Omg my gameboy is back!! Thank you dude. It’s so great to see it functional again!! And for everyone in the comments wondering, it was pancake syrup. That’s what I get for eating eggo waffles while playing. In my defense, I was 9. Thanks again dude!!
@@sharkpetro2288 UA-cam will *_NOT_* understand, you clearly do not know how google runs youtube. Even if you apologize, the bot won't pick that up so still, all of your ads, *_GONE_*
@UCB1hl3WnyHmf0VasRNfUFTQ You had to buy it from a third party, I don't think nintendo actually sold them. There's a little jack next to the headphone jack for it.
Well, I can tell what happened with that continuity. The pressure from buttons bent the pbc and the track communicating battery got cracked. Same happens to some nes joysticks.
I'm thinking the trace just to the side of the pad got corroded and if he just scratched the PCB a little and put some solder on there it would be fixed
that goop could likely be soda syrup. I've had a kid spill soda on my controller before. also had to wait awhile for a screwdriver to come, and lo and behold, the soda turned into the goop similar to the one you saw
Imma be honest, this actually taught me quite a bit more about reading schematics than most other vids. They either teach you super simple schematics or they expect you to be able to follow along with a hyper complex one. Through watching this video, I learned a lot about how this particular schematic worked, and how everything is brought back to the negative terminal through the grounding plate. Thank you!
Opening up and replacing parts on gameboy colors is like one of my favorite things to do since everything for the most part is easy to clean and not too hard to work with, especially being that parts are still being made and they're stupid cheap.
7:13 Maybe the DC input is for when your batteries are low and you are in the middle of a fight, or otherwise can't turn it off and replace the batteries.
I used it on my gameboy pocket connected to a USB cable from my tablet to keep my Oracle of seasons cartridge powered for a couple weeks until i could get my save files pulled off the cartridge onto a PC and the battery replaced with a new cr2025 by someone who knew how to do it right and after the battery was replaced i put my save from the PC back on and it has been working fine since then on my GBA SP and the new battery should last for years before needing replacement again So that's something else it can be used for
@@HaxAras You had a power adapter that fit but provided the wrong voltage. If the LED was brighter than normal, then it was probably over 3Vdc output. Lucky you didn't burn it up.
8:38 "Dude, sex is good and all but have you ever brought a Gameboy Color back to life?" Well that explains why I can't get a girlfriend....I've never brought an old console back to life.
For some reason I legit almost cried watching the Game Boy being totally functional again 😭🙏✨ Great work!!! As a Game Boy Color owner myself, I’ve really enjoyed watching the video :DD
You beautiful magnificent bastard, being able to logically deduce the root cause of the issue and making an inexpensive workaround is truly something worth admiring.
Matt I found your channel ab two weeks ago and it has made me so happy, your channel is an excellent blend of restoration knowledge, humor and personality. I restored a wii last year and now I am hoping to find an og Xbox to restore based on your videos. Thank you for getting me through a stressful period and keep up the great work!
It's good to see that you do not give up fixing this broken gameboy. i had a similar problem with a lcd screen with a broken backlight and i could not figure it out what the problem was but i kept on track to solve this problem and finally i discovered a broken solderbridge connecting two stripes for the backlight. and after fixing this issue it worked again. great feeling ;)
UA-cam kept recommending this video to me for a while. Little did I know how full of cool stuff this channel was going to be. Amazing to see old stuff fixed up nicely. I can’t even fix the shoulder buttons on my broken PlayStation controllers 🤨
8:44 I had completely forgotten about that effect of the screen slowly clearing itself but that brought some heavy nostalgia for me oddly enough, and it reminded me of the sort of line-wipe effect when powering off a vanilla GBA.
While I wasn’t around when the Game Boy was in it’s prime, I still do enjoy getting mine out and playing it, even if it’s only for a little while. Also, it’s great to see you back at it again with UA-cam, I was in great anticipation for your next video!
i don’t know anything abt console repair or just technology in general. none of these words have meaning to me. still your videos are like laced with crack for me. i love it. cant get enough of these silly electronic things getting fixed
i mean I left my GBA SP outside for days on end, sometimes out in the sun, left it in a plastic bin for a long while... It's still alive and kicking. Though the battery wasn't as strong as it used to be. I ended up replacing it after 15 years.
I went through a faze of cleaning some of my old retro controllers which came from eBay, Facebook and assorted flea markets recently. Some of the stuff inside was truly horrid! From gloop, to what I’m pretty sure was cockroach poop, to (and I shit you not) a fingernail, which was both repulsive and intriguing. Still don’t know how it got in there.
