Yes. Pass it on to the apprentices. A little over-engineered, but teaches the basics. Learning WHEN this is the right joint, come later in the lessons.
@@FennixTempest no I can't and you can't either . listen you said what you said it was wrong ,your not a carpenter or in this case a woodworker please tell me before I prejudge you have you ever worked as a woodworker for more than a year .
@@franklinauguste415 Using your eyes to judge distance comes from all kinds of stuff but I have 4 years of woodworking from highschool and 2 out of it as a hobby, Ive done remodeling work in my own house and a couple friends. Wheres your experience to say so surely that Im wrong on my judgement?
@@FennixTempest my grandfather carpenter,father retired carpenter loc157 in ny,I'm a loc 157 carpenter since 2010.i been doing this all my life really .the prob I have is that everyone that is most critical of woodworking/carpentry vids always have the same amount of experience doing it as you .which is not much experience .so you can get mad at what I'm saying but in reality can you really if I'm right .and empty barrel makes the loudest noise .
Couldve hidden one of the dowels by drilling into the surfaces to be glued together. Another fun tip is to try and match the direction of the grain of the wood with the dowel. If your dowels arent the same species or color, perhaps consider using very dark dowels to make it more of an accent. Lastly, you can use a chisel or handplane to peel back a thin layer of wood where the dowels will be drilled before gluing the pieces together. This allows you to insert the dowels and glue the wood back down to hide the holes. You can see an example in this short: ua-cam.com/users/shortsxrPM4oCYv7I?si=DpZ-pWdetjKiFN7a
Dowels do add strength to a joint. However I will agree in this case simply because I don’t believe he drilled deep enough for them to really be effective. That’s my opinion.
@@bigjames1984 yeah thats about where I am with it, that particular joint has plenty of surface area for glue to adhere to so the dowels are not doing much for strength in this situation
After applying glue (Fevicol), let it moist each wood piece for 2-3 minutes. Then stick the pieces together. I see that you are immediately joining them. It will cause some glue to come out like a leakage.
what? no we wouldn't. power tools are made to make things easier, work smarter not harder. one more thing, it's *holes* not wholes. don't let me catch you on my jobsite talking stupid shit.
At this point, I'm convinced there's more joinery on UA-cam than in the real world.
I'm pretty sure the best instruction is on woodprix.
I learned how to crochet, sew and making burglars through UA-cam
its true bc ur likely not to use joinery in the real world
I wasn’t very good at woodwork at school, I just wish I was this good, these videos are fascinating
❤❤
❤❤❤❤❤😊
Only way to get better is to keep making sawdust. It’s a neat hobby that can become a part time hustle or even full time and make good money doing it.
Knock on it and say , that ain't going no where , adds at least %15 strength
😂😅
A man of culture 🙂
cryzerodrop😅..
😂😂
Nice joint. Had to watch it twice so I could pause it at the end. The finished product was displayed too fast.
Как по мне то гениально!!!👏👏👏
Неплохая идея!
I think you and i have way different definitions of what simple is my boy 😂
Quite a bit easier than mortise and tenon for a beginner. Half corner lap with dowel pins. Should have similar holding strength to a box joint.
@@bigjames1984agreed. I think this looks like a nice beginner joint and very strong
I guess I can build my own canvass for my future paintings
Exelente demostración 😊
Muito bom mesmo parabéns
Я почему-то подумал что засверлить под шконты нужно перед склейкой
If it's so strong, let's see a strength test.
Now that I know this, I just need to learn how to build a single family house!
🤣
Yes. Pass it on to the apprentices. A little over-engineered, but teaches the basics. Learning WHEN this is the right joint, come later in the lessons.
Wow i love how much you are teaching me❤
Yeah I could see that being strong!
Excelente trabajo 👍
متابع قناتك من مكة المكرمة
بلد الإسلام و المسلمين
رضينا بالله ربا و بالاسلام دينا و بمحمد نبيا ❤
Terrorist
We say Allah not god
اذا من هو الأله إن لم يكن الله
لا معبود بحق إلا الله
لا إله إلا الله و ان محمد و عيسى و موسى و ابراهيم و نوح و ادم عبيد الله و انبياءه و رسله
Hahaha😆
Super👌
Those dowels definitely dont reach the other piece enough to mean anything
Did you come to that conclusion from your imaginary tape measure
@@franklinauguste415 Can you not visually estimate the distance? Its not like its an optical illusion.
@@FennixTempest no I can't and you can't either . listen you said what you said it was wrong ,your not a carpenter or in this case a woodworker please tell me before I prejudge you have you ever worked as a woodworker for more than a year .
@@franklinauguste415 Using your eyes to judge distance comes from all kinds of stuff but I have 4 years of woodworking from highschool and 2 out of it as a hobby, Ive done remodeling work in my own house and a couple friends. Wheres your experience to say so surely that Im wrong on my judgement?
