Getting A Secure Fit With Your Grease Gun
Вставка
- Опубліковано 10 кві 2018
- Hey guys! In this quick tip video we show you how to get a proper and secure fit with your grease gun to a grease fitting.
Enjoy & thanks for watching!
Find us on Facebook:
foresttofarm
Find us on Twitter:
foresttofarm
Good Tip that I did not know, Miss you'll s Videos
Thanks you. Thanks for commenting. We miss being here but Covid, high building materials prices and health issues with my wife have held us up. I am extremely excited to say that we should be back posting very soon before the year is out. Sadly because we have been inactive as far as posting videos here UA-cam has reduced our position as far as “suggesting” our videos. Amazingly we still get lots of traffic but not near what it was. Once we start posting again we should really take off again and from there on out I see no end in sign for our content. 😁
What would really really help us out is if anyone reading this would care to share us on social media. We will be posting to Instagram , UA-cam and likely facebook for anyone who cares to follow along.
@BenAlvarado1959 thanks for sticking with us!!! Much appreciated 😁.
Terry
Bought a new grease chuck, thought it was defective. But by accident found out by tightening outer chuck sleeve it tightened right up, but couldn't remove it to save my life. Wish l had known this years ago. It would have been nice if it had an arrow along with the word tighten on the chuck. Great video 😊
@@tcmits3699ha ha I know what you mean. Thanks for watching!
Terry
@@ForestToFarm thought about it, never did read the instructions, who knew 😕two lessons learned
@@tcmits3699 My grandpa always said the first thing you do when getting something new is throw the instructions away, lol 🤣
can't believe that after fifty years I am only now learning this. You have done us all a good deed sir.
Thanks! Yeah its amazing how long it took to figure this out lol. Live and learn.
Terry
Exactly
I didn’t realize this either. I’ve felt it either grabs or i doesnt and I have to hold it on. Thanks for the vid!
I agree 100%. This man saved lives
I'm with you guys, I just learned something too!
I'm 73, and I never learned that. I worked as an auto mechanic, factory maintenance, and other technical jobs. I own 6 grease guns. Tomorrow, I'm going to see how many are adjustable. This could have saved me lots of frustration, lots! THANK YOU!
You’re very welcome! So simple yet so few of us knew haha. At least life will be a little easier from here on out 😁. Thanks for watching!!
Terry
@@ForestToFarm I'm 69 and on the farm but did learn about this 35 yrs ago. Excellent video but you should have mentioned that if the zerk refuses to take grease you can loosen the coupler to relieve pressure so you can get off the zerk. Then usually some heat applied to zerk will get it to accept grease again. Thanks for the video.
@@jefffrayer8238 Good points! Thanks for sharing!!
Terry
Been using grease guns for 60 years and NEVER KNEW about the adjusting tip on the end of the hose. Really glad to learn something at my old fart age !!
Never to late to learn!! Even for us old farts 😂. Thanks for watching and commenting!
Terry
I am old too😂
What makes you think your tip is adjustable?
Very helpful video!!! I'm sure a lot of people who've used grease guns for many a years feel stupid and enlightened all at the same time after watching this video. I know I do.
I agree, I felt the same way, lol.
Terry
Thank you for this! I'm ashamed to admit, I've been running grease guns for decades and NEVER knew this! And YES, like thousands of others (if they'll be honest) I've fought the very 'grease zerk battle' you just described!! ..... The sad part of utvall is, these 'problem zerks were usually in bad positions to boot! Thnx again for the tip! (Too bad to have learned it this late in life!) I'll be 75 in Jan.!! Lol Be Blessed.
You’re welcome!! It just goes to show you the old saying its never to late to learn something new holds true!! Thanks for watching for another old timer in the making!!😁
Terry
Been there done that
@@marklaine6050 Ha ha, seems like most everyone has fought this battle.
Terry
This changes everything
Ha ha, yes it does!
Terry
Everything greasy!
@@carlnikolov Lol
Count me among the many who never knew this. Thanks so much! Subscribed.
Welcome! Thanks for watching!!
