thank u im glad you think so .. im glad to just hear i could help u with a fix and task.. lately been seeing some haters out there but i wont let them bring me down they can all kiss my butt..and eat it..bite me ...id like ot see anyone do what im doing and say its easy, its takes alot of time and effort to do these videos and for every min u shoot u watch 5 mins of it, so u can edit check and confirm ..very time consuming but i do it for the love of spreading wisdom and knowledge
Life is full of people (haters) and Jealousy out their. You keep doing what you know best. Its about you and the knowledge you carried on. Don't pay attention on the Negative Comments down Below .Stay positive 👌🙌👍
thats what im talking about .. hence why i do these diys... cuz merc say u need to remove front bar and headlight to change bulbs but u dont .....so glad i could help
well done to everyone who does their own research and willing to get their hands a little dirty ... cuz in the long run u learn priceless knowledge and gain more experience in tour own servicing and being able to diy is priceless
For those like me who do not have the Spring Retaining Clips, exert a slight pressure and turn the unit approx 10-15 degrees to the LEFT, this releases the complete unit. Replacement is same, offer into headlamp at a 10-15 degree angle, twist to the right until it is locked .....
only if it doesn't work after changing the bulb ...it's either or ..sometimes both ..change the bulb and if it doesn't work it will be the ballast ...or it might just be the ballast FYI the ballast is alot more involve ..headlight needs to be removed to gain access
THX:) Very well explained and helpful hints as well as good camera job. Excellent:) I have still one question, what sort of lamp is the other we can see on the car, next to the BI-Xenon? How can I figure out which bulb I need for my w204? Halogen or Xenon and if it is DS1 or something else...? Thanks a lot:)
hey there.. thanks for stopping by and checking out the video... welcome to the channel ...hope u enjoyed the vid and my other content.... so i presume ur talking about the high beams? the hi beam is a h7 bulb .... usually you can find out what type of bulb your car has by simply googling your cars make and model and following with light bulb sizes and youll find a list....here is a site i found from googling it www.mercedesmedic.com/lights/ ..however it also depends whether you have HID headlights as they use a different type of bulb such as d1s d2s etc ... another way is by removing the bulb and seeing exactly what type of bulb it is .... hope this was helpful dear friend and feel free to check out my other videos... much love heres a better site which shows whether u need hid or not www.carbulbguide.com/mercedes-benz-bulb-guide.html just by googling mercedes benz w204 headlight bulbs sizes ....its amazing what u can find on google dear friend
definitely do not touch the bulb with your bare hands cuz the contaminants will degrade the bulb life...and try not to knock the bulb too much on any part of the car or headlight....
@@MIKEYZVLOGZ yeah dude! U rock! I have a 2011 GL 550 and ordered it with the xenon headlights and know a thing or two about lighting in general. I’m a lighting designer, self taught, I do events and own my own gear. My low beam went out and I started thinking.. our search lights are Xenon so I started looking on line and found u on YT. Saved me hella time and money plus u gave me the confidence to take care of business! Lol! I know that aren’t many female lighting engineers/VJ’s much less mechanics but we are out here and find it most enjoyable! Thanks once again from the US! Keep doing ur thing and I’m looking at ur other work as well! Excellent coverage! 🙏💖✌️
@@MCR1565 thank u so much for ur kind words.. and good on u for doing your thing... regardless of gender ..if u are good at what u do..more power to u.... stay strong soldier on.. respect ...✊
active headlamps usually mean intelligent lighting .. that's when your lights auto move wen u then tearing wheel and auto high beam on long roads and corners..usually that means the headlight motor might be no good or ballast ..u. an only know from getting scan
Brother my car right hand side also low beam light blub not on So do you think is light biub affect that message pop up or is motor affect light blub not on??
@@MIKEYZVLOGZ brother my car right hand side also low beam light blub not on So do you think is light biub affect the message pop up or is motor have problem affecting the light blub not on?
Hey man, i have a problem with my c350, the passenger headlight doesn’t work I swapped bulbs to see if i need a bulb but it still doesn’t work, what could it be ?
@MIKEYZ VLOGZ , thank you for your prompt response.. how do you remove the light cover? Through the well cover behind the light? There are no screws on the front of the lamp. Thank you for your help!
