UPOL Raptor Liner bed liner Garage Work bench coating
Вставка
- Опубліковано 5 вер 2024
- In this video we show you our project bench top utilizing Raptor Liner to coat the top and create a great work surface that is resistant to oil, fuels, and other chemicals you might work with in your shop or garage.
Thanks for all the support!
Follow us as we have more content and mods COMING SOON!
Please Hit the Like button and Subscribe if you haven’t already and leave us some feedback down below. Also, hit the bell next to Subscribe to turn on notifications so you don’t miss new upcoming videos!
Disclaimer All information provided by MKS Performance & Offroad in this video is furnished for educational and informational purposes only. MKS Performance & Offroad does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the Video Content. MKS Performance & Offroad does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any Video Content.
The Video Content is not intended to be a substitute for professional mechanic advice, diagnosis, or repair. Never disregard professional mechanic advice or delay in seeking it because of something you have read or seen on our channel.
MKS Performance & Offroad hereby disclaims any and all liability to any party for any direct, indirect, implied, punitive, special, incidental or other consequential damages arising directly or indirectly from any use of the Video Content, which is provided as is, and without warranties.
Products used in this video can be found here:
- Raptor Liner Black 4L kit with shutz spray gun amzn.to/32fSWWe
- Tintable Raptor Liner amzn.to/34pR1AT
- Raptor Liner White 4L kit amzn.to/2Qn8GAZ
I work with an authorized AMSOIL Dealer for all my lubricant needs. When you purchase AMSOIL products from Jason, you're helping the channel at the same time! Give Jason a call and he can help you get the products you need, just mention you were referred to him by this channel.
Jason- 440-731-6607
SAVE $$$ Become an AMSOIL Preferred Customer! For details, click here: www.amsoil.com...
Need something on Amazon? Please use our affiliate link:
amzn.to/3l7STV5
See our links provided below on products we have used.
STAY CONNECTED! Follow us on:
Instagram: @mksperformanceandoffroad
My Mod List:
-Fuel D588 20X10 Wheels
-Cooper AT3 XLT 35X12.50R20
-Raceme Ultra Programmer
-Isspro R30000 Factory match Back pressure gauge
-Katzkin Leather seat covers
-Weathertech floor mats : amzn.to/2YYvLvR
- Husky Floor Mats : amzn.to/2KL86Kn
-K&N drop in Air Filter : amzn.to/2N0DAPv
-K&N Filter Cleaning Kit : amzn.to/2Z26CnW
-Autometer A-Pillar dual gauge pod : amzn.to/2Z3t8ZX
-Alfaobd programming factory features
-KAOD Tech Security Gateway Module Bypass Harness
-Spray in Bedliner
-RAM Cargo LED Bed lights : amzn.to/2KMnXIK
-Bilstein 2.3” Level Kit with 5100 series shocks for diesel : amzn.to/2YG1W81
-Obdlink MX+ : amzn.to/2H3Xt46
-Black Cummins Turbo Diesel Badge : amzn.to/2Zxwa8E
-South Bend Dual Disc 3250GK clutch kit
My Vlogging Gear (Affiliate Links):
Cameras
1. Iphone 11 Pro
2. Nikon D3200 amzn.to/2LA1ErD
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the channel & allows us to continue to make more videos like this. Thank you for your support!
i'm a pro carpenter been in business 33 years, in saying this..anyone using bedliner on wood it has way better results applying 2 coats of rolled on zinser bullseye primmer first..1st coat after dry sand it with 120 grit sand paper disc then recoat after the 2nd coat is dry sand it with 220 grit, now bedliner in 2 coats. comes out professional C.DaleGibbs
Absolutely agree, this was a quick test for a workbench with no prep what so ever. Happy with the results for what Im doing.
nice tip… planning on using raptor in my campervan garage area on top of 12mm ply board 👍🏻
@@seanguild6528 have fun, wear gloves cause every time i paint my face itches somewhere and you know you just have to scratch..
Do you have any recommendations on applying it to melamine on plywood? Thanks in advance.
Do you think I should use that primer on my wood decking on my trailer? I get my raptor liner tomorrow.
UA-cam Challenge! Looking good In the neighborhood. Big trucks and lots of Bucks Exclusive video training your way UA-cam I’m here to stay. S.O.S.M. 👍🏼🚘🚚
Would like to see a follow up report on how it’s holding up
We have since sold this home so I couldnt tell you how it is still holding up but as of last year it was doing great
I just made a set of concrete 45lb weights going to put a few coats of this on them to hopefully protect them from chipping hope it sticks well to cement
Raptor sticks extremely well to fresh clean concrete. No primer required.
@@anthonyjames7100
What about an old concrete, and what primer would you use for it, also how does the raptor do against oil, diesel, gas, etc.?
Thinking about spraying my garage concrete floor?
I was thinking of doing something similar to my wooden shed floor because of winter time use,but was afraid if it would cause my wood to rote from underneath. Because it is setting on a thick gravel pad not cement. Looks really good on your work bench
Marshall Rugg it has held up so awesome over the last few months, we sprayed this about 6 months ago but I will be spraying our enclosed trailer floor and we did spray the front and back of our camper fiberglass with the white also. That video will be coming soon. Is your plywood treated and or sitting off the ground like on skids?
@@MKSPerformanceOffroad it is a pre built shed 14x30 foot. It has some kind of coating on it but it is light in color and shows all kinds of marks and I am afraid of water and oil getting in from the top but also afraid that if I seal up the top the bottom might rote.
Marshall Rugg if its a shed built by a company I dont think you would have an issue. I was going to do the same to my 8x12 shed as well but it sits pretty high with alot of airflow underneath. You might check with the company that built it to find out what they used. It should be treated.
@@MKSPerformanceOffroad ok i will do that thank you
I thought about doing this on a set of outdoor stairs for my grandparents, not sure if it would be slip resistant enough tho 😬
You can change the texture with application pressure and how you spray it. I thought there might be a slip resistant additive I saw a while back as well.
Still holding up I want to do the same thing but is it cracking or flaking
So you didn’t have to prime it with anything ?I have a wood deck for a trailer I was going to roll it on.
No sir, you can prime it if you want but I fid my bench top and enclosed trailer and it has held up great.
How did it hold up on the plywood? Did it stick good to the plywood?
Work extremely well, even sprayed the white on the floor of our trailer.
How has it held up 1 year later on the wood? Has it peeled off? Anything you would do differently ?
It is doing great, no peeling at all and I have used the bench alot. I would spray another coat or 2 on it for thicker layer but other than that nothing else.
Do you think this would help protect a door with a small dog scratching it from time to time?
Yes, as long as surface prep is good and you spray it thick enough.
Hi nice job, bench looks great! Is the raptor ok to