Terry
I'm 72 years old and you just provided me another example of the old saw "you learn something new every day!"
Ha ha. Glad to help. Thanks for watching!!
Terry
Thank you sir. All these years of frustration solved with your video.
You are welcome. Glad to help!!
Terry
This explained something so simple that I just didn't realize. The cheap grease gun I bought, didn't have an instructions to explain this. Awesome video, you sir are a professor!
I find that once you understand something it suddenly becomes simple. Thanks for the kind words. I actually wanted to teach professionally when I was young. We did not have much growing up so I went with what was best for my young family. While in college I tutored/helped most of my classmates. I find you learn more from teaching something than any other way.
Terry
@Doug Thanks! Glad to help.
Terry
I have raced cars for years, won races and track championships yet did not knowing this. Wild. Thanks!
You’re welcome!! Glad to help.
Terry
After reading a number if others' comments, I totally agree that, regarding grease gun manufacturers' instructions, they're generally either nonexistent or vague ... (unless I've overlooked it!) ..... I don't know how many times this video has crossed 'my old and feeble' mind, having been ignorant of this. I'm sure that Grand-Dad, who I worked with on the farm for decades never knew this either ..... Of the tears of combines, hay rakes, disks etc, we fought zirks all the way through. Even my dad as, who was a mechanical genius ... The man could overhaul anything made, from a valuable antique pocket watch to an old Army tank. (Literally) He owned a former WWII tank, and did repairs and service on it himself.
In summary, what a Blessing the Internet can be when used for gathering info! Thank you again.
You are welcome and thanks for the interesting comments!! Yeah the internet can be a good thing for those who use it properly.
Terry
OMG! All these years I have been an idiot struggling with grease guns. Live and learn thanks to you.
Lol i think we have all been struggling for years. For some reason I suddenly thought :"ya big dummy why you fighting with this thing?" Like you said, live and learn.
Terry
Good morning, sir, even if you don't believe it. This is information that I didn't know. And the truth is that it has helped me a lot because, due to ignorance, I have used the grease injector incorrectly all my life. Thank you for taking the time to explain this information.
Saludos desde México 🇲🇽
You’re welcome. Glad to be of service.
Terry
Thank you for clarifying this! I have been fighting the very problem for some time when servicing my vehicles. I dearly appreciate it. I just went out to my garage to check my fitting and came to realize it is broken. Fortunately I had a spare from I've had for years. Thank you, Thank you, THANK YOU!
You’re welcome and glad to help!!
Thanks for watching!
Terry
I've watched thousands of videos on UA-cam, and this is in the top five of the BEST EVER!
I've always appreciated videos that people freely share their knowledge, and you sir are tops! I don't know how you thought of posting on this subject, but I see that it has a lot of views. Thank you so much!
In all my years I never knew this about grease gun end fittings. Not being a professional mechanic, I wasn't taught about it, and it was something that had never come up. I always disliked grease guns, happy only to need mine about once a year now.
My current grease gun has an end fitting that's too tight and has been difficult to get on and off. But I've owned grease guns that were too loose as well. Now I know what to do! Surprisingly, I wasn't even looking for grease gun advice, but this came up as a suggestion off to the right-side of a YT screen that I was on. I'm saving this video in my YT Reference section because I want to be sure to share it with others. Perhaps I'll find out that everybody I know already knew this. Many thanks!
Glad it helped you!! Sometimes the simplest solution eludes us all. Thanks for the kind words.
Terry
Holy crap, I feel like a dang moron! Never did I once realize that with all the years I’ve used one. I’ve thrown so many grease guns away over the years that just didn’t seem to work right. Thanks!!
Ha ha, no problem. I think most of us are in the same boat. Live and learn.
Terry
Yea, I sure was about to throw mine away too 😂
@@ivancedillo8 Ha ha
@@ForestToFarm I just went from being ab idiot to being Einstein! Thanks a million.
@@joedoherty8466 Ha ha, you are welcome.
