It can be tricky. If the blank key will still turn the car on to KOEO you should be able to delete all keys and program the new ones. If not, You are looking at a dealer fix.
Hi. I was wondering if you know the process of the key code erasure on a Highlander? Will I it delete all registered smart keys and will I be able to register the smart keys that I do have? That way I can eliminate the keys that were lost in the past.
Yes. You can clear all existing remotes and keys if you want to. Then you can program a fresh set. It's in the same listing I show here. It's the ad new keys or remove all option.
To be honest, other than the larger screen and a few tweeks to the OS, they are much the same. Of course the biggest difference is that the Pro3+ is wireless where the Elite must be plugged in to the OBD2 port. Both are really impressive with the coverage and value for their money. I've owned a lot of Snap-on, OTC, and Matco products and this one for the price crushes all of them.
Hi. Can this device also add functionality on a newer Toyota or Lexus, say using the remote to lower and close the windows but hitting the remote button?
It does have the ability to turn on functions. On my Mirage I added fog lights and used it to activate that feature in the ETACS System. Not sure about that particular item on the Toyota, but it certainly does have those features.
That my friend is the problem. There is no "best for everything". Each tool I own is really good at a lot of stuff, but is missing something. The good news is that these days most are "Good enough". I own a 16K Snap-on Zeus. It's garbage. I prefer this tool 10 to 1 over it.
I have a key fob to program for a Nissan rogue but I can’t find the process to register the a new key. It’s not as easy as the Toyota. I have the same launch scan tool
@@FarpointRestorationsAndRepairs thank you. I have reached out to kingbolen. It's nice to know who to contact if I got general questions or issues with my laumch tool.
I think that would depend on the car, but it's a much more complicated thing. You'll need the pin from the manufacture for that specific vehicle. To get the pin, you'd have to verify ownership.
I have 2007 kia amanti i bought a new ignition lock cylinder off eBay it came with new keys to it I installed it in the car when i turn the key to start car dont start but all the lights come on do i need this device you have to program it or can i program the car without it i still have my original key but long story short it got stuck in the ignition 😂
I will have to double check. Some makes and models have the option to delete all existing keys from memory and allow you to start with a fresh key. I'd check in the programming section to see if your car offers that option. The bigger issue is how do you power up the car to gain access to the computers with no key?
Well, I bought an OEM key from O'Reilly's. I used the autel km100 and was able to use that to program the new one without the original. The new key didn't power the truck on fully before programming but would turn the truck electrical on, such as radio and dash info allowing me to program the key with that device.
I just bought mine off Amazon x431 pro3s+ how difficult is it to get the updates after the 2yr due to dealing with people in Beijing first time getting one will it be a brick in two years
Excellent video Eric :) do your keys have a battery or chip by any chance because hear some do on certain makes also models take bit longer to do programming keys up ! Yes video always helpfull too and excellent to!
Global Launch. They are handled by Kingbolen here in the USA and are every bit as awesome as the USA models for 1/3rd the price while not having to deal with the terrible USA tech support.
In many of these "key"/Immobiliser" videos the video maker is unclear as to if the key is turned to position 1 (no engine started) or position 2 (which starts the engine) can you clarify please Great video
May I ask, what's the difference between the Pro Elite and the Immo Plus/Elite versions? Or the CR191E/X? They're all so differently priced but I don't quite figure out what the actual differences are - Could you help?
@TheCalax it's different programs and functions I would guess, you would have to read the product description and service functions to really know what's different
I've got the same tool and the pro elite ace, have you ever used the launch transponder programming/reading tool? I'm curious to see if it is worth buying
Good afternoon, I tried this with a Launch X431 ProS V+ and a 2015 RAV4 XLE but it always fails when it gets to the insert new key part. I get a pop up with a communication error between key and ECU. I made sure the key had the same letter on the blade.
Registering the new keys obviously requires some kind of scan tool, but do you need extra software subscriptions? Is it possible to program a new key if you don't have a working key, i.e. a "master key"?