Something I’ve done to fix trace continuity problems in the past is to scrape away solder mask until you get to some bare copper on the trace and then just make a solder bridge from the pad to the bare copper nearby
Now that powerbanks and USB cables for the Game Boy line are a thing, that DC port is actually a great way to power it without having to worry about buying new batteries.
Nice fix. Usually the easiest way to fix a corroded trace like that is to scrape the solder mask with a scalpel where the break is (hold the blade vertical and move it side to side), then just a quick solder jump or a bit of stripped wire-wrap wire to fix it. A fibreglass brush or sand eraser will also work, but are less controlled. I'd also recommend grabbing a tube of thick flux, dab a bit on anything you put a soldering iron on and watch it work its magic. If you're ever in Brisbane after lockdown, swing by the local hackerspace to say g'day.
Mechanical engineer here: You could probably have removed those screws with a pair of sturdy needle-nose pliers. Stick the plier tips in 2 of the 3 slots of the screw, then spread them to the edges. Maybe add a tiny bit of double-stick tape to the ends if you catch them slipping. JAM those pliers into the screw for max friction, and twist. I’ve opened many strange screw heads that way. Doesn’t always work but does often enough that it’s worth a try.
My boi got that jaycar analog temp-controlled mains iron and the legit goot wick. The circuit behind that iron is pretty strange, if you’d found intrigue in opening it up to take a look earlier then you’d already have a tri wing screwdriver, because that’s what the iron uses! Anyhow, nice job repairing, a badge wire is exactly what I’d have done too. I somewhat recently upgraded to a more standardised soldering station (STM32 T12 OLED) and find the different tips a huge help for soldering small stuff. I’m never using a conical tip again if I can afford it, those things only make good thermal contact on their edges which means the iron has to be on a steep angle. I use a K tip (45 degree knife edge) for THT work (less of an angle required, good thermal contact) and a D12 (1.2mm flathead) for SMT work, as it’s nice and small and the small flat at the tip makes good thermal contact along the edge of an SMT pad. Bevel tips are apparently quite good for drag soldering, if you do that a lot. That strange analog temperature control circuit only uses like 2 op-amps total for reading the thermocouple/thermistor and PWMing/TRIACing the element, and I don’t understand how.
Nice repair. I had to fix my NES by adding a wire after someone cut a line on the board and damaged another without noticing. They did repair their work, but likely had no idea about the the other. I have several Gameboys but none have needed more than a little cleaning. Some of the games needed some deeper cleaning though.
I just found your channel and I love the way you do your videos. Your voice is very soothing and I enjoy the humor, and vicariously letting me learn a new skill by watching someone who knows how to do these things lol. I rarely do, but you got an instansub from me. Look forward to being here as we watch your channel grow mate! P.S. I love the creative censorship and your fun little “Ciao” at the end. You’re doing great!
I find it funny how I cleaned one of my bad gbcs today to get it working again and when I'm resting I see this video recommended to me by UA-cam 😂 awesome restoration job.
That Pokemon game was the first ever game I played in a console, in a GBA instead of a GBC. The soundtrack brings back some very nostalgic memories for sure.
Tips for future modders, it's ideal to just desolder the speaker from the board completely and give the pcb a 99% ipa bath in a small container. I'd also advise you guys to replace the 3 capacitors on any stock gbc you may get to mod. Additional mods you can do to improve the gbc are the backlit ips(larger display but requires soldering and trimming of the shell) or tft display mod(smaller display but no additional work required as it's a drop-in mod), clean amp board(reduces power consumption for audio and produces much cleaner audio), replacement for a 6.3v capacitor for the speaker(if you hear humming/hissing after installing backlit display) and new speaker.
If I may make a recommendation if you want to regularly fix old game consoles and such. Pick up an iFixit kit. They are built really well and have all the bits for the old game consoles. Really nice thing to have around, even if it is a little pricey.
3:37 I found brown gloop in my 3DS while I repaired it. It was then my sister revealed to me that 7 years ago, when she was 4 years old, she spilled lemonade all over my 3DS and didn't tell anyone. So. It's not necessarily something that was brown at first.
Hey mate. Du you maybe have a link to the scheme you showed? I can't seem to find a decent circuit diagram for the GBC and I really neet one to fix mine. Thanks in advance! You video was great!