@@FennixTempest my grandfather carpenter,father retired carpenter loc157 in ny,I'm a loc 157 carpenter since 2010.i been doing this all my life really .the prob I have is that everyone that is most critical of woodworking/carpentry vids always have the same amount of experience doing it as you .which is not much experience .so you can get mad at what I'm saying but in reality can you really if I'm right .and empty barrel makes the loudest noise .
Шкант со временем вылезет , проверено на Советских окнах ))
wow that is great
Brilliant👍
Simple effective and to the point 👍
Caranya si biasa,,,,tp prosesnya unik❤❤❤❤
I like this better than a standard half lap. Looks so much easier to do.
Super ❤
Drilled real deep and only put the dowels in just over halfway. hardly past the join adding little or no strength at all.
Надо кресты обязательно нарисовать, иначе не то выпилишь!
Couldve hidden one of the dowels by drilling into the surfaces to be glued together. Another fun tip is to try and match the direction of the grain of the wood with the dowel. If your dowels arent the same species or color, perhaps consider using very dark dowels to make it more of an accent. Lastly, you can use a chisel or handplane to peel back a thin layer of wood where the dowels will be drilled before gluing the pieces together. This allows you to insert the dowels and glue the wood back down to hide the holes. You can see an example in this short: ua-cam.com/users/shortsxrPM4oCYv7I?si=DpZ-pWdetjKiFN7a
Buenísimo, gracias!
good ♥
❤
👌👌👌
Ahhh yes the Yin Yang method
Amazing
Wow
How many hpms are you hitting the dowels at. Seems critical to the rigidity of the joint. Capish?
🥒🥒🥒🥒🥒🍅🍅🍅🍅🍅🥬🥬🥬🥬🥬🫚🥜🫚🥜🌰🫛🫚🫛🥑🫚🫛🥑🫚🥑🫛🥑🍞🫚🍞🫚🍞🥒🍞🍅🍞🍅🍞🥜🍞🌰🍞🫚🍞🫛
Seen this too many times.....neeeeext
👏👏👏👏👏
yeahhhh
С моей колокольни глядя нет ничего лучше как зашиповать под ласточкин хвост
What a beautiful site. You rock it buddy. Awesome video.
แค่เลื่อยไม้ตามเส้นยังไม่ตรงเลย😂
good job.....👍👍👍⭐⭐⭐
❤me lag gya hai 🙏🙏🙏sis
Mantap banget bosku
100%!!!it's right because
quick&might...
Drilling and wooden bolt is too big for joint
What in the woodwork
😇
I like this ya got any other goodies like this ??
Thanks for sharing 👍
Sweet joint 🎉
Very cool
waooooo amazing
What's the name of this joint?
perfect 👍
Less sanding if you have used a light pencil✏️, instead of a marker / pen 🖊️ !
Peetty sure the sanding wasn't to remove those marks- they'll be painted over anyway
Good job, but still using saw
Lol
Хватит издеваться над дровами
🙏🙏🙏
गुड
Por que el taquete no puede ir mas profundo, por que cortarlo???
👍👍
তবে খিল টা পোড়া ঢুকানো উচিত ছিল আরও মজবুত হতো
❤❤
i like you
Nice
Indian ✋ hand😂😊
You're greatest
Yeah man
Good
vip nice bro
👏👏👏👏👏👍👍👍😅
dowels are purely decorative in this joint only real reason to use dowels is to align a joint.
Your comment is laughable. If you can't understand the strength that the dowels added your brain is not functioning well.
Dowels do add strength to a joint. However I will agree in this case simply because I don’t believe he drilled deep enough for them to really be effective. That’s my opinion.
@@bigjames1984 yeah thats about where I am with it, that particular joint has plenty of surface area for glue to adhere to so the dowels are not doing much for strength in this situation
Mantap kren
So what do I do?
Ben ça cassera a côté ! Voilà voila
After applying glue (Fevicol), let it moist each wood piece for 2-3 minutes. Then stick the pieces together. I see that you are immediately joining them. It will cause some glue to come out like a leakage.
Ini yg benar dan rapih.
💘👍👌👌👌👌
Ll
Bro started business instantly
Strong joint, it is not a simple butt joint.
直角だすのがうまい。
Keren, ❤❤
Sastisfayying amat 😂
Es msbers wue dio l9s ronos fel creus creito codo. Miete
Trabalho profissional
You have by of not
That's no good
Can I build a simple gazebo this way
No, but you can build a complicated gazebo this way.
For future projects , leave the surfaces rough when gluing because it holds better to a rough surface than smooth surface ..
累不累？？有病
Easy, but ugly
A real carpenter would also do the wholes with a manual drill
what? no we wouldn't. power tools are made to make things easier, work smarter not harder. one more thing, it's *holes* not wholes. don't let me catch you on my jobsite talking stupid shit.
👍
I wonder why they don't use nails instead 🤔
That's very bad idea 🖕