Terry
Thank you so much. Just wish that I would’ve watched this video before I broke the grease fitting off of my lawnmower because I couldn’t get it off. At least you helped me get the old grease fitting out of my grease gun end. One viewer said in 50 years he’s never known that. Well I am 60 years old and have done a lot of mechanicing in my time and I didn’t know it either. & yes the close up was key to me as well.
Awesome! You are welcome and Thanks! Glad to help.
Terry
Awesome, I'm six years late but just greased both U-joints in my Tacoma and 4runner. Wish I knew of this little trick. Thanks for sharing!
You’re welcome! Better late than never lol 😂.
Terry
I started watching this video, paused it halfway through and went down to mess with my gun. I'll be darned, this is so helpful! My problem was never getting the thing on the zerk fitting, but rather getting it off. I'd yank and yank, and let the gun helplessly hang there, and think, "this doesn't seem right..." The close up at the end helped me see how it works, I was expecting the inner pieces to move more inward, but it's more of a "cinching" movement.
Thanks for the tip and video on it!
Ha ha, I have had the hanging gun syndrome myself more than once. How did we make it this far and not figure it out?, lol!
Thank you for watching!
Terry
I’m with you on this! Any tricks to to getting it to release?
@@Tracer88 We loosen it back up to release it on hard to work zerks. Check back soon we are going to do a video on a new type grease nozzle that I think you guys will love.
Terry
Same
I did not know also , everytime I use a grease gun i could never end up getting the tip over the zerk nipple it just blew my mind , now that I watched this awsome video I'm a professional.
Thank you 10 times .
Thanks for the informative post. Sometimes the simple, really helpful things are a long time coming. I'm 75 and just learned this trick.
Your welcome! You got that right. Took me a life time to discover it ha ha. I was like wait a minute. There has got to be a better way.
Terry
You saved my life! I have been breaking grease nipples by forcing the grease gun with blunt force. Then I decided to find why and your video just explained it. Thanks!
Your welcome! Glad to be of assistance.
Terry
I was breaking grease fittings off during the removal process. Of course I was jamming them on first off. I am an idiot. This video saved my bacon from more future damage!!
Same… thank you and thank’s UA-cam!
@@leftseat30 There was no rush so I left grease gun on backhoe overnight thinking the grease would seep into joint. No luck so I did know to loosen the 2 pc. coupling as shown to relieve pressure using two curved jaw Vice-Grips. I took fitting out and unclogged it with some heat and grease gun. Great video needed by many and no you're not an idiot because nobody explains this.
@@leftseat30ha ha glad to help!
Terry
I watched this while standing in tractor supply company and searching for a “grease gun adapter”-- a larger one. This video really helped me see I just need to adjust the tip of what I’ve got.🤯🙏
Glad you found it and glad to help!! Thanks for watching!!!
Terry
@@ForestToFarm Since using your method, I have been able to insert grease, but the thread lengths of my adapter are so short that I almost have to disassemble it from the tube, and the tube connector to loosen it adequately. Quite a greasy ordeal. I hope to find a similar connector with longer threads perhaps.
@@SuperMulletguy Good luck!!
Terry
Thankfully you explained what I’ve been wondering about regarding keeping them locked into position while greasing. Thanks a lot man a lesson I’ll carry with me for life & I certainly appreciate it. 🤙🏻
Love it! You are welcome. Looks like we are going down in history with this one ha ha. Thanks for watching!
Terry
Amazing how no one else gives these critical instructions to getting the coupler on and off the zerk. Thank you so much for putting this video together, with an excellent explanation!
Your welcome and thank you for the kind words.
Terry
First time grease gun user-this was so helpful as the "instructions" on my gun don't even mention this. I guess they assume only experienced mechanics would ever own a grease gun?
Glad to help!! From what I gather almost no person has figured this out. I guess no grease gun instructions have the information on how to do this? I have never seen any.
Terry
My mind just melted. Thank you I never knew this was a thing.
😂 you’re welcome! Thanks for watching.
Terry
Things in white hair heads are invaluable. Keep them coming.
