Thank you my Friend. You are straight and to the point. I installed Virtual box from your previous video and installed Ubuntu using this one. Both were superb videos. Thank you
Man man man... U saved me.. I wasted more than an hour to get full screen eventually I found ur video at the very first search and it's done.. Great thanks..
Thank you for this well made informative guide! Just one thing, I didn't see you tweak internet settings. Does this VM have internet access by the default settings?
I can't get beyond 3:30. I push enter to install, and it literally stays at the image showing at 3:36. It has been over 20 minutes and that's whats showing. The prompt to install never even shows up. What can I do? Do I need to start all the way over?
To change the resolution, simply right click the desktop >display settings and choose the resolution Not sure what this command is for - sudo apt install -y build-essential linux-headers-$(uname -r) Could you explain what the need for that command is?
for some reason my cpu processor tab was lock to me I wasn't able to modify it, ig ill dig into it later but for now I just wanna get up and running, good vid btw
Hi, one question I installed Virtualbox and Kali Linux like you did in the video, it works too 😬. Can I install Ubuntu directly on my Kali Linux like in this video or is this video only for Windows? Thanks for Your answer.
Interesting question : why right after opening the ubuntu iso it consequently appears under controller ide (as i can see in your video 3:11 ), whereas (based on my own experience) after installing the guest additions I can only see the GA iso under controller ide, but I don't see there the ubuntu iso anymore ?? In fact, I can not see the ubuntu iso anywhere in the storage section of the ubuntu vm settings (neither can i see the windows iso in the storage section of the corresponding vm)
The native API dll was not found (C:\WINDOWS\system32\WinHvPlatform.dll) (VERR_NEM_NOT_AVAILABLE). AMD-V is disabled in the BIOS (or by the host OS) (VERR_SVM_DISABLED). Resultaatcode: E_FAIL (0x80004005) Component: ConsoleWrap Interface: IConsole {872da645-4a9b-1727-bee2-5585105b9eed} error after start
Thank you for the video! I am facing an unusual thing when I write the sudo apt install build-essential code. It asks me to put in the password again and when I try to type the password, it doesn't type anything. Please help!
No actually it is typing the password as it is password protected so you can't see the letters numbers etc. After typing the password of yours type enter you will understand that it's running
Can you help me to solve a problem when I click install Ubuntu it goes to the next screen en select my language but the screen is to small and can't see the next button. When I try to resize the screen the install image won't get larger so can't click on the next button. 🥺
hi there, when i used the link u provided to download the ubuntu image file, it's downloading a zip of folders and the image file isn't in any of the folders...if u know what i'm doing wrong can u help, tnx.
Hi, when i try to hit enter on try or install linux, it just is a command line that opens up, but not the other interface which has the options to install linux
Informative! The VM version you are using is outdated and doesn't work now. VM 7.x.x has a slightly different interface and options. Also it's good not to miss tuning video graphics to 128mb/max. Good job though
Hi, please when I click on start I get an arrir message " not in hypervisor partition, VERR_NEM _NOT_AVAILABLE VT-x is disabled in the BIOS for all CPU modes. What can I do
Brother i spend 5-6 hours on doing just one thing how to maximize screen ratio .. your video is such a life saver thanks a lot ❤️
Thank you my Friend. You are straight and to the point. I installed Virtual box from your previous video and installed Ubuntu using this one. Both were superb videos. Thank you
Thanks for the video man, works really well even in March' 2024
Man man man... U saved me.. I wasted more than an hour to get full screen eventually I found ur video at the very first search and it's done.. Great thanks..
awesome! thanks for your support
You are a lifesaver, i spent whole day searching for fullscreen resolution
Ubuntu is a Linux OS. I never had a Linux OS on virtualbox. But, this is going to be the first time I will have a Linux OS on virtualbox.
i'm using this to play old videogames, would be great to see some one make a video on that.
You have found a new fun I love your step by step explanation makes everything easy
how do you exit full screen mode?
Thanks a lot, i followed all steps and it work properly!
Thank you! I was able to get everything up and running!!
Fantastic guide! It was really helpful while also being precise. Thanks a lot, man!
which is recommended dual booting or virtual machine, keeoing in view my PC is i3, 10gen
?
Excellent Video !!! Appreciate brother for the help... Subscribed now for the updates
Thank you for this well made informative guide!
Just one thing, I didn't see you tweak internet settings. Does this VM have internet access by the default settings?
Thanks a lot for this video. This is soo brief and clear no doubts and no errors
The ubuntu iso file wont show up in the file explorer when I click Choose a disk file
I can't get beyond 3:30. I push enter to install, and it literally stays at the image showing at 3:36. It has been over 20 minutes and that's whats showing. The prompt to install never even shows up. What can I do? Do I need to start all the way over?
did you figure it out?
@@denis0026did any of y'all figure it out 😂😂🙏🏽 Plz respond
Thanks for the tutorial. I'm new to this so will the memory or RAM be returned or accessible to host os once the VirtualBox is terminated?
