How to refill a grease gun
Вставка
- Опубліковано 4 вер 2024
- The method I show here on how to refill a grease gun works for many types of guns. I currently use four different types, from pneumatic to large hand lever types and it works for all of them.
The grease gun that I show in the video is the Advanced Tool Design model ATD-5002 pistol grip grease gun. Bought from Amazon about 2 years ago and it is still working great.
Amazons product page: amzn.to/2yIywoS
What you will need...
A pair of disposable gloves (or ones that you don't mind getting grease on)
A new tube of grease. The type depends on what you are greasing.
Disclaimer: All products used in this video were purchased by me and all video content is my own and has been edited by me, Matthew Fox.
Note: Filmed using a Samsung WB250F
I love videos that are straight to the point. No changing diapers, stories about grandpa, feeding birds, just exactly what we need, thanks.
Your video is the ONLY video that shows how to refill a grease gun short and sweet without any BS. Thanks for getting right to the point. Big thumbs up!
Greasy thumbs up.
@@brentharrell 😁👍🏽 4/8/23
Thanks for making a simple process in a short video, too many people want to make 11 minute videos of this.
This is an exemplary video.
I'd like to see one more step added;
probably 70 percent of the refills I have done in the past fifty years,
and with every grease gun I have used,
it has been necessary to bleed off the air
trapped in the gun.
And I've never found a convenient and reliable method of doing so.
Don’t screw in the barrel all the way. Release the handle and turn it so it grabs the plunger inside the barrel. Then push on the handle and grease should start squeezing through the threads. There should be no air left. Then tighten the barrel down and release the plunger so the handle can be pushed inside.
My 72 year old Father enjoyed watching your video as a refresher. It has been a while since He replaced a grease cartridge. He mentioned that His grease gun is same model as yours. Now He can grease His repaired John Deere 24T baler and put it to bed 'till next Summer.
Sam & Barb Kensler p
The best video on any subject I have ever seen! No long discussion of what you had for breakfast, the weather, wannabe comedian stuff, etc. Instructive, to the point, and substantive. I'm subscribing to your channel!
Thanks for posting this I forgot how to load them up and spent 20 mins speaking french trying to load them the wrong way.
Simple, clear, well explained and to the point. Great video!
Thank you, no bullshit, just a simple and clear explanation of how to refill a grease gun
And this is why i appreciate UA-cam thanks!
Good video but I would like to offer the following. Grease guns I have used in the past used the pull out lever to actually compress the grease, so that a positive pressure was applied to the small piston that supplies the grease. For some reason most of these grease guns allow the piston on the rear spring pullback to slide right thru the grease and do very little. A trick i have applied is to add more grease to the cartridge, this is a small fix, but a better fix would be to find a rubber washer the same size as the hole in the cartridge, and then allow the spring loaded disc at the bottom of the gun to do a better job.
Hey thanks - this was really helpful. Got my first grease gun the other day and thought I was doing it wrong- I didn't understand why the plunger rod went all the way back in after I loaded the new tube. Cheers and thanks!
Thanks FoxKnowHow! Same as Pay Way, I forgot how to do it and finally decided to just check the right way on UA-cam.
I'm covered in grease! But I learned how👍
Very handy video for newbies
Short and too the point
Thank you
Precisely, concisely perfeck! Now I won't make a huge mess & possibly lose an eye! Thank you!
THanks. I wasnt sure which end went in first. makes sense when you see it:)
I HAVE HAD SO MUCH TROUBLE LOADING GREASE GUNS. FANTASTIC VIDEO. THANKS.
Thanks for the video. First time refilling, I couldn't figure out how to remove the old tube because the aluminum lip fell inside, had to pry it out!
Thank you. I did not even know that the cartridge had to go inside the grease gun. No wonder I had a probem loading it.
Well done, easy-to-follow instructions. I'm 78 years old and never could reload a grease gun without cussing. Until now. Thanks.
And there can be only one! You straight up sound like The Highlander lol. Thanks for the help. Thumbs up.
I made a hellz of a mess over the holidays while replacing the upper control arms on my dad's car. I went to replace the grease tube and that crap went EVERY WHERE! lol..just a case of assuming I knew what I was doing. don't be this guy, watch a video! thanks for sharing the awesome vid!
Haha saved me from looking like a donkey cheers mate!
Thanks! All these years using grease guns I always forget which end goes first 😂😂😂
Thank you for sharing. I'm new to this king of work
Perfect for the same style grease gun thank you!
I’m an idiot, thanks for making that clear… lol. I’m pretty handy, guess what tried helping dad fill a grease gun and was ready to throw away. Did everything wrong…. Then watched your how to video. Thanks!
Great Video. Straight to the point! Very considerate not to waste the viewer's time with useless BS. Everyone attempting to make an instructional video should watch this first!
thanks I needed that
Thank you so much!!! I had so much trouble trying to do this....i love your video. Short and step by step. I think I can do this now;)
Exactly what I needed. Thank you.
Thank you exactly what I needed to know in a very quick amount of time.
Thanks Great informative video.