@@MrBobiov in that case u may need to find how it's mounted ..I'm sure if u search your car model and make year u will find a youtube video on how to diy that... ubfortunately I haven't don't that before so I am not sure how much more I can help u friend..hope u find what your looking for..always start with Google search ..and try find a forum or website that has done it to help guide u
@@MrBobiov ive never done this so tbh im not sure where , i would just start web browsing for it , playing with key words in your search and try find something , hoep u get what ur looking for mate..all the best, but if for some reason i stumble across it ill be sure to leave a msg for you here
@@goolinoli2120 all good...it's most likely the video about headlight disassembly or when I replace backing plate of headlight..scroll through the video I'm sure Ull get it
Hi my friend, I have problem with my 2012 w207. It's has a Xenon and as I know high beam and low beam are same Xenon bulb as on your video. So low beam operate but when I turn on High beam position left side operate but right high beam dont. please tell me does the right side xenon have a problem?
@Alex K bi xenon is only low beam with a ballast(box) only controls low beam ... and high beam is on its own because it's not xenon ... hope that makes sense e
Hello, good Video. I have a question, do you disconect the car batterie? I have to change the bulbs too, but i dont know what happened with the high Voltage of the xenon System. Thanks for answer 😊
ye if theres no clip it would just unplug ... it's not really a clip ...the plug connector just unplugs... my bad for not being specific...do u mean the pins that hold the bulbs in place
@@cheesesyrkyer5290 hey buddy I did it all without removing the battery ... however if your just gonna go for gold and not wanna worry about touching cable together then ye maybe .... but if ur careful like I was making sure not to touch any cables together ur fine .... as u saw in this video .... but if u want to be completely safe then ok DC the batt
@@MIKEYZVLOGZ mate you're so quick why don't we start a whatsApp group I appreciate you're effortless upgrade and saved 1000 bucks. I love to do my car stuff but scared since doesn't have enough tools and I also have one issue can you tell me how to fix bumper gap on headlight?
@@prems1545 I prefer to chat here so other ppl can see the conversation ...that way if they are having the same problem it can help them.. I dont do private sessions helping ppl... tbh..I already have so much work to do that I'm really busy these days trying to expand in all aspects of life work yt and etc... but I'm happy to give some advice where I can ... pls understand I'm not a professional I'm a simple diyer... I learn like everyone else through research yt and videos.. I then find my own way of doing it and explaining it in layman's terms so ppl can understand who don't have mechanical background and aren't good with tools ...
have u tested the bulb byitself? check to see if it works on another source orjust hook it up to a 12v source and wire pos and neg rto see if the bulb turns on... so u can eliminate the bulb failure.. if thats ok then check wires ..check fuses ..run diagnosis obd2 ecu check for errors..narow down issue
@@MIKEYZVLOGZthank you very much , I tried a new bulb but it didn’t light up , I thought it might have a board or an adapter system needs to replace by a new one .
@@TrendingN94 if u look at my lens removal and headlight disassembly videos I show where ballast is ..easy replace but u need to remove the headlight to access it
@@alaiia2100 are u trying to replace the bulbs or the entire headlight ? the low beam is removed via the 2 clips ..some don't have clips depends on the model ... to install a new bulb you just insert the bulb in ensuring u line it up correctly... do I have hids? or halogen bulbs ?
Brother. I have not tried cos I I could not work out how to release the spring holding the mount. Will try it first thing in the morning ans see if I can save the ZAR 13000.00 merc was quoting per headline . I'll tell you Utube funds had save so much money. I have already enrolled for a diploma in minor car repairs. Thank you.
u must have halogen bulbs then..ur wires will only look like mine i'd u have the d1s bi xenon headlights with hid for low beam and halogen for high beam ..do your high beams look the same ?
This bloke needs an oscar nomination.
lol cheers mate ...
Dealer is upping service costs. Quoted me $500 plus tax. Bypassed Benz all together and spent less than $120. Shout out for clear directions. Thanks!
I must admit that is some great camera angle and views, really appreciate your time. Peace
thanks mate I really was trying my best
@@MIKEYZVLOGZ one last question, once you installed new parking lights did the dash reminder go away
@@johnjkizer6399 yes it did 100%
Mikeyz - thank you for yours explanations! I change both bulbs in 5 minutes
well done
I could not have done it without your help , very informative very detail instructions ,great job .Keep them good videos going.
thank u im glad you think so .. im glad to just hear i could help u with a fix and task.. lately been seeing some haters out there but i wont let them bring me down
they can all kiss my butt..and eat it..bite me ...id like ot see anyone do what im doing and say its easy, its takes alot of time and effort to do these videos and for every min u shoot u watch 5 mins of it, so u can edit check and confirm ..very time consuming but i do it for the love of spreading wisdom and knowledge
Life is full of people (haters) and Jealousy out their. You keep doing what you know best. Its about you and the knowledge you carried on. Don't pay attention on the Negative Comments down Below .Stay positive 👌🙌👍
@@emanuelmendez7996 well said
Do you have a video on (Tire Press. Monitor Inoperative) ,showing on my dashboard on a 2008 mercedes c300???
