Meguiar's NEW Ultimate All Wheel Cleaner - Amazing On Car Paint!
Вставка
- Опубліковано 29 вер 2024
- SCOTT WITH DALLAS PAINT CORRECTION & AUTO DETAILING IN PLANO TEXAS SHOWS THE POWER OF MEGUIARS ULTIMATE ALL WHEEL CLEANER WHEN USED ON CAR PAINT AND WHY IT'S A GREAT OPTION TO REMOVE IRON FROM THE PAINT
Products Used:
Meguiar's G180132SP 32 oz. Ultimate All Wheel Cleaner - amzn.to/2Q3BH57
HIGH QUALITY MICROFIBER TOWELS FOR AUTO DETAILING
luxurymicrofib...
tip for using this on paint, put the liquid into another spray bottle with a bigger spray saves so much product.
I absolutely agree, and I'm surprised that Scott did not mention that because this is a gel you will use a lot more of this product to cover the same surface area as you would with a thinner product that would be applied as a mist
Would you recommend this or the mirror bright? Which works better as a iorn remover do u think? Thanks
What do you recommend for cleaning painted clear coat factory wheels? Chevy Impala ltz 2016
This would work great for that. You can also use Wheel & Tire Cleaner in the purple bottle.
So you spray this stuff on first before pre-rinse and wash?
Scott where do you buy it for $8.00 the cheapest that i could find was $19.99 on amazon
you can find it on autogeek with free shipping no tax!
Vu Vuong aaaannnnd with a 20% promo discount 👍🏻
$12.99 at Autozone
I want to use this on my vehicle but there is plastic panels below my doors and on my rear defuser (15 mustang gt pp) Would painters tape masking those areas off be safe if I use this product?
Tre Valentine i have the same question... i have the mustang gt 16
as long as you rinse off with your pressure washer within 20 30 minutes or less thats fine. you just dont want to allow it to rest on that area overnight or a very long time. its not going to damage plastic by sitting on area just for a few minutes. Think of the 5 second rule, all is good lol jk.
is this identical to the mirror bright version?
Completely different chemistry from the ground up. This is a superior formula for sure.
Hi Scott , question which I can’t seem to find answer for... do you wash the vehicle and dry than apply this? Or before washing? Car should be dry or wet?
Apply it to a dry car that way you dont dilute the product, rinse car then wash car as you normally would.
@@carlosmartinezz3022 so apply it before touching the car at all or even after washing it and drying it?
Sooooo is this better then super clean?????
SoCal Uberdude super clean was never designed to dissolve iron from paint!!
Soooo I'm not sure what your point is:)
Dallas Paint Correction & Auto Detailing oh, I don’t know what’s the difference I thought it was the same as traffic grime.
$8.99 on Autogeek
R just hit up your local walmart
Honestly Scott's videos are the most informative vids. The best on UA-cam honestly
David Saucedo 25k subbies can't be wrong 😉
Foreal.. he does have a big following and this is why
Scott Bly, saving detailers dollars one video at a time
much love Victor and thank you for your support:)
Dallas Paint Correction & Auto Detailing And thank you for your time and great tips! Thanks for the love, right back at ya!
Read the label not all are safe
@No Name wheel brightener does not remove ferrous fallout
No more iron x
Iron X is just so darn expensive!
Bilt Hambers auto wheels is so much better its just funny.
hi scott , can I use this product to remove hard water spots on the hood of the car
I’m wondering that as well, have you found any evidences?
@@chasew.l.5808 I've heard Wilson say Meg's Wheel Brightner for water spots. This is safe on the paint, so I don't see why it won't work. Just not an acid like WB, so might not be as good.
For the new and older subscribers before buying anything wait a few days to a week because I bet he will find something better and cheaper lol. I figured that out after watching a few of the videos. I have saved a lot of money so that's the best part lol
I did the mistake of spraying Meguiar's all wheel cleaner when the paint wasn't cool and I got water marks..I went on to use griots correcting cream and finishing sealant..They went away initially but when I exposed it to the sun they came back..Any advise
You talk too much. Could have delivered your message in 1/3 the time.