There's a electronic repair kit you can get at Walmart for like 8$. It comes with most security screws like the triwing. Sadly didn't come with the right size for the gameboy cart screw
![Repairing a DEAD Game Boy Pocket [Part 1]](http://i.ytimg.com/vi/qNhmapPlarw/mqdefault.jpg)
![Repairing a DEAD Game Boy Pocket [Part 1]](/img/tr.png)
Omg my gameboy is back!! Thank you dude. It’s so great to see it functional again!! And for everyone in the comments wondering, it was pancake syrup. That’s what I get for eating eggo waffles while playing. In my defense, I was 9. Thanks again dude!!
Man, when I go out, I hope it involves pancake syrup too.
"it was pancake syrup"I thought it was that or soda. I'm glad you have your GBC back
Ngl i thought it was vegemite
thought it was bbq sauce lol
How in the world did it get so covered???
i love how you censor yourself using the windows 98 error sound effect instead of using earrape bleeps
my ears cannot thank you enough
VideoGameSmash12 or the roblox oof, i like the win98 sound way more ^^
Just apologize after saying a bad word, youtube will understand, it's way better than wasting time on editing a video.
@@sharkpetro2288 youtube isnt like that. they just demonitse people for nothing
That entirely makes it better for the video and the viewer too
To be honest it sounds kinda nice
@@sharkpetro2288 UA-cam will *_NOT_* understand, you clearly do not know how google runs youtube. Even if you apologize, the bot won't pick that up so still, all of your ads, *_GONE_*
I like the part where he was fixing the gameboy.
where was that? timecode pls?
@@MattKC 0:00 - 14:06
Omg same!
I like you.
I liked the ads
I used a power cord half the time for my gbc. Mostly because my mom didn't want to buy 50 batteries a week.
yea we always used rechargable batteries but it comes down to the same I guess
Rechargeable assholes
We had a ton of rechargeable batteries, but at home it was common sense to use the cord. The batteries where for everywhere else.
@UCB1hl3WnyHmf0VasRNfUFTQ You had to buy it from a third party, I don't think nintendo actually sold them.
There's a little jack next to the headphone jack for it.
Well, I can tell what happened with that continuity. The pressure from buttons bent the pbc and the track communicating battery got cracked. Same happens to some nes joysticks.
I kept looking in the comment section to see if anyone had figured it out. Now I can rest in peace
I'm thinking the trace just to the side of the pad got corroded and if he just scratched the PCB a little and put some solder on there it would be fixed
@@ErimlRGG 100% correct. The mask looks a little funny to the left of the battery terminal pad. I would have scraped it off.
Why does NES joystick sound like an oxymoron?
so the owner pressed the buttons so hard that they cracked the traces?
that goop could likely be soda syrup. I've had a kid spill soda on my controller before. also had to wait awhile for a screwdriver to come, and lo and behold, the soda turned into the goop similar to the one you saw
It's pancake syrup! (as confirmed by the owner of the gameboy)
So he DIDN’T shit in the game boy!
@@zombibit4485 it actually a woman lol
@@dominics.4474 so a gamegirl
@@Oh_the_humanity thank you dad, very cool
3:32 I was expecting a brown bricks joke there and I'm not disappointed with what I got instead. Reminded me of an old ChipCheezum RP.
Dammit now I wish I made a brown bricks joke, where were you when I was writing this video??
qwop! tf?
The analogy to nursing a puppy is so accurate. I love seeing old electronics be salvaged and repaired. Great work Matt!
8:39 Same thing cannot be said with the s*x analogy
Imma be honest, this actually taught me quite a bit more about reading schematics than most other vids. They either teach you super simple schematics or they expect you to be able to follow along with a hyper complex one. Through watching this video, I learned a lot about how this particular schematic worked, and how everything is brought back to the negative terminal through the grounding plate. Thank you!
3:39 The censor sound effect just made this moment way funnier than it had any right being
Ikr
woah, a gameboy with all the original stickers on the back, that's a rare sight.
I found one for a buck at a yard sale with box and everything, as I ran to my house to get my dollar they gave it to me
Opening up and replacing parts on gameboy colors is like one of my favorite things to do since everything for the most part is easy to clean and not too hard to work with, especially being that parts are still being made and they're stupid cheap.
I love it when you repair and open up tech! You should do more of this kind of stuff! Great vid!
Same I enjoy watching these videos.
7:13 Maybe the DC input is for when your batteries are low and you are in the middle of a fight, or otherwise can't turn it off and replace the batteries.