@@FarpointRestorationsAndRepairsWhat about Kia amanti 2007 buddy I put a new ignition lock cylinder in my car it came with keys I turn the key in the on position lights come on but car won't start do I need this device you have to program it or can I program it myself with the device
@@FarpointRestorationsAndRepairsI still have the original key the reason I'm not using the key is cuz the key got stuck in the ignition I did everything to get it I finally got it out by removing the ignition lock cylinder I'm thinking my key may be worn out I'm not to sure 😂 with new ignition lock cylinder and the new keys can i program it to the car somebody said i can put in the on position for 10 mins and 30 seconds and then turn it off and then do 10 mins and 30 seconds again turn it off please help 😢
@FarpointRestorationsAndRepairs this was a two part question. What was the answer of no regarding? I have a 2007 honda pilot that needs new keys. I will be changing the ignition switch
Hi,.I don't have the original key, I lost it. I have a spare that will open doors and start the vehicle, but it will turn off since it's just a spare to open doors. I need to program a new key. How can I do that if I don't have the original programmed key? I have a 2007 Jeep Cherokee 3.7.
Great video. You got a new subscriber. I just purchased a x431 pro ace and want to learn more about what it can do
There is a ton to learn on those tools, take your time to see what all it has.
Nice it Works Well! Now on to next video on how to program lock and unlock, trunk remote. You have a link? 😊
In the description
How can I program the steering angle on it
Go into SAS (Steering Angle Sensor) and hit re-calibrate.
This video was very straightforward and helpful. Thank you.
You're welcome!
Glad it was helpful!
Wonder if it can do a Chrysler mini van key.
It might be able to- it will do most cars, but not all
How do you go about it when you have lost the master key, but want to program a new key with blank chip?
It can be tricky. If the blank key will still turn the car on to KOEO you should be able to delete all keys and program the new ones. If not, You are looking at a dealer fix.
What are the list of vehicles launch x431 pros v+ elite can diagnose?
Far to long for me to list, but it may be on their website.
Hi. I was wondering if you know the process of the key code erasure on a Highlander? Will I it delete all registered smart keys and will I be able to register the smart keys that I do have? That way I can eliminate the keys that were lost in the past.
Yes. You can clear all existing remotes and keys if you want to. Then you can program a fresh set. It's in the same listing I show here. It's the ad new keys or remove all option.
How does the elite compare to the pro3+ in general? Does the 3s really deserve the price difference?. How much is topology of a real difference?
To be honest, other than the larger screen and a few tweeks to the OS, they are much the same. Of course the biggest difference is that the Pro3+ is wireless where the Elite must be plugged in to the OBD2 port. Both are really impressive with the coverage and value for their money. I've owned a lot of Snap-on, OTC, and Matco products and this one for the price crushes all of them.
Is it possible to replace/program a 2017 volvo smart key with this?
Yes, but you will need the immobilizer add on for that key.
@@FarpointRestorationsAndRepairs Thank you for the answer. What is that, key usb connected key programmer you mean?
Hi.
Can this device also add functionality on a newer Toyota or Lexus, say using the remote to lower and close the windows but hitting the remote button?
It does have the ability to turn on functions. On my Mirage I added fog lights and used it to activate that feature in the ETACS System. Not sure about that particular item on the Toyota, but it certainly does have those features.
Bro can you tell me which is the best scanner for everything? Even programing new cars plz
That my friend is the problem. There is no "best for everything". Each tool I own is really good at a lot of stuff, but is missing something. The good news is that these days most are "Good enough". I own a 16K Snap-on Zeus. It's garbage. I prefer this tool 10 to 1 over it.
Do you have a process for a Nissan vehicle cause not seeing the immobilizer/program key function?
Is this a question on if the scan tool or the vehicle- Will the scan tool not see it something else.
I have a key fob to program for a Nissan rogue but I can’t find the process to register the a new key. It’s not as easy as the Toyota. I have the same launch scan tool
I wonder if they are the type that have to be done with the special adapter? I was going to get one until I realized the Toyota I had did not need it
Nice to meet you, do you know how to use the immo reset function?
There are so many cars, it is different on ever one.
Have you used launch x431 pro elite off amazon? I bought one from launch china. Whats difference between launch scan tool from usa and china?
About $2000--- And the customer service is handled by Kingbolen (global service)-
@@FarpointRestorationsAndRepairs thank you. I have reached out to kingbolen. It's nice to know who to contact if I got general questions or issues with my laumch tool.