Ha ha. When I was just a child I would hang out with this old man in his workshop/ garage where he did odd job repairs on just about anything. He was a WWII vet. He went in at 15 year’s old as did many kids in those days. He only had a 4th or 5th grade education but he was very smart about fixing stuff. I learned so much from him and he had so many good stories to tell. My mom asked why I hung out with him over my freinds most of the time? I said because he teaches me stuff.
I never thought of myself as being the teacher. 😁
Thanks!
What the heck, one more. There was an old man about 85 working at a trash dumpster location. He again had very little education. This was about 35 years ago. He had some many interesting things to say. So I would go on Saturday mornings when he opened and hang out many times till noon just talking with him. One day my wife pulls up about 11 am and says “I thought we were going to the movies this morning?” I said sorry I forgot. She said you are the only man I know of that has to be hunted down at the trash dump. No cell phones back then. I asked if she would rather I hang out in a bar lol. She said no this is just fine🤪.
I have many more but I have to go get ready for some work today.
Thanks for watching!
Terry
Been working on things for next to 40 years, and I’ve never known this! I too was “that guy” ripping the hose off the zerk with all my might; or holding with one hand and use the gun with the other. Thanks for posting.🇨🇦👍🏼
Ha ha we all pretty much made the same mistake. At least we can move on from here.
Terry
I guess you can teach an old dog a new trick. I'm 64 I wish I had known this when I was 20. This is GREAT.
Ha ha, Thanks. I think pretty much everyone feels that way. Sometimes the simplest solution is right there in front of you. You just have to see it
Terry
Count me in as one of those who didn't know this info. Searched and found this after snapping off an aluminum zerk fitting on my outboard trying to wrestle off the coupler. I thought it was the new gun I was using. I went out and got a replacement coupler and got the same result. Thank god for UA-cam (that's a really weird thing to say). Anyway, I went immediately to the garage and tried this out and now I am enlightened! Thanks for posting this.
You’re welcome! Seems almost everyone had no idea haha. Life will be a bit easier for all of us from here on out 😄. Thanks for watching and commenting!
Terry
Thanks! You just taught an old dog a new trick ! We are never too old to learn.
You are welcome! Seems this little trick slipped by most of us old dogs lol! Thanks for watching!!
Terry
I found that after a few weeks of experience that I could get the nozzle set so that it could be pushed on and flicked off without turning the barrel to change the tightness. After an absence of a few years of operating a grease gun I found myself have trouble getting the nozzle onto the zerk. I had forgotten that the nozzle twists to tighten and loosen. Thanks for a much needed review.
Your welcome. Yeah there is a “sweet spot” where it will work the vast majority of the time. Glad to help and thanks for watching!!!
Terry
I'm stunned....How have I never figured this out? Thank you
Ha ha join the crowd!!
Terry
I’ve been using grease guns for 30+ years…never knew this. Thank you.
You’re welcome! Thanks for watching!!
Terry
Thank you for such a detailed explanation! I was aware of the the trailer-hitch-type design, but the grease gun adjustment closeup really drove the point home. I noticed that my grease gun fitting had to be perfectly perpendicular to the zerk fitting mount to prevent grease from squirting out the side that is furthest angle. And it was very hard to get off when done with a zerk fitting. I was thinking about buying one of the zerk fitting clamp devices with a locking/unlocking lever, but now I know it's built into the grease fitting end. I checked to be sure and it is. You saved me at least $25 and the Pro one is $50. Isn't it great that a video made 4 years ago is still helping people? Thank you again!
Its is great! Thanks for watching!! Love helping people.
Terry
I am among the many who never knew this. Thank you very much
.
You are welcome. Amazing how it slipped by so many people.
Terry
Never realized this either! Live and learn. I’ll be checking out my grease gun this afternoon as the tip was slightly different. Thank you.
You’re welcome! I hear some will not adjust. Good luck!
Terry
Thank you! I can't believe I have been around grease guns for over 50 years and never realized this and was never told about it until now.Thanks!
You are welcome. Yeah I think most people were in the dark about it. It just hit me one day. I was like you blundering boob, lol.