I used it on my gameboy pocket connected to a USB cable from my tablet to keep my Oracle of seasons cartridge powered for a couple weeks until i could get my save files pulled off the cartridge onto a PC and the battery replaced with a new cr2025 by someone who knew how to do it right and after the battery was replaced i put my save from the PC back on and it has been working fine since then on my GBA SP and the new battery should last for years before needing replacement again
So that's something else it can be used for
"MOM, MOM GIVE ME THE CABLE I'M ABOUT TO BEAT GARY, THE BATTERIES ARE DYING HOLY SHI"
@@HaxAras You had a power adapter that fit but provided the wrong voltage. If the LED was brighter than normal, then it was probably over 3Vdc output. Lucky you didn't burn it up.
"Sex is good and all, but have you ever brought a gameboy back from the dead?"
Now he's speaking my love language.
Ayo what 🤨
@@magicdippyegg why are you bringing to 3 year old post?
8:38
"Dude, sex is good and all but have you ever brought a Gameboy Color back to life?"
Well that explains why I can't get a girlfriend....I've never brought an old console back to life.
Ive repaired a Xbox, GBC, N64, and a PS2 but I have no girlfriend! Shocking
Repair Gameboy not other consoles
@Samuel Chertoff In short, I was making a Google account and they allow me to put any name, so my immature self did the rest of the work. ;)
Ive repaired those phone toys from china
@@YoshiLikesFate lol
When you become a teenager and you can't really wake up early anymore...
This is too relatable, especially because I'm watching this at noon right after waking up.
Being an adult sucks too lol
For some reason I legit almost cried watching the Game Boy being totally functional again 😭🙏✨
Great work!!!
As a Game Boy Color owner myself, I’ve really enjoyed watching the video :DD
Yeah, Game Boys are great. I own an Advance SP handheld, the one from my childhood with a cart of Sonic Advance 3 stuck inside it.
You beautiful magnificent bastard, being able to logically deduce the root cause of the issue and making an inexpensive workaround is truly something worth admiring.
Nice Sunday upload to watch while having lunch. Thanks MattKC!
Rick....rick....rick.....
I’m Rick James bitch!!!!
looks like your friend spilled some coke in their gameboy in just the wrong spot
it was syrup lol, theres a pinned comment
wasn't there when I wrote the comment
it was baked beans
From now on when I have beef with my friend I can make the thread that I will shit in their Gameboy so it will get corrosion
idk, could be "ketchup"
Matt I found your channel ab two weeks ago and it has made me so happy, your channel is an excellent blend of restoration knowledge, humor and personality. I restored a wii last year and now I am hoping to find an og Xbox to restore based on your videos. Thank you for getting me through a stressful period and keep up the great work!
I wish your channel grows and you get the recognition you deserve. I love your content and humor. Please keep doing what you do! Cheers from Mexico.
This content relaxes me so much and I have no idea why
It's just so chill
Geart vid Matt! You should definately continue with backlit, battery and replacement housing mods. 👌
It's good to see that you do not give up fixing this broken gameboy. i had a similar problem with a lcd screen with a broken backlight and i could not figure it out what the problem was but i kept on track to solve this problem and finally i discovered a broken solderbridge connecting two stripes for the backlight. and after fixing this issue it worked again. great feeling ;)
I don’t know anything about electronics but I find stuff like this so interesting and I love how your style is really starting to shine!
UA-cam kept recommending this video to me for a while. Little did I know how full of cool stuff this channel was going to be. Amazing to see old stuff fixed up nicely. I can’t even fix the shoulder buttons on my broken PlayStation controllers 🤨
1:05 oh boy, me and the other carykh veterans know what is coming next
knee hurt
8:44
I had completely forgotten about that effect of the screen slowly clearing itself but that brought some heavy nostalgia for me oddly enough, and it reminded me of the sort of line-wipe effect when powering off a vanilla GBA.
1:35 that clip will never fail to at least make me forcefully exhale
All the demoscene music you use in your videos takes me back to the 2000s and I dig it.
That gloop looks like the residue of some kind of cola soft drink.
Look at the first comment.
While I wasn’t around when the Game Boy was in it’s prime, I still do enjoy getting mine out and playing it, even if it’s only for a little while.
Also, it’s great to see you back at it again with UA-cam, I was in great anticipation for your next video!