I use the 1.25x speed all the time
I wonder if it removes hard water spots.
Website no longer works.
Is is recommended to dilute Meg All Wheel Cleaner before spraying it on your paint since it is so thick? This way you can stretch your dollar even more.
Well I tell ya what: I watched this vid and took the advice and am here to report this material did NOT even phase waterspots. I didn't work. That's hands-on testing and prompt feedback for you all to be made aware of.
Your a big help with product reviews. Thank you so much. Please keep it going
THanks for the video! how long do you think we should leave the stuff on the paint before washing it off? I find if i leave it more then 3 mins on my toyota rims it stains it
Any response?
Keep it for your Facebook audience. Company’s are discovering your following power , thus raising the price on anything you recommend.
Hi scott , When using the iron x or this meguiars product to you use it on entire car and do you rinse off before washing car.
We just got this product at our store and I can't wait to try it!! good video btw.
Thank you! Your amazing and your long vids are welcome!!! Keep talking bruh!!!
This is awesome Scott. I watched your previous megs video and was already looking to purchase that one. But will give this one a try instead since it may be cheaper and easier to find. One thing I noticed you didn’t mention is plastic trim. In the previous video you mentioned to be careful about spraying it and avoiding plastic trim. Should we use the same precautions with this product as well?
This plus clay bar is the only thing that worked for overspray on my car
you didnt say you have 2 use it on dry paint
Does it get water spots off?
Thanks Scott, was just about to order some Iron x to decon my ride. $$$ saved!
Has anyone used this to remove water spots on the paint?
This stuff costs more than Iron X in the UK.
Damn youuuuuu!!! All the inexpensive products you feature are always sold out or unavailable. Lol
You can find it at Literally any auto parts store, Walmart,heb
Five bucks on clearance at walmart
Stuff works awesome on chrome and very very rusty metals
Is this product the same as Meguiar's Wheel & Paint Iron Decon
no
Man this guy rocks...so i was going to buy the IronX until i came across your video a while back. i finally purchased a bottle and I used it yesterday and let me tell you IT WORKS. 10 bucks at Walmart and it did its job. purple purple, it took off 97% of contaminants which i completed with clay bar but it did its job. thanks boss man.
Also I'm confused lol I called meguiars and they said that is what this product is designed for. Then 2 days later I called back and they told me WHEELS only lol
They probably said use it at 55°+ too.
the bottle says it is safe for painted brake component plus it is ph neutral your paint will be fine/
The same goes for other brands like Bilt Hamber. Their wheel cleaner (Auto-wheel) is the same as their iron remover (Korrosol) except is formulated to stick a bit longer. Bilt Hamber has the best iron remover in the world. You probably won't get that from Europe?
thank you for sharing!! was looking for an iron remover, now willl use this for pre paint correction in the future
awesome you just saved me some money. thanks for your videos this is my favorite UA-cam channel.
i think you're awesome as well Eric:)...thank you for the kind words
Thanks scott for another awesome video. I have a question. Thankyou in advance for taking the time reading this and i'll appreciate you more for any response. In another video you recommended purple power as a soap to remove wax, sealants and traffic film. My question to you is because this product is ph neutral would you recommend using it to remove traffic film, industrial fallout and other bonded contaminants in between wax applications rather than purple power every wash which strips waxes and sealant every wash? Again if you read all the way through this thankyou and looking forward to your response
Nice video again sir...congrats... I am huge fan of the channel!!!! As i watching a.past video with the....bed seats and.paint correction wich you axplained the order.of your enterior detai steps!!!!! .. I was thinking some.times to show as, how your mind visualizes the car and cutting every section in 2 by 2 aerias to make correction. As.example the hood 2 orizontial and 4 2-2 sections??..the roof maybe.8 sections the fender...i dont.know how your mind thinking and divining a fender in 2-2 aerias...it will be nice ti show ad.you you mind works for the.best result divining the car.into section for.correction.......thanks Scott for your passion...kind regards from.Athena Greece
Wash and let dry the vehicle first?