Terry
I had problem pulling the grease gun off the fitting the first time I used this tool today. Thanks for explaining the physics behind it
You are welcome! Glad to help.
Terry
Perfect... bought my first grease gun today & did not know this! Thanks 😊
No problem. Let us know if it does not work like the one in our video. I have been hearing there are some that are made in a different way these days. I have yet to actually see one.
Terry
You earned a new subscriber - I am 58 years old and this is the first time anyone has mentioned this in my presence. Thank you.
Ha ha, join the crowd. Not sure what made me think of it but sure glad it happened, lol.
Terry
Perfect just started Greasing and sounds like the best Tip i’ll keep to myself
Thanks for watching!
Terry
Thank you! Wow I am glad I found this video. I do alot lubrication on the machinery and conveyors at work for the past 5 years. We learn something everyday. Thank you :)
Your welcome. Yeah its a time saver and frustration eliminator as well lol! 😂
Terry
I was trying to grease my truck today. Long story short, after saying f words 20 times because the grease gun was stuck on the fitting, the truck never got greased. I'll be back at it tomorrow thanks to your video. I never knew that's how the end of the grease gun worked 🙄. I'll update you tomorrow 👍
Aeesome! Please do let us know. I keep gearing some nozzles are not adjustable but I have yet to come across one like that. I have to admit I have not looked for them in stores so they may be plentiful for all I know. Good luck!
Terry
OMG THANK YOU! I had no idea, just like you said. You just changed my life.
Ha ha, glad to help!!
Terry
I discovered this technique about a year ago on my own. It works wonders. Keep in mind guys and gals out there. Clockwise to loosen and counterclockwise to tighten. Saves the wear and tear on your jaws and the stress of pulling the tip off your fittings. Also the wear and tear on your fittings causing leaking during the process. It’s actually more enjoyable to grease things now. 😊Thank you for your video. Looking forward to more. 😁
You are welcome and thanks for watching!
Terry
Just bought a cheap HF grease gun to grease my new suspension parts with zerk fittings. It went on snug with zerk fitting but didn't come off by tilting coupler and pulling nozzle as user manual recommended. Watched couple of videos including this one, I learned about adjustable coupler at tip of nozzle. After loosening it by hand while holding another adjacent nut closer to the gun, it came off easily. Your advice will certainly help lot of people. Thanks.
No problem. Some times the simplest solution is right there, we just have to recognize it. I spent most of my life fighting those things, lol. Check back some time in the near future. We bought a new type of nozzle and I think its going to be very useful.
Terry
After watching, 1:36 I've been replacing the tips on some of mine. No one advertises that they are adjustable. Thanks again
You are welcome again 😁.
Terry
I've used a grease gun for year and wondered why it would fall off and sometimes have a hard time getting it off. Now I feel dumb. Excellent tip. Thank you.
You’re welcome! I think due to the number of us not realizing this none of us were dumb. Rather we were just not being our smarter selves 😁. I don’t think I have ever done a job that I didn’t think of a better way to do it “next time”. Its that curiosity that helps me discover new ideas or ways of doing things.
When I was around 6 or 7 my dad worked on vehicles and about anything with a motor/engine for a hobby. I always wanted to help. Even back then I was curious. They gave me a small electric car for Christmas that had keyed cardboard things you run through it to control its direction. High tech for its time ha ha. First thing I did was run and grab one if dad’s screwdrivers and started taking it apart. Dad ask did I not want to see it work first? I said no I want to see what makes it work 😂. Been that way every since.
Thanks for watching!
Terry
Great video, very informative as well. This video was very helpful, believe me. I bought a grease gun just like yours, it came with that same grease nozzle , but I didn't understand why the tip was turning. It didn't look like the old solid dinosaur type grease nozzle, now thanks to you I know how to use it.
Thanks! It does help to understand the thing, haha. Took me 50 something years to figure it out. We recently bought the Lock N Lube nozzle. Should be a video coming some time in the future about it. I have a feeling its gonna be a good tool. Thanks for the kind words.