Hi Great Video Can I use this to program new keys with no master key available
I think that would depend on the car, but it's a much more complicated thing. You'll need the pin from the manufacture for that specific vehicle. To get the pin, you'd have to verify ownership.
Ok so any suggestions how I do it with no Master Key
I have 2007 kia amanti i bought a new ignition lock cylinder off eBay it came with new keys to it I installed it in the car when i turn the key to start car dont start but all the lights come on do i need this device you have to program it or can i program the car without it i still have my original key but long story short it got stuck in the ignition 😂
This is what you need! As long as the car powers on, you can program the keys to match the Immo.
Hi. Might seem a dumb question, but can I program xhorse and other brand keys withe the Launch?
Hmm. Don't know that one. The keys and key fobs I've programmed so far are Amazon generics so I'd think it would.
This work with a Nissan patrol NATS system, in Australia?
I am not familiar with that system here in the US-- Sorry
Can you program the vin into an explorer pcm with this programmer ?
You would would need the Pro 3s+ elite. I have a video on that model
can it read pin code
I tried on ford everest 2018. It says serial number access is prohibited. Maybe you have an idea on how to fix
I haven't heard of that model. Is it a us sold car?
Hello my friend, can you send me the download link for the device you are using? X-431 PRO ELITE V1.00.003
I am not sure what you are asking-
hace falta comrar aparte el key programer ?? o difectamente funciona asi ??
For the majority of cars, this is all you need.
Did you register new keys with their own code to the PCM or did you write the code for your original (master) key to the new keys?
Yes to the PCM- the tool programs the codes automatically
Thank you for answering me!!
Where would you buy the key from the dealer? And where do you get the key cut out at becuase I believe the key comes without the key cut.
I bought the keys I needed on Amazon or Ebay- I had an original key, so I was able to get the new ones cut from a local hardware store.
Is theImmobilizer programming module something that has to be purchased ?
You can do about 50% with just the tool, the other 50% will need it. Mostly the European ones will need the module.
@@FarpointRestorationsAndRepairs Thanks for the reply
Thanks for your video! It would be nice to see more video with launch functions!😊
Coming soon!
Do you need an original key to use this? Ive damaged one transponder, and have no spare.
I will have to double check. Some makes and models have the option to delete all existing keys from memory and allow you to start with a fresh key. I'd check in the programming section to see if your car offers that option.
The bigger issue is how do you power up the car to gain access to the computers with no key?
Well, I bought an OEM key from O'Reilly's. I used the autel km100 and was able to use that to program the new one without the original. The new key didn't power the truck on fully before programming but would turn the truck electrical on, such as radio and dash info allowing me to program the key with that device.
@@juanweisel1720 Good to know! So as long as the key is cut to work in the ignition lock, it will power up? Very cool.
@@FarpointRestorationsAndRepairsis Kia amanti on the list 😂
Yes
I just bought mine off Amazon x431 pro3s+ how difficult is it to get the updates after the 2yr due to dealing with people in Beijing first time getting one will it be a brick in two years
Not at all. Kingbolen sells updates on their website and a handful of other companies do as well. I was able to update mine for less than $320.
Your a awesome teacher!!!! New to the game cool channel btw
Thanks for the kind words! Hope you enjoy some of my other videos as well.
can it erase and program the ECU ?
No. You'll need a J tool for that.
Can this program 2021 ram long horn?
Yes.
did you cut the new key to match old key or completely new design
I just took the one remaining key and had the new ones cut to match.
Excellent video Eric :) do your keys have a battery or chip by any chance because hear some do on certain makes also models take bit longer to do programming keys up ! Yes video always helpfull too and excellent to!
This one is a chip type. In my next video on this tool I'll program a battery powered remote for the locks. Maybe it will take longer?
@@FarpointRestorationsAndRepairs no problem Eric :)
Will this do dodge keys 2008
Yes.
It has to be online to reprogram the PCM ?
It depends on the model of vehicle.
@@FarpointRestorationsAndRepairs 2009 Lincoln MKS
I am not sure on that one- Sorry
Do you already have a chip inserted in the key or not?
Thess are programmable keys right from Amazon. Sold as blanks, you get them cut, and then program them as shown.
@@FarpointRestorationsAndRepairs Thank you very much.
Have you programmed a Bmw key yet? And which bmw?
