of my channel. Good luck!
Thanks for watching! That could be more efficient. I guess It is just easier for me (video editing-wise) to complete each build segment before moving onto the next.
Hi, great video! just want to ask, do you not sand after cutting out the remaining nubs? and do you straight panel line them with gundam markers right after you cut them? just heard from others that it might crack without topcoating. thanks for answering 😊
Thanks for watching bro! I use a glass file for cleaning out most of the nubs after the 2nd cut and I use sanding sponges and a hobby knife for nubs that are on tight spaces as well as nubs that are on concave surfaces. For panel lining I’ve done more than 50 kits without applying a topcoat. Gundam markers should not be applied on ABS plastics but works fine with PS plastics. Most new kits use all PS, ABS plastics are usually used in older kits especially on the inner frames do take note to check the runner label for that. I’ve even used tamiya accent liner without a top coat which is more corrosive than gundam pour type marker but never had any issue at all. A general rule of thumb is to apply the panel liner before building the parts, I think this is the problem most of the time for people having cracks on their kits, it tends to seep through the seamlines and crevices which end up pooling inside the parts prolonging the drying time soaking the plastic longer and ultimately weakening it. Hope this helps!
Thank for watching! How was your build experience? I was surprised that it would be very simple but the end product gives a lot of articulation and a lot of intricate posing.
@@Plamo_House sorry for the late reply but yes build experience very fun and enjoy. Articulate is great but stickers are a bit hard to put on, sorry for bad engish
Hey your english is fine, no need to apologize for that. Yeah the stickers are a bit of a pain. I decided not to put the shield stickers, I plan on painting it sometime.
I do have a stack of master grades in my backlog. Will start building those sometime. I’m trying to be consistent on my uploads while working my dayjob and I find it would be hard to do that If I start doing longer builds. But I will be building those at some point. Thanks for the suggestion!
Thanks for tuning in! Current work in progress is solari’s zaku next would be HG murasame kai. Unfortunately I don’t have the 3 kits you mentioned right now, But will keep an eye on those on my next purchase. 👍
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
This definitely looks to be based on my favorite Gundam: the RX-79[G] Ez8. This one is on my wishlist without a doubt.
I agree! it is made by the same mecha designer of the ez8. Thanks for watching!
@ great to know!
Awesome! I subscribed.
Thank you so much! Did the same with yours. Your work is awesome!
I’ve wanted to get a hold of one of these for a while
If you’re in the US, some target branches sell them, and some local hobby shops have them in stock, but i bought this kit online directly from japan.
Really nice 👍
Thanks for watching!
this white devil is so badass.
done with those 6 ep too.
just got mine this morning, and finished it now.
surprisingly hv decent articulation for HG.
i am not gonna put the stickers.
still waiting for water slide to come next January tho.
but yeah,..this kit is HG but tastes like RG (almost).
planning to build the Akatsuki oowashi i assume?
I agree this is the best if not one of the best hg kits out there.
I would love to build the RG akatsuki, but as of the moment I’m planning to build at least half of my backlog and decided not to get any more kits until I am able to do so (running out of storage space). Thanks for watching!
nice!!! 👏👏👏
Thanks for watching!
Great job, bro :)))
Thank you! Cheers!
Omaygat yung wayt debbie 😮
thanks for watching! 😂
1:17
Just scored one of these at Target for $20
That is a steal! Unfortunately the targets near me doesn’t have these at the time. So I had to purchase it from japan.
damn cool
Thanks for watching! 👊
Suggestion: RX-78-2 Origin version.
Awesome suggestion! still need to get my hands on that. Thanks for watching!
☝️ I acknowledge you, my tribal chief!!! haha ☝️
😂😂😂
There is an installation error on the crotch
Now that you mentioned it I do have it backwards and the red piece should be on the opposite side as well. Thanks for noticing!
I am learning about video making. Could you help guide me on setting up lights, camera angles, and important tips for filming? Thank you very much.