Terry
Sheesh. Totally missed that for all these years. Not any more!! Thanks!
No problem!
Life will be a little;e better from here on out, ha ha.
Terry
Thank God, you relieved a hell of a headache. thank you
Ha ha, you are welcome!!
Terry
Thank you for making this informative video! You were clear, concise, and quickly to the point of explaining how the gun and fitting works!
You’re welcome and Thanks you!
Terry
I've been greasing cedar shakes all these years and never knew this!
Join the crowd. :)
Terry
A super light bulb moment for sure!!! I have a mini gun I have never used because of the "potential" mess.. Lately I've been contemplating just going ahead and deal with the mess and try to get some grease in the fittings. Now I will have the confidence to get the job done right the first time. THANKS!!!!ASAAA
You’re welcome!! Yeah it was one those moments when you realize how clueless you can be lol. 😂
Terry
Simple, but man, YOU JUST TAUGHT ME A LOT! Thanks!
You’re welcome! Glad to help. Thanks for watching!
Terry
man I can't believe this - I was about to take my unit back to the store
man thank you
Ha ha. I have owned a few of them and always wondered why I was so incompetent with a grease gun. Most tools are a breeze for me. Then this idea hit me and it was a AH HA moment!!
Terry
I can’t believe I’ve never seen this before. Does the grease gun explain this when you buy it new? Thank you so much, I’m sure there’ s a million people out there that didn’t know this. Fantastic info. Thank you again.
You are welcome!! I have never seen any instructions telling about it but they may exist. I have not come across a single sole who knew about it before I/we told them about it.Thanks for watching!!
Terry
Mine sure didn’t but advertised it has an adjustable end. I didn’t even know how to properly load the gun lol. And then didn’t know what the rear rod and spring was supposed to be doing. Sheesh. The manual didn’t explain anything
@@The_RC_Guru Yeah they do not always give a good manual.
Terry
Yeah, the manuals are suckful.
NOW a flex line on the end of a grease gun makes sense !
Your video should go viral !
I don’t want to think about how many of these ends Ive replaced over the years !
Thanks!! You could always share it far and wide 😁. Thanks for watching and the kind words.
Terry
You are the top, my friend!!!!! I never knew this!! Now I can "grease with ease"! (I crack myself up!) Thank you so much for your video!!!!
Thanks!! You’re welcome.
Terry
Bloody hell, all those years thinking any grease gun I get my hands on is crap! lol
Cheers
D
I hear ya, lol. I am amazed that nobody knows about it.
Terry
Hi...dont know what to say...
Ive been using grease guns for many years and hadnt realised the jaws were adjusterble... Always had to fight to get it on n off..
After watching this i went out to the garage at 11.45pm to check my grease gun and it seems your right. Will check my others tomorro..
Thanks so much.
Your welcome, Lol, I know what you mean. I was as surprised as you are. Not sure what made me think of it but sure glad I did, ha ha. And it only took 56 years to figure it out!
Terry
Thanks for posting this! I had the opposite problem - the coupler wouldn't fit on to the zerk at first. Once I loosened things up (took a lot of effort) I was able to couple on to the zerk with no problem. Thought I was going to need to purchase a new coupler! Thanks, again!
You’re welcome! Glad it worked out for you. Thanks for watching!
Terry
Simply one ne of the most helpful videos on UA-cam for me. Thank you very much!
You are welcome and thank you!
Terry
I'm 56 years old and never knew this until today!
Its amazing how it was right there in front of us our entire lives. I honestly do not know what made me think of it but it seams no person I have come across knew about it. So simple yet so overlooked.
Terry
Dude... I feel so stupid. I didn't realize that the gun screwed tight. thanks man!
You are welcome. Ha ha, don' we all.
Terry
I only need one hand to "pump my grease gun all day long." (Sorry, I couldn't resist!) Thank you for this vid. Very helpful for a first-timer.
Glad to help!
Terry
Bless you - wonderful and gentlehearted teacher and improved my car maintenance experience 110%!! thanks.