@@emanuelmendez7996 no i dont,,but usually its a sensor or low air ... check with a scan tool it will tell u what it is buddy
Great video...thanks heaps as was struggling before I found this video
glad bro
Tks. Your instructions are very clear. My W204 uses the same clips.
glad to be of service mate
Dude you saved me $130, they wanted to charge me 1 hr of labour for one bulb. Thank you.
thats what im talking about .. hence why i do these diys... cuz merc say u need to remove front bar and headlight to change bulbs but u dont .....so glad i could help
Crazy, the stealership in my city wanted 197.99 for the 2 bulbs and I definitely wasn’t gonna have then put it on cuz I would’ve been broke
well done to everyone who does their own research and willing to get their hands a little dirty ... cuz in the long run u learn priceless knowledge and gain more experience in tour own servicing and being able to diy is priceless
THANK YOU THANK YOU THANK YOU GREAT LIGHTING AND GREAT EXPLANATION BEST VIDEO
@@nickvosnakis1345 thanks buddy
Best video on changing bulbs
The best video in this subject. Thanks!
thanks I appreciate u
For those like me who do not have the Spring Retaining Clips, exert a slight pressure and turn the unit approx 10-15 degrees to the LEFT, this releases the complete unit. Replacement is same, offer into headlamp at a 10-15 degree angle, twist to the right until it is locked .....
Thanks Mikeyz
Thank you so much from Türkiye 🇹🇷😁
ur welcome
Do I have to change the ballast too or can I replace the bulb only.
only if it doesn't work after changing the bulb ...it's either or ..sometimes both ..change the bulb and if it doesn't work it will be the ballast ...or it might just be the ballast FYI the ballast is alot more involve ..headlight needs to be removed to gain access
A very useful video. 👍
Hi, do you have any idea how to fix w204 facelift led tail light not light up or flickering? Thank you!
ye u need a decoder or error cancellor
THX:) Very well explained and helpful hints as well as good camera job. Excellent:)
I have still one question, what sort of lamp is the other we can see on the car, next to the BI-Xenon?
How can I figure out which bulb I need for my w204? Halogen or Xenon and if it is DS1 or something else...?
Thanks a lot:)
hey there.. thanks for stopping by and checking out the video... welcome to the channel ...hope u enjoyed the vid and my other content.... so i presume ur talking about the high beams? the hi beam is a h7 bulb .... usually you can find out what type of bulb your car has by simply googling your cars make and model and following with light bulb sizes and youll find a list....here is a site i found from googling it www.mercedesmedic.com/lights/ ..however it also depends whether you have HID headlights as they use a different type of bulb such as d1s d2s etc ... another way is by removing the bulb and seeing exactly what type of bulb it is .... hope this was helpful dear friend and feel free to check out my other videos... much love
heres a better site which shows whether u need hid or not
www.carbulbguide.com/mercedes-benz-bulb-guide.html just by googling mercedes benz w204 headlight bulbs sizes ....its amazing what u can find on google dear friend
Does the light come off the sqare
@@Kristopherthebengal sqare? or square? u mean led light? where does it shine off?
good video ...clear and to the point...when you say dont touch anything else...what did you mean?
definitely do not touch the bulb with your bare hands cuz the contaminants will degrade the bulb life...and try not to knock the bulb too much on any part of the car or headlight....
@@MIKEYZVLOGZ ahh i see thank foe getting back to me
Very helpful! Many thanks! 💖
most welcome..glad it was helpful..
@@MIKEYZVLOGZ yeah dude! U rock! I have a 2011 GL 550 and ordered it with the xenon headlights and know a thing or two about lighting in general. I’m a lighting designer, self taught, I do events and own my own gear. My low beam went out and I started thinking.. our search lights are Xenon so I started looking on line and found u on YT. Saved me hella time and money plus u gave me the confidence to take care of business! Lol! I know that aren’t many female lighting engineers/VJ’s much less mechanics but we are out here and find it most enjoyable! Thanks once again from the US! Keep doing ur thing and I’m looking at ur other work as well! Excellent coverage! 🙏💖✌️
@@MCR1565 thank u so much for ur kind words.. and good on u for doing your thing... regardless of gender ..if u are good at what u do..more power to u.... stay strong soldier on.. respect ...✊
@@MIKEYZVLOGZ likewise my friend! 🔥
Hay brother I want to ask you I have 14 Mercedes C350 last night pop up Active Headlamps inoperative message so do you know what's wrong?? Thank you
active headlamps usually mean intelligent lighting .. that's when your lights auto move wen u then tearing wheel and auto high beam on long roads and corners..usually that means the headlight motor might be no good or ballast ..u. an only know from getting scan
Brother my car right hand side also low beam light blub not on So do you think is light biub affect that message pop up or is motor affect light blub not on??