Great video. Followed your steps and they worked perfectly. Thanks!
awesome! on point stuff... working smoothly
The most accurate quide ! Thanks
My man, you are the best
To change the resolution, simply right click the desktop >display settings and choose the resolution
Not sure what this command is for - sudo apt install -y build-essential linux-headers-$(uname -r)
Could you explain what the need for that command is?
Great video, thank you pal
Very informative.. Thanks buddy
Glad it helped you
Heyy, rebooting ubuntu on the virtual machine in my system takes a lot of time(3 to 4 mins). Have I missed something or is it how it normally works?
Thank you so much for this useful content ❤
This video is more helpful for me thank you so much. ❤
for some reason my cpu processor tab was lock to me I wasn't able to modify it, ig ill dig into it later but for now I just wanna get up and running, good vid btw
i need help. on creating the virtual ardd disk, it is not showing all the parametrs as yours. so i am lost
Hi, one question I installed Virtualbox and Kali Linux like you did in the video, it works too 😬. Can I install Ubuntu directly on my Kali Linux like in this video or is this video only for Windows? Thanks for Your answer.
thanks! you should be able to do it the same way on different host systems
Thank you bro
youve helped a whole lot
Hello. I did everything and when I hot start it said failed to open session for the virtual machine Ubuntu 22.04. Could u help me please
Thank you. Helped a lot
Great! Loved it. 😇
Interesting question :
why right after opening the ubuntu iso it consequently appears under controller ide (as i can see in your video 3:11 ),
whereas (based on my own experience)
after installing the guest additions I can only see the GA iso under controller ide, but I don't see there the ubuntu iso anymore ?? In fact, I can not see the ubuntu iso anywhere in the storage section of the ubuntu vm settings (neither can i see the windows iso in the storage section of the corresponding vm)
I'm getting a failed to send host log error every time I boot the VM up after installation; any help?
What's the difference between the machine folder and the file location?
I did everything like you but when a write my pass after "sudo apt apdate" apears "invalid operation"
You are a real computer man.Kudos👍
The native API dll was not found (C:\WINDOWS\system32\WinHvPlatform.dll) (VERR_NEM_NOT_AVAILABLE).
AMD-V is disabled in the BIOS (or by the host OS) (VERR_SVM_DISABLED).
Resultaatcode:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
error after start
Is it affect the performace after running the vitrul box
Do you know anything about vagrant and setting up environments?
After maximising ubuntu it takes about 5 mints to turn on.... What should I do
Can I install Ubuntu and VirtualBox on a flash drive?
Thanks very helpful😊
thank you
Does this erase the disk of current OS if we try to install the ubuntu
Your videos are the best
thank you so much, you just helped me
Thank you for the video! I am facing an unusual thing when I write the sudo apt install build-essential code. It asks me to put in the password again and when I try to type the password, it doesn't type anything. Please help!
No actually it is typing the password as it is password protected so you can't see the letters numbers etc. After typing the password of yours type enter you will understand that it's running
Thank you so much my guy
Can you help me to solve a problem when I click install Ubuntu it goes to the next screen en select my language but the screen is to small and can't see the next button. When I try to resize the screen the install image won't get larger so can't click on the next button. 🥺
Really helpful thank you for making this video
Very helpful! Thank you!
Think You for this Video,
i had an issue of showing not in a hyper visior partition can anyone tell
Excellent, thank you
Super useful!!!!!!!!!
Thx great video
Thanks brother❤❤😊
Thank you so much😊
really helpful thank you very much
glad it was helpful
hi there, when i used the link u provided to download the ubuntu image file, it's downloading a zip of folders and the image file isn't in any of the folders...if u know what i'm doing wrong can u help, tnx.
the file is an ISO file, you do not need to extract any of the files inside.
thank you so much ...easy n short
thanks for watching
Hi, when i try to hit enter on try or install linux, it just is a command line that opens up, but not the other interface which has the options to install linux
Same here, did you find a fix?
thank you mate i did it
Informative! The VM version you are using is outdated and doesn't work now. VM 7.x.x has a slightly different interface and options. Also it's good not to miss tuning video graphics to 128mb/max. Good job though
Great 🔥🔥
thanks for watching!
very helpful
Thanks so much.
I can’t install . It only let me run the try 😢. Says install failed
I can't get it to install. how long Is it meant to take?
Same here, did you find a fix?
@@DemonTime23 I switched to hyper-v because I'm on windows and that works way better than virtual box does for me
Why is mine asking for ISO image
Su when in terminal allowed me to put in corect password
Obrigado pela ajuda!
Thank u...
thanks!
Maira menu wala option ni aa raha😢
mere installation k baad party popper ni phata🥲
please I am unable to enter my password
It doesn't shows your password in ubuntu terminal but its there just type your password and hit enter
It’s pronounced ooboontoo
It is saying aborted 😀
Ajoyib
Hi, please when I click on start I get an arrir message " not in hypervisor partition, VERR_NEM _NOT_AVAILABLE
VT-x is disabled in the BIOS for all CPU modes. What can I do
How you can back to windows from the full screen?
Very helpful
Thank you so much
no prb!