Better than those acid based cleaners
Just sprayed down my lower passenger door and fender and WOW! Lots and lots of metal on the paint....Now i need to let it break down smaller and clay the whole car! Thanks Scott!!
Thank you for this amazing video. What do you use for wheel cleaner?
Scott, you've got several fans, including myself, on Autogeek and I passed the info along about Megs MB wheel cleaner and it was mentioned as being too weak, I don't agree with that completely.
I will use it come spring when I do ALL the prep work prior to applying a new coating to my car from TAC systems. I will let it dwell and then foam the car down to rinse it away AND to wash the car afterwards.
Tried it this weekend and works just described for nearly half the price! Only if they sold it in bulk would Meguiars have a true winner in my books.
Thanks for the good info. Tell me, where can you get this for $8.99? Amazon wants $19.44 a bottle. Tom
Tom Walmart 10 bucks
For follow up reasons, has there been any paint damage at all? I got some and it works great on wheels
This is safe for paint if rinsed off appropriately. Consider that this is "ALL WHEEL" and most wheels are painted wheels.
In your video regarding Meguiars Mirror Bright and using it on paint, you said that you need to be careful with Mirror Bright on plastic trim Is that the same with this product?
yes...ALL iron removers in my opinion including iron x shouldn't be used on plastic trim
Thanks for that response. I've been reading all these comments looking for your answer about plastic trim. I'm excited to give this a try on a white car with black trim.
Scott love your videos! Unbiased opinions and great tips!
Scott please don't tell me Meguiar's is sending you products to review don't let us down
JASON JIMENEZ most likely. Pay attention to what he says at 0:58
1221Ralph yes I heard that and made me comment
I wouldn't be surprised, but he didn't even use it for its advertised purpose and he said it doesn't work well as a wheel cleaner. He may have gotten a free case and just decided to review it, but I don't think the review is tainted.
I do think the review is genuine but I hope that whatever happened he stays genuine. He has gotten the attention of a lot of way bigger UA-cam channels and product manufacturers including optimum.
yes the product was given to me but it wasn't meguiars..meguiars I'm sure would want me to discuss the product as a WHEEL cleaner and not as a iron remover for paint..i will never ask for payment from any company for my transparent reviews:)..its also worth noting that i beat up meguiars in some of my other videos, so i don't think I'm the best spokesman for them..lol
Thanks for saving me money. You're the man Scott.
Any experience using this on motorcycle wheels with cadmium coated spokes (chrome hoops)? I asked Meguiars and they say they don't know. I know its not a wheel video but if anyone would know it seems like it'd be you. Thanks
Scott, I have a black Lexus LS with water spots on the roof. I have seen a few videos that show using a 1:5 dilution of Meguires Hot Wheel Cleaner and water sprayed on a cloth to wipe off water spots. It looks similar to this video on the white car. Is it true that I can try removing water spots with wheel cleaner diluted? If so, do I need to do more than wipe it off to make sure it does not damage the paint?
Great video! I'm a bit curious what product you use for your wheels
meguiars wheel brightener is my pick on wheels
Dallas Paint Correction & Auto Detailing Okay, I'll make sure to check that out! I've been hearing good things about it
What if this doesnt work? How can I get rid of the spots that are still on the paint?
Hey Scott I just used this and my white truck bleed purple, I let set for 5 minutes then power wash some spots still visible, do again? or clay bar? what can I do? want it all gone! ! previous owner drove with bad caliper
“I didn’t buy it, I came to it another way”... thee old’e 5 fingers discount?😂
Another great video Scott!!! 👍🏼 👍🏼
Dear Scott i have info for your..as i am one if them....European fans... Valet pro dragins breath product is the same as megs. It is like jel and have this..red liquid effect to the iron contaminations and the cost it is aprox to 15euro for 1lt-33oz.....also the korosoll of britemax but not jel......
Why not just say iron instead of ferrous metals? Is there a difference in meaning?