I have not done them before- sorry
Do I need to buy the key programmer separately? Or does it work perfectly like this?
for about 80% of cars, this is all you need.
will do on ford cars?
From what I have read, it will do some but not all. Sorry
Good morning everyone I from guyana in South America I'm using the launch x-431 pro3 Ace model :OADD-PO1005A and it's mostly different from all this
Really- I wonder if it is because of the different locations (South America)
Excellent video pls how can i afford this over there
I got this one on Amazon, but Kingbolen also sells them.
Is that a launch usa or a launch Ltd co
Global Launch. They are handled by Kingbolen here in the USA and are every bit as awesome as the USA models for 1/3rd the price while not having to deal with the terrible USA tech support.
In many of these "key"/Immobiliser" videos the video maker is unclear as to if the key is turned to position 1 (no engine started) or position 2 (which starts the engine) can you clarify please
Great video
Key on, engine off. Run position. All accessories should be powered up.
Is this a bidirectional scanner?
Oh yes, 100%!
I have the immobilizer programmer and it's complicated to use. Man I was over complicating this
Ha! Yup, I've been known to do that from time to time myself. Glad I could help!
May I ask, what's the difference between the Pro Elite and the Immo Plus/Elite versions? Or the CR191E/X? They're all so differently priced but I don't quite figure out what the actual differences are - Could you help?
@TheCalax it's different programs and functions I would guess, you would have to read the product description and service functions to really know what's different
Can you use this to disable the immobilizer?
Absolutely NOT
I've got the same tool and the pro elite ace, have you ever used the launch transponder programming/reading tool? I'm curious to see if it is worth buying
I have not, the keys that I made were able to be programed in the car.
@@FarpointRestorationsAndRepairs thanks for getting back to me
Good afternoon, I tried this with a Launch X431 ProS V+ and a 2015 RAV4 XLE but it always fails when it gets to the insert new key part. I get a pop up with a communication error between key and ECU. I made sure the key had the same letter on the blade.
I haven't tried one on that car, but I would triple check that you bought the right style of key.
Registering the new keys obviously requires some kind of scan tool, but do you need extra software subscriptions?
Is it possible to program a new key if you don't have a working key, i.e. a "master key"?
That depends on the car. Toyota? Nope, Mitsubishi, Honda? No. Volvo, audi, BMW? Yes.
@@FarpointRestorationsAndRepairsWhat about Kia amanti 2007 buddy I put a new ignition lock cylinder in my car it came with keys I turn the key in the on position lights come on but car won't start do I need this device you have to program it or can I program it myself with the device
@@FarpointRestorationsAndRepairsI still have the original key the reason I'm not using the key is cuz the key got stuck in the ignition I did everything to get it I finally got it out by removing the ignition lock cylinder I'm thinking my key may be worn out I'm not to sure 😂 with new ignition lock cylinder and the new keys can i program it to the car somebody said i can put in the on position for 10 mins and 30 seconds and then turn it off and then do 10 mins and 30 seconds again turn it off please help 😢
@FarpointRestorationsAndRepairs this was a two part question. What was the answer of no regarding? I have a 2007 honda pilot that needs new keys. I will be changing the ignition switch
Great video! Do you have one on programming key fobs? Is the LAUNCH X431 CRP919E Elite the same scanner capable of doing this?
I don't,
Did you ever figure out if it's capable?
Yes, I have a video coming out on it on the 25th showing the Elite programming a key fob for remote lock / unlock.@@johnsteele5961
is this scanner has an ECM /PCM reset?
It does
Hi,.I don't have the original key, I lost it. I have a spare that will open doors and start the vehicle, but it will turn off since it's just a spare to open doors. I need to program a new key. How can I do that if I don't have the original programmed key? I have a 2007 Jeep Cherokee 3.7.
You should be ok. As long as you can turn the key to the on position to power up the electronics, you are good.
@@FarpointRestorationsAndRepairs Thank you. Your videos are well explained.
I have the X-431 Throttle, i don’t think it’s the pro elite but can the model i have do the same?
I am not sure, I don't that version and I was not able to find out if it can or not. Sorry
nice video thanks for sharing
Glad I could help!
Nissan you don't even need a tool.
Good to know!
What do you need then?
There's always that one guy..
Because no one will steal a Nissan lol