Every time I see a video from this channel I end up watching almost all of your videos
i don’t know anything abt console repair or just technology in general. none of these words have meaning to me. still your videos are like laced with crack for me. i love it. cant get enough of these silly electronic things getting fixed
i mean I left my GBA SP outside for days on end, sometimes out in the sun, left it in a plastic bin for a long while... It's still alive and kicking. Though the battery wasn't as strong as it used to be. I ended up replacing it after 15 years.
Following your video and the iFixit guide I was able to get the dpad working again. Just needed a bit of clean up. Thank you :)
"Sex is good and all but have you ever brought a Game Boy colour back from the dead?" New hobby right there
Aproveed by Mexs! Thanks for using my music!
I went through a faze of cleaning some of my old retro controllers which came from eBay, Facebook and assorted flea markets recently. Some of the stuff inside was truly horrid! From gloop, to what I’m pretty sure was cockroach poop, to (and I shit you not) a fingernail, which was both repulsive and intriguing. Still don’t know how it got in there.
Its always a good day when Matt uploads a video.
How to resurrect a Game Boy Colour: S O L D E R
I feel the same way about cleaning the case, those stickers looked great for whatever 'gloop' was in it hahaha
Me: reads thumbnail
Oh, just charge it
Battery: No, I don’t think I will
Something I’ve done to fix trace continuity problems in the past is to scrape away solder mask until you get to some bare copper on the trace and then just make a solder bridge from the pad to the bare copper nearby
3 months international shipping? Man, I wish I already got my tri-wing screwdriver. Anyways, nice job on the repair.
13:18 I have the same teal gameboy color, and the amount of nostalgia from the music and sight of Pokemon almost made me cry.
crude, i wanna fix my GBC!! its been dead 19years in my shoe box 😭😭😭
"Dude, sex is good and all, but have you ever bright a Game Boy Color back from the dead?" 😂😂
8:39 well, you tell me!
Ahhh ahhhh i'm getting close i..i.gonna..AHHH IT WORKS! IT WORKS!. aaahhhhh...
Now that powerbanks and USB cables for the Game Boy line are a thing, that DC port is actually a great way to power it without having to worry about buying new batteries.
The goop is probably Coke residue.
Hearing 13:21 again after a long time made me tear up a bit. Its been so long since I last heard it. Reminded me when I was still a kid.
Nice fix. Usually the easiest way to fix a corroded trace like that is to scrape the solder mask with a scalpel where the break is (hold the blade vertical and move it side to side), then just a quick solder jump or a bit of stripped wire-wrap wire to fix it. A fibreglass brush or sand eraser will also work, but are less controlled. I'd also recommend grabbing a tube of thick flux, dab a bit on anything you put a soldering iron on and watch it work its magic. If you're ever in Brisbane after lockdown, swing by the local hackerspace to say g'day.
That q-tip montage was nice,I’m still watching so much ill see what else I like.
I’ve always wanted to do this, and I’ve tried to search for how to do something like this but now I have some leads. Great Video 👍
Mechanical engineer here: You could probably have removed those screws with a pair of sturdy needle-nose pliers. Stick the plier tips in 2 of the 3 slots of the screw, then spread them to the edges. Maybe add a tiny bit of double-stick tape to the ends if you catch them slipping. JAM those pliers into the screw for max friction, and twist.
I’ve opened many strange screw heads that way. Doesn’t always work but does often enough that it’s worth a try.
how did I not see this channel before because all the other ones were just silent but this actually has personality
My boi got that jaycar analog temp-controlled mains iron and the legit goot wick. The circuit behind that iron is pretty strange, if you’d found intrigue in opening it up to take a look earlier then you’d already have a tri wing screwdriver, because that’s what the iron uses! Anyhow, nice job repairing, a badge wire is exactly what I’d have done too. I somewhat recently upgraded to a more standardised soldering station (STM32 T12 OLED) and find the different tips a huge help for soldering small stuff. I’m never using a conical tip again if I can afford it, those things only make good thermal contact on their edges which means the iron has to be on a steep angle. I use a K tip (45 degree knife edge) for THT work (less of an angle required, good thermal contact) and a D12 (1.2mm flathead) for SMT work, as it’s nice and small and the small flat at the tip makes good thermal contact along the edge of an SMT pad. Bevel tips are apparently quite good for drag soldering, if you do that a lot.
That strange analog temperature control circuit only uses like 2 op-amps total for reading the thermocouple/thermistor and PWMing/TRIACing the element, and I don’t understand how.