Is it normal for it to leave yellow spots on my rear discs? I drove a good 10km with some hardish stopping and theres a pretty loud noise when I come to a full stop and not all of it has rubbed off.
Thanks Scott. And a happy 2018 to you.. unfortunately for me, maguiars ultimate wheel cleaner has not made its way to florida and i have a black vehicle. Would you say that a 5 min contact time would be enough on the paint with this product? Or should i just stick with claying since i have a black vehicle?
Dang wish I bought this before I bought the Chemical Guy's Version but at least now I can save $$$ again lol
Would Sonax wheel cleaner plus work the same? Because the 5 liter cost $80 at Amazon and would end up being cheaper than this.
Since you state that these chemicals are not safe for plastics/trim, how would you protect the plastic trim like on this vehicle in the video ?
put a wheel cleaner on the body ?
Can i use this product which is PH balanced to remove water spots without damaging the paint? Anybody who did it?
Used this on my paint and removed all the iron for $8
Question do YOU Scott bley only use iron removers on bottom of quarter panels or all over
How you doing? What do you use for a wheel cleaner? And where can I buy it? Thanks you
How about Black Magic All wheel cLeaner.? Will it do the same.? Much cheaper..
Scott have u tried wheel brightener as a iron x etc. Alternative? I've heard other pro detailers do it. I haven't tried myself but have u experimented? If so does it react? I have however used it countless times on the paint for instant water spot removal
Already ordered a 22oz bottle of Mirror bright wheel cleaner from Autopia with free shipping
Adam’s wheel cleaner also works great on paint. It’s a gel like substance as this product is. Except Adam’s is 14.99 and then you have to pay shipping. Think I’ll try the Megs out after my wheel cleaner bottle is empty. Thanks Scott.
How do we know that it is safe on the paint long term
well you would use this more often on your wheels, perhaps twice a month, yet its safe for ALL clear coated wheels:)...you would only be doing this a few times a year if that on the paint..the same clear coat on the wheels is the same on the car
you said iron remover is safe to use once a month? @@dallaspaintcorrectionautod8343
it is also used on paint and clear coat? a bit like iron x, tar x etc. ..? removes iron as well as tar as carpro trix?
Can you remove the iron particles on black paint. I never see anyone talk about it
I really like how it sticks nicely with the foam. Thats why i like the nanoskin iron remover. Have you tried the meguiars iron remover?
Does the ultimate all wheel cleaner work for water spots on the Windows ?
Hi Scott great channel, very informative. How many times can you apply this stuff. I recently bought a white car and was horrified to find these light brown spots but after a little research I learned it wasn't such a big deal. I applied it 3 times waiting 3.5 to 4 minutes each time but it didn't remove all of the spots. Wondering if claying would do it.
You still stand by this stuff, or should I get something different?
loved it. thanks for all the tips and tricks. saving the common man dollars not cents
Will this also take hard water spots off?
I like that shit man. Never used it on paint BUT I will.
Thank you 🙏 I was about to order iron x but was thinking on the price , that it was too much. Then I came across your video just minutes before ordering iron x . And with that money I can buy plenty of the Me... ultimate cleaner
Thanks was looking too see what’s New for cleaning wheels n your video on it is gonna work perfect on my old F 250 Black 4 door to clean her paint so she’ll shine even better. Peace Out ✌🏻
what’s your opinion on Adams h20 guard and gloss ?
Gee. You saved me a ton of time and money. I thought I had to have Iron X. Thumbed and subbed
Mcguiars always come out with top products tbh
Those two CarPro and Optimum marketing directors are back again...thumbing down your videos.
lol..i do like some carpro products and optimum but I'm always thinking outside the box because as a pro even though i can afford their products, i still need to find better solutions without compromising quality of the job and keep more money in my pocket:)..much love Jonnie:)..you still enjoying your warm weather??
My fav product that they have is the hyper dressing
Already ahead of me scott. I was just about to say try the new ultimate all wheel cleaner.
Walmart has it right now on rollback for $8
So it will work on my 2007 compass jeep