@@MIKEYZVLOGZ brother my car right hand side also low beam light blub not on So do you think is light biub affect the message pop up or is motor have problem affecting the light blub not on?
@eddielam389 yes ..so it's most likely your ballast because ur lights not working can throw that messages
@@MIKEYZVLOGZ thank you brother
Very helpful 💯🔥👍
Great video...Holla from brissy
thx champ
Hey man, i have a problem with my c350, the passenger headlight doesn’t work I swapped bulbs to see if i need a bulb but it still doesn’t work, what could it be ?
most likely the ballast ? do u have hid or normal halogen?
check fuses
Do you have a video replacing the DRL lights on a 2014 Mercedes ML350 BlueTec?
no unfortunately not .. however the one on the ML are similar .. u would have screws holding it in ..most likely behind a cover
@MIKEYZ VLOGZ , thank you for your prompt response.. how do you remove the light cover? Through the well cover behind the light? There are no screws on the front of the lamp. Thank you for your help!
@@MrBobiov in that case u may need to find how it's mounted ..I'm sure if u search your car model and make year u will find a youtube video on how to diy that... ubfortunately I haven't don't that before so I am not sure how much more I can help u friend..hope u find what your looking for..always start with Google search ..and try find a forum or website that has done it to help guide u
@MIKEYZ VLOGZ thank you again and appreciate your help. I’m asking because I can’t find a video. I’ll let you know what I find. Thanks again.
@@MrBobiov ive never done this so tbh im not sure where , i would just start web browsing for it , playing with key words in your search and try find something , hoep u get what ur looking for mate..all the best, but if for some reason i stumble across it ill be sure to leave a msg for you here
Is it possible to replace the bi xenon headlamp with the downgraded halogen ones?
do u mean the entire headlight or just the bulbs
@@MIKEYZVLOGZthe entire headlamp because I’m having trouble finding the headlamps for my bi xenon headlights
Great Video Mikeys thanks a lot
ur most welcome tan hope u were able to do the same ... its crazy how ppl think u have to remove more just to remove the bulbs
Hi i have same car bi xenon but my lvl or hedlight is dow, how cane adjuste lvl plz help me.
u adjust via the hex holes on top of headlight from in the bonnet
@@MIKEYZVLOGZ bro cane you help me with picture or short vidio plz.
@@goolinoli2120 watch one of my videos about headlights and I show where the adjusters are
@@MIKEYZVLOGZ ty bro
@@goolinoli2120 all good...it's most likely the video about headlight disassembly or when I replace backing plate of headlight..scroll through the video I'm sure Ull get it
Hi my friend, I have problem with my 2012 w207. It's has a Xenon and as I know high beam and low beam are same Xenon bulb as on your video. So low beam operate but when I turn on High beam position left side operate but right high beam dont. please tell me does the right side xenon have a problem?
if it doesn't turn on then yes u most likely have an issue
@@MIKEYZVLOGZ So as understood Xenon has a bulb with a block they are together and this block controls the high and low beams
@Alex K bi xenon is only low beam with a ballast(box) only controls low beam ... and high beam is on its own because it's not xenon ... hope that makes sense e
@@MIKEYZVLOGZ So, if a low beam operates but a high is not, may I swab the ballast?
@@MIKEYZVLOGZ does the ballasts control the low and high beams?
Hello, good Video.
I have a question, do you disconect the car batterie?
I have to change the bulbs too, but i dont know what happened with the high Voltage of the xenon System.
Thanks for answer 😊
some sah u do nut i didr do that and it was fine
@@MIKEYZVLOGZ
Ok, thank you.