Matt when the traces are broken: fine, I'll do it myself
Nice repair. I had to fix my NES by adding a wire after someone cut a line on the board and damaged another without noticing. They did repair their work, but likely had no idea about the the other. I have several Gameboys but none have needed more than a little cleaning. Some of the games needed some deeper cleaning though.
You're a better electrician then any of the people working at my local UBreakFix or Geek Squad, and I applaud that
The intro was a major mood.
Finally back! We need MORE videos! I'd do patron or something if I could get more videos from you!
Matt you got to make more videos. Your content is very unique with very good commentary.
I love watching people clean and repair old hardware.
I just found your channel and I love the way you do your videos. Your voice is very soothing and I enjoy the humor, and vicariously letting me learn a new skill by watching someone who knows how to do these things lol. I rarely do, but you got an instansub from me. Look forward to being here as we watch your channel grow mate!
P.S. I love the creative censorship and your fun little “Ciao” at the end. You’re doing great!
I find it funny how I cleaned one of my bad gbcs today to get it working again and when I'm resting I see this video recommended to me by UA-cam 😂 awesome restoration job.
That "Ciao" was so wholesome sgjsjsjstjjsgj
I have zero knowledge about electronics and yet I find this pretty entertaining.
This is like the tech version of those addicting painting-restoration videos
Nice use of the messenger soundtrack. Love it 😍
That Pokemon game was the first ever game I played in a console, in a GBA instead of a GBC. The soundtrack brings back some very nostalgic memories for sure.
“Hopefully my friend didn’t shit in his gameboy”
Would've loved to see a closeup of the wire between the terminal to EM7!
One look at the gloop on the metal plate on the back and I have a pretty good idea what it is: syrupy dried cola.
YEEEEAH ANOTHER MATTKC VIDEO! LET’S GOOOO!
don’t worry, I left a like, per usual!
@@callaco3176 ok boomer
Polifeet no u
Nice vid!
I used to use qtips but now i just squirt isopropyl all over the board and go to town with a toothbrush. So much faster
This and many other videos about Gameboy repair inspired me to fix a dead Gameboy color I bought.
Amazing repair job mate.
Gameboy: I WAS IN HEAVEN WHY DID YOU BRING ME BACK TO THIS SUFFRAGE?!
Gotta admit, repairing old gameboys is indeed quite sexy.
There's definitely sermon material here, for the hardware-inclined preacher.
matt kleanup crew is like the new cary key hole jokes
i have no idea what’s going on here but man is it entertaining
Tips for future modders, it's ideal to just desolder the speaker from the board completely and give the pcb a 99% ipa bath in a small container. I'd also advise you guys to replace the 3 capacitors on any stock gbc you may get to mod. Additional mods you can do to improve the gbc are the backlit ips(larger display but requires soldering and trimming of the shell) or tft display mod(smaller display but no additional work required as it's a drop-in mod), clean amp board(reduces power consumption for audio and produces much cleaner audio), replacement for a 6.3v capacitor for the speaker(if you hear humming/hissing after installing backlit display) and new speaker.
If I may make a recommendation if you want to regularly fix old game consoles and such. Pick up an iFixit kit. They are built really well and have all the bits for the old game consoles. Really nice thing to have around, even if it is a little pricey.
MattKC is the 5 minute crafts of the tech world.
But they actually work.
as soon as he said warm soapy bath I started getting ready to take a bath and i wish i was joking
3:37 I found brown gloop in my 3DS while I repaired it. It was then my sister revealed to me that 7 years ago, when she was 4 years old, she spilled lemonade all over my 3DS and didn't tell anyone. So. It's not necessarily something that was brown at first.
And I thought that getting pancake syrup in your hair was bad enough. Never knew how dangerous pancake syrup is.
Hey mate. Du you maybe have a link to the scheme you showed? I can't seem to find a decent circuit diagram for the GBC and I really neet one to fix mine. Thanks in advance! You video was great!
I feel as though I could trust MattKC to restore any old electronics that weren't fried.
Rad respect for this guy. This video alone made me subscribe.
aren’t triwing screws just in normal screwdriver kits though lol
One bad gloop and she do what I yoinky--I mean, breaks my Game Boy Color and makes MattKC repair it
that fuck it was the most refreshing act of not giving a shit i've ever seen
There's a electronic repair kit you can get at Walmart for like 8$. It comes with most security screws like the triwing. Sadly didn't come with the right size for the gameboy cart screw
You should consider getting an Ifixit Mako driver kit, it comes with essentially all the bits you'll ever need for electronics repair.