Logitech G25 G27 Encoder Foult Fix.
Вставка
- Опубліковано 16 лип 2024
- Hello Guys,
In this video, I am showing you my 3d printed Encoder desing for Logitech G27 And G25. I tested it on G27 and "Driving Force GT". But, G25 and G27 are almost same. I think, it will work on G25 too. My G27 encoder disk was 60ppr. But I designed 30ppr disk too. I tried 30ppr on DFGT. It worked at the rear of the motor. If you have 30ppr G27, I think, it is going to work.
00:00 Calibration Failure
00:38 3D Printing Settings
01:59 Prepearing Encoder mount
04:53 Prepearing Encoder Sensor
07:40 Disassembly of G27
13:10 Mounting Encoder system
18:01 Assembling G27
27:07 Result
"Logitech Driving Force gt" Encoder fix tutorial is going to come soon. But, I will upload files on cgtrader. You can download it too. Please, Wait for tutorial.
Please, Download only files you need for your wheel, Which you have got.
DFGT files are little bit different. I don't guarente G27 fix is going to work on DFGT too.
What you need:
-Encoder Board : CJMCU-83-AEDR-8300
You can find on aliexpress.
pt.aliexpress.com/item/330006...
-Connector Cable : www.ebay.co.uk/itm/291869470685
I didn't buy from this shop. It is an exemple
-5mmx5mmx1.4mm Mirror : www.ebay.co.uk/itm/4031859200...
I didn't buy from this shop. It is an exemple
-M3X15mm Philips Head Bolt
-M3 Nut
-Download Files:
For G25 and G27
www.cgtrader.com/products/log...
Driving Force Gt:
www.cgtrader.com/products/log...
P:S: I am going to sell it on ebay as a kit as soon as posible. - Авто та транспорт
Gonna try this later see how it goes :)
great！！ thank you very much
I am uploading an interesting video about g27 rightnow. You don't want to miss it.
@@MrCelali I'm interested in this fix/ upgrade, can you share some files?
I bought a new g27 in the box, but I had a calibration fix and opened it to check the plastic wheel, it didnt had any cracks so I moved it a little and adjusted the screws, I plugged it in and it worked like a charm but when I assembled it it stopped working and having the same issue as you. Do you think it might be a faulty cable going to the encoder? like u mention in 12:04
I think it is not all about cable.
Check the connector legs on encoder pcb. Most probably one of them is seperated from pcb
@@MrCelali I have the problem that the legs do not rest on the PCB
Do you have the diagram to solder it?
ola posso usar um 'encode incremental'
Hay friend, I have problems with my g27, when connecting it to the pc the steering wheel turns to the right and then to the left any times, then it stops and the led light of the shifter starts to blink, you think it is the same problem.I would appreciate if you give me any advice.
Hello, ı think your original encoder wheel has a crack. So encoder counting wrong. The Best way to be sure is open it. İt is not hard. If ı am right it can be repaired. Or you should buy a new encoder wheel. Chose metal encoder wheel. If you cant find. You can do my solution too.
My G25's encoder wheel has a small crack in it, but I also noticed during disassembly that the plastic body to which the motors attach is also cracked. Can I just replace the encoder wheel and put it back together?
It is hard to fix. Do your best to repair both. If it is not working, replace with another encoder wheel. If you can’t find a replacement part, the solution is in video
Have you made any kits available for sale?
Not yet
@@MrCelali how about now?
AAAAANNNNDDDDD, I WENT THROUGH THIS WHOLE HOUR LONG PROCESS, REPLACING THE ENCODER AND ITS STILL DOING THE SAME FUCKING THING.
Did you ever figure it out? I'm in the same boat.
logitech is worthless
@@aloex3994 absolutely
@@j0hncon5tantine never got it working again
I ended up putting a washer on the broken encoder to hold it together and now the whole thing works perfect....
Hi bro, i have a g27 and its working, but it has a problem. Every time i plug it, it calibrates normally, but every time i rotate the wheel to the right side the center becomes 2% away from what it was, so if you rotate it 2 times to the right the center becomes 4% away from what it was and so on. After five minutes of playing a game, the wheel will be completely uncalibrated. And if unplug it and then replug it, it returns to normal, and then it does the same thing i said in the beginning. Please if you know any thing about my problem, tell me. Thanks for reading my message.
İt is all about encoder wheel.
Disassembly the encoder disc. I bet there is a tiny crack. And the light is passing thrue. If you can't repair it, (maybe super glue can help) you must buy anotherone. I suggest to you buy a metal one. But be carrefull there is two type encoder for g27. 30 slot and 60slot
@@MrCelali thanks bro so much, appreciate it.
@@MrCelali but bro how can i know if it is 30 or 60 slot
@@raedamasha it is 60 slot; There is 60 holes, İf it is 30 Slot; There is 30 Holes . You can count or you can google it. Look at the pictures.
Feel Free To Ask. I'll answer when I am able
@@MrCelali ok bro thanks very much