You are welcome! I do not think I have ever discovered a simpler method of doing anything that was right in front of us all yet no person I have talked with has ever realized it before now. There is always something new to be discovered. Makes life fun.
Terry
When I get to heaven, I'm going to ask my grandfather if he knew about this... Here I've thought for years that nothing in our shop would take grease. Thanks for the tip!
No problem. Let me know what grandpa said when I get there.
Terry
@ ryan knight
Thanks for the good laugh.
I need to ask mine the same🤣🤣🤣
@@wholegrain27 Ha ha.
Terry
I'm still bamboozled by this!
I was trying to find out why my new grease gun just spills grease all around the zerk and was about to return it.
Ha ha. Glad to help. They can be a bear at times.
Terry
Most helpful video in a long time. Nobody told me it screwed on. Thanks!!
You are welcome. No problem, glad to help!
Terry
So easy and so complicated with not the right explanation. Thanks!
You are welcome!! It sure makes life easier!!
Terry
Thank you sir. You've got a little Ric Flair going on there
Ha ha!! I get the quite often. Actually I think Ric Flair looks a little like me, ha ha.
Terry
I never knew that, nice tip.
Hey Terry, I have that same exact grease gun, I have a constant problem where it doesn't like to pump grease. Its like it has no pressure. For any suggestions for that problem?
I just want to pitch it sometimes.
Hey we are actually doing a video to be out very soon explaining some tips on grease insertion. I think it might help you!
Did you notice the spring loaded bleeder valve on the top of the gun. We never had your problem yet but that may be the cause.
Terry
Be sure you primed it with grease the last time you changed the cartridge, and that you have bled all of the air out of the system. It may take several tries to get it going. There are several UA-cam videos on how to bleed the air out when you change cartridges.
@@Anonymous-it5jw Thanks for the info!!
Terry
I want to thank you for your video that you put out. My husband was greasing the bearings of our camper and the Grease gun got stuck to the nipple. Try to find a video to help get the grease gun unstuck. But the videos only told you to twist the grease gun and tug on it and it will release. That didn’t work. Watching your video showed us how to do it and now we’re ready to go. Thank you for your video again Patty Bradford.
Awesome!!! Thanks for the feedback. Glad to help. And you are welcome.
Terry
I thought my grease gun tip was broke because it would squirt grease everywhere except in the fitting I needed to fill. THANK YOU SIR!
Lol you’re welcome! Thanks for watching!!
Terry
great tip!!!..i never knew it turned or was adjustable..always thought it was a universal "fit" and you hadta force the gun onto the tip!!!..wow.. what a dummy! lol!
Sure makes things easier.
Terry
Just a note, not all grease gun tips are adjustable. Most decent newer ones are now and I find you need to adjust them when using or they will stick on when trying to remove or fall off when greasing if you do not adjust them. The ones that are not adjustable work okay most of the time but you do need to hold them in place to some degree.
Thanks for the input. People have asked but I was not sure. All the units I have come across thus far were adjustable.
Terry
True I had to buy an accessory which came with this type of fitting. The one I had that was nota adjustable was so tight that it snapped the fitting on my jack...
I have never seen these adjustable ones, I am going to have to find one for my old Alemite grease gun. The old style does come apart, and you can take the jaws out and reverse them when they wear, but this new one looks like a much better idea.
@@TheMidnightNarwhalwow, I never had that problem before.
Terry
@@jusportelI have a grease gun that was my fathers 60 years ago or so. I used it as a kid but left it set for quite a few years. The grease set up hard in it 😂. Haven’t ever tried to clean it out. Wondering now if it is adjustable. Gonna have to get on that.
Thanks for watching!
Terry
Learned this back in the early 70"s in shop class, when cars actually had grease fittings that needed maintenance.
Cool. You are one of few that did know. Sure makes the job easier.
Terry
I have struggled with this for years! Thanks so much!!
Your welcome! I think we all have.
Terry
How did I make through 65 years without knowing that? Is that the way all grease gun tips work? This is embarrassing.