Great video brother. Thanks for the lesson, it helped me get it loaded quickly. 💪🏼
Very helpful and to the point. Thx
This is my go to video saved in my notes for doing this but question: anyone else have to put tip against something in order to get the new tube of grease to get the grease to start pumping out? That’s what it takes for mine if I don’t I just keep pressing the handle forever even after I’ve pressed the air button
You can remove the old tube easier by leting the rod in, most times you can shoot it into the trash but at least it comes out enough to grab the outside of cartridge. Good video
Exactly what I wanted
Short video to the point
I wonder if this works, on those cheap Harbor Freight units.. those are junk.. lol And, I had little luck with the inexpensive units from Tractor Supply Store...
Is there anyway to test the lever/grip mechanism.. to ensure that it is working properly? Thanx for Posting/sharing
One of the best video👏🏼❤️
Parabéns pelo vídeo. Aqui usando um cartucho de graxa. Simples e objetivo.
Wish all instructional videos were like this.
I don't use them enough and always forget how easy it is to fill them.
So it comes in a TUBE???
So much less mess than the way i was taught...
Thank you!
Hey, Man! I’ve been fixing shit for years and haven’t changed out the grease gun, literally since I can remember, and I just needed a quick tip. Don’t worry about these knuckleheads giving a thumbs down. This was spot on AND quick! Thanks!
UA-cam doesn't let you give thumbs down in case you haven't noticed it has become woke lol
Thank you! Great video.
Good video- you get to the point- thank you
No thank you sir for a great video!
Thanks for sharing! I messed up my last refill in the dumbest way 😂
Nice video, but you sure made a mess there at the end, reminds me of me"
Thank you
Great video simple instructions 👍🏻
Thank you bro
excellent
Informative video...thank you!
Very informative and to the point, thanks I needed this for work!
Thanks mate
Thanks man!!
I asked my boss how to load one of these and he told me to just look it up on UA-cam so here I am
My boss must have a shit grease gun. Every time I pull the plunger back a ton of grease shoots out the bottom of the gun. Then I get blamed for making a mess lol
the plunger seal is shot,,, get a new grease gun
thank you man,i love you,you help my life
After watching your video I think I got this!
Looks like i did it completely wrong, Thanks for this.
Thanks,Steven Wright. You're a pretty alright dude
Spot on! Thanks.
I be doing that for yrs, but.have a hell of time. Getting it primed again. Pissing me off everytime i replace the grease cartridge.
Excellent.
Great quick tutorial, only thing is why pump out/lose the old grease?
Depends what you're using the grease for - it may not be compatible with your intended use...
I need to install and grease end links on my car. Also like to grease my 3 ton micheline floor jack. Would these use the same type of grease, which grease would you recommend?Also as far as buying a grease gun, would you recommend the Lever vs Pistol Grip vs Mini type gun?
THanks, this was helpful.
Jesus Christ I am an idiot for knowing how to refill these working on cars as much as I do... Great vid really helpful!
Should the plunger be pushed in the whole way for the last step? You left it out about 2".
Gracias Mr.
Pro in mind pro in action
Gracias
Thanks
I've been using mines wrong for years lol.
(1) My gun has a spring button valve on pump to let out air. (2) I will have to give up now looking for a fail that shoots a blob of grease out of the end.
Thanks, it needs to be repeated: no frills, no silly intro, no loud music, a steady cam, spoke up to be understood, no unshaved buck. Just two working arms and a grease gun!
Thanks!!!
Are those BlueJays making all that racket? I miss them so.
thanks appreciate it.
You're not filling a grease gun, you're putting in a new cartridge.
拎開鎗頭兩下,拉弓,LOCK住
拎開鎗頭,拿走舊支油
拿新油,開蓋,再放入
入哂支油,打開油蓋掩
放回鎗頭,拎盡,再拎開兩下
回弓,再拎實
試打,正常出油就得
why should we buy the new catridge again and again? Why cant we refill the grease ourselves in the catridge ?
Time to buy new gloves!
thank you sir. i threw away 3 pairs of gloves tryinf to figure this out
Thank you :)
Thanks dad
My canister wouldn't fit plunger in grease canister. Plunger won't fit in canister
The go to how to... thanks for the “NoFuckinAroun” video. Great.
This is ASMR
re-taught an old dog an old trick /v gd thx u m8
Is it available in India
Can i load it with a .45 acp rounds
Well that was easy. The instructions that came with the grease gun was horrible. Thanks!
What cc size is that gun? You don't get a sense of scale looking at these thing online 😂🧐
any tips on how to keep them from leaking. mine leaks red shit all over the place.
+MegaChevy65 Good question. I think they get moisture inside. I have mine hanging on the wall and they leak all over the floor beneath them. Not much that you can do. Maybe I should store them in a bucket.
+MegaChevy65 There is a neat solution to that on page 37, April 2016 issue of The Family Handyman magazine. It’s in “handy hints” submitted by Steve Goodrich. I keep my grease gun in a heavy plastic bag until I can get mine made.
longsyo What is the solution? I don't subscribe to any magazines.
+MegaChevy65 i keep all my grease guns inn a 5 gallon plastic bucket. They will all leak.
Would of got fired if i didnt watch this video.. quickly fixed the grease gun while my boss was getting smoko. Thanks
If you'll get fired over such a small thing, it's time to look for a better job
TheFlorisJ His job is filling grease guns at the grease gun plant.