With the high Voltage im a little bit scared, but when you say its Not a problem then i feel better😁
@@martinpaintner810 to be safe disconnecr pos terminal wait 25 min for all power to discharge
my W204 AMG C63 doesn't have the two clips for removal ....
ye if theres no clip it would just unplug ... it's not really a clip ...the plug connector just unplugs... my bad for not being specific...do u mean the pins that hold the bulbs in place
MIKEYZ VLOGZ ya there is no twin lips you release to remove the bulb
It feels quite secure, so I don’t know where to release the bulb
if u can take a pic and send it to my email huottea@gmail.com I can try figure ut out for u friend
@@911Molar maybe it pulls right out ... I cant be sure as I cant see what u mean.. however it cant be too different dear friend
What bulbs are u using for c63 ? Did you get a fault code when installing new one? Is 6000k better than 8000k
Thanks
Great video!!!
thanks mate
very helpfull video thanks bro
Im so glad
Thanks a lot. 😘
ur welcome friend
Should I disconnect the battery?
honestly u dont have to i didnt in my clip but if i are really worried then u can
Yes! I shorted my headlight control computers
@@cheesesyrkyer5290 hey buddy I did it all without removing the battery ... however if your just gonna go for gold and not wanna worry about touching cable together then ye maybe .... but if ur careful like I was making sure not to touch any cables together ur fine .... as u saw in this video .... but if u want to be completely safe then ok DC the batt
Awesome bro you da man
cheers
The pins are different on the Preface lift model, do you have suggestions?
What model do u have
@@MIKEYZVLOGZ W204 pre face lift
@@prems1545 yes thats my model
@@MIKEYZVLOGZ mate you're so quick why don't we start a whatsApp group I appreciate you're effortless upgrade and saved 1000 bucks. I love to do my car stuff but scared since doesn't have enough tools and I also have one issue can you tell me how to fix bumper gap on headlight?
@@prems1545 I prefer to chat here so other ppl can see the conversation ...that way if they are having the same problem it can help them.. I dont do private sessions helping ppl... tbh..I already have so much work to do that I'm really busy these days trying to expand in all aspects of life work yt and etc... but I'm happy to give some advice where I can ... pls understand I'm not a professional I'm a simple diyer... I learn like everyone else through research yt and videos.. I then find my own way of doing it and explaining it in layman's terms so ppl can understand who don't have mechanical background and aren't good with tools ...
Excellent. Do you have instructions on retrofitting the LED « fogs » as DRL’s on this per-facelift?
the les strips inplace of fog lights ? mine came factory but it pretty easy once u remove the front bar
My bulb is good but it doesn’t light on , its shows low right beam in instrument screen, please help
have u tested the bulb byitself? check to see if it works on another source orjust hook it up to a 12v source and wire pos and neg rto see if the bulb turns on... so u can eliminate the bulb failure.. if thats ok then check wires ..check fuses ..run diagnosis obd2 ecu check for errors..narow down issue
@@MIKEYZVLOGZthank you very much , I tried a new bulb but it didn’t light up , I thought it might have a board or an adapter system needs to replace by a new one .
@@TrendingN94 donu have d1s hid? or halogen?..cuz if it's hid like mine it can be your ballast
@@MIKEYZVLOGZ my bulb is d1s .. so is there anyway to fix the ballast? Do you have a video about it?
@@TrendingN94 if u look at my lens removal and headlight disassembly videos I show where ballast is ..easy replace but u need to remove the headlight to access it
how do u actually take the light off
which light
@@MIKEYZVLOGZ the low beam i took it out the actual head light but i can’t seem to put a new light bulb in am i supposed to replace the whole box?
@@alaiia2100 are u trying to replace the bulbs or the entire headlight ? the low beam is removed via the 2 clips ..some don't have clips depends on the model ... to install a new bulb you just insert the bulb in ensuring u line it up correctly... do I have hids? or halogen bulbs ?
@@MIKEYZVLOGZ how do you take off the actual light bulb
@@kxrtierk1284 do u have halogen or hid? when u say the actual light bulb do u mean what i did or something else
Brother. I have not tried cos I I could not work out how to release the spring holding the mount. Will try it first thing in the morning ans see if I can save the ZAR 13000.00 merc was quoting per headline .
I'll tell you Utube funds had save so much money. I have already enrolled for a diploma in minor car repairs. Thank you.
its pretty simple as u can see in the clip ..but i hope it all works out for u
@@MIKEYZVLOGZ I did work to the script. Thank you so very much.
good on ya mate ur most welcome friend
@@MIKEYZVLOGZ 😎
Thanks you said it
My wires dont look like that...
u must have halogen bulbs then..ur wires will only look like mine i'd u have the d1s bi xenon headlights with hid for low beam and halogen for high beam ..do your high beams look the same ?
My car doesn't have that clips
most likely just push in then
what does it have may I ask
@@MIKEYZVLOGZ neither does mine. Doesn’t have anything really & pushing it doesn’t work
@@ashleytrujillo1623 that strange to me cuz how is the bulbs secured