Ha ha, I was thinking the same thing. I suspected it might work that way and never tried it until recently. I honestly do not know if the older ones are any different. Anxious to check that out though. I have one about 35 years old. will check it out tomorrow and report back here.
We bought a tractor recently so we have a lot of grease work to do. That's what got us looking into it.
Crazy how things work out sometimes.
Terry
You and me both. 40 years I've gone and I just thought that I had one really good gun and a bunch of shit ones haha. Thanks terry
No problem!
Terry
Your not the only one lol
@@RussellCambell You're Russ, you're!!!
Sad to think that there are only 66,000 people that know this as I add my name to the list of people shaking their heads. I was just getting ready to write a letter to a company that put "defective" grease fittings on my new piece of equipment!! Phew, I dodged a big one.
Its crazy isn't it? How can we live a lifetime not knowing this? Better late than never I guess, lol.
Terry
never too late to learn. I wont say how many years I've been doing it without making it tight. problem solved thank you for this video 2:30
You’re very welcome. 😊 Glad to help.
Terry
LIB! I've been cursing these things all my adult life. I just wish that you hadn't waited until I turned 77 to tell me.
Ha ha. Sorry. I will try to do better next time. 😁
Terry
I got ya beat. I didn't even know what that weird thingie was. (the Zerk, that is!) I bought my FIRST wheelbarrow tire and it was there. I couldn't find any tire place that explained it. Not I know. I'll have to go and buy me a grease gun - once I know how often I need to use it! Thanks.
@@randymartin88 You are welcome!! thanks for watching and goods luck!
terry
Wtf, I thought I bought a defective end link with a bad zerk fitting from O’Reily’s, after watching this video I’m like ooooooooooooooh 🤦♂️
Ha ha. glad it helped you!!
Terry
THANK YOU! I'm new to using a grease gun and I was getting very frustrated trying to grease the fittings on my John Deere mower. After a few hours of on-line research to find a new coupler for my gun, I stumbled across your video. Immediately went to the basement to try this and VOILA!! So long to the "hold it tight with one hand while pumping with the other" knuckleheads! I wish the instructions that came with the grease gun would explain this. Again, thank you for your simple, straight-forward video.
You’re very welcome. Thanks for the kind words and for watching! Glad it worked out for you.
Terry
This is the most helpful video I've seen in years.
Thanks so much
Thank you!
Terry
Thanks. I learned something every day. Working on the fields, construction 🦺 jobs, CDL driver. Didn’t know that.
Your welcome. Looks like most of us have learned something new.
Terry
mind blown... I've been using grease guns for decades and nearly didn't bother watching! I'm so glad I did - thankyou!
You are welcome! I have asked many many people if they knew this. Not one person did. For some reason one day it hit me smack in the face, ha ha. Sometimes the simplest solution is right in front of you, you just have to recognize it.
Terry
Thank you for the tip. Embarrassed to say I never knew. Amazing
You’re welcome! Took me over 50 years to stumble onto it. It was definitely an aha moment.
Terry
I’m so glad you put this video on UA-cam. I was having trouble getting my grease gun off the fitting on my lawnmower today. My hose doesn’t allow you to spin the end, but I spun the entire grease gun and it came off! Wonderful!
Awesome! Glad to help.
Terry
Exactly what I needed. Thank you for such a thorough explanation
No problem, glad it helped!!
Terry
Thanks for a well done video. I was struggling with the grease gun coming off the grease nipple and you solved my problem.
You’re welcome and thanks for watching!!
Terry
Why wasn't I told? This is one of the greatest discoveries on UA-cam. Well done.
Thanks! Yeah it blows my mind. Nobody knew. I feel a little lucky. :)
Terry
Exactly what this newbie DIY mechanic needed. Thanks!
Awesome! You’re welcome.
Terry
Stuff like this is THE best use for UA-cam. Thank you for this video.
Thanks!! And thanks for watching!!
Terry
Great tutorial! You're never too old to learn something new!
Agreed!!
Terry
Best tutorial I have seen in a long time. Thank you!
You are welcome and Thank You!!
Terry