Thanks for watching! I’m not a pro on this but I’d be happy to share what I know. Is there anything specific that you want to know? or is there a specific part of this video that you might have questions? My setup kind of varies depending on the situation. You can send me an email in the about section of my channel. Good luck!
@@Plamo_House thanks u. I have sent the email and hope to receive your reply soon.
is it just more efficient to pre-cut out all the pieces for each build section at once instead of as you go along?
Thanks for watching! That could be more efficient. I guess It is just easier for me (video editing-wise) to complete each build segment before moving onto the next.
This kit is almost like rg.
Design and articulation is definitely better than most older rg kits but surpringly a very simple build. Thanks for watching!
Hi, great video! just want to ask, do you not sand after cutting out the remaining nubs? and do you straight panel line them with gundam markers right after you cut them? just heard from others that it might crack without topcoating. thanks for answering 😊
Thanks for watching bro! I use a glass file for cleaning out most of the nubs after the 2nd cut and I use sanding sponges and a hobby knife for nubs that are on tight spaces as well as nubs that are on concave surfaces. For panel lining I’ve done more than 50 kits without applying a topcoat. Gundam markers should not be applied on ABS plastics but works fine with PS plastics. Most new kits use all PS, ABS plastics are usually used in older kits especially on the inner frames do take note to check the runner label for that. I’ve even used tamiya accent liner without a top coat which is more corrosive than gundam pour type marker but never had any issue at all. A general rule of thumb is to apply the panel liner before building the parts, I think this is the problem most of the time for people having cracks on their kits, it tends to seep through the seamlines and crevices which end up pooling inside the parts prolonging the drying time soaking the plastic longer and ultimately weakening it. Hope this helps!
@Plamo_House I see... thanks for your prompt reply. more power on your channel!
This HG has an inner frame?
Yes. It has a full inner frame except for the head part. Thanks for watching!
@Plamo_House Amazing. I will try to look for this kit too
i like video i have that one
Thank for watching! How was your build experience? I was surprised that it would be very simple but the end product gives a lot of articulation and a lot of intricate posing.
@@Plamo_House sorry for the late reply but yes build experience very fun and enjoy. Articulate is great but stickers are a bit hard to put on, sorry for bad engish
Hey your english is fine, no need to apologize for that. Yeah the stickers are a bit of a pain. I decided not to put the shield stickers, I plan on painting it sometime.
The sticker on the sight of the gun confuses me lol. Should it be an “x” or a “+” lol
I think it should be a “+” but I could be wrong. Thanks for watching!
Could you do vid on third party kits such as star gazer 1/99.9?
I’ll be sure to look into that on my next purchase. Thanks for watching!
@@Plamo_House Oh also it would be great of you if you review master grades or above
@@Plamo_House having short review on description is great as usual
I do have a stack of master grades in my backlog. Will start building those sometime. I’m trying to be consistent on my uploads while working my dayjob and I find it would be hard to do that If I start doing longer builds. But I will be building those at some point. Thanks for the suggestion!
bruhhh, my kit didnt include the F2 rubber part 😭😭
oh no sorry to hear that
When you're gonna build either HG Delta Kai or HG Rebawoo once HG Murasame Kai got built?
Or at least HG Shining Break?
Thanks for tuning in! Current work in progress is solari’s zaku next would be HG murasame kai. Unfortunately I don’t have the 3 kits you mentioned right now, But will keep an eye on those on my next purchase. 👍
Is it me or does the design of this gundam give any else terminator vibes?
I has that gritty look that fits the overall terminator design. I kind of get why you thought of it that way. Thanks for watching!
Hg but detel looks like rg
Very detailed! Surprisingly a very simple build as well. Thanks for watching!
HGUC1/144THEGUNDAMBASELIMITEDUNICORNGUNDAM
(LUMINOUSCRYSTALBOY)
HGGBB1/144GUNDAMLIVELANCEHEAVEN
HGUC1/144DELTAGUNDAM
HGAC1/144GUNDAMGEMINASS02
OKAY
Your fingers look yummy
I don’t know what to make of that comment 😂. but thanks for watching!
Are u da white devil?
da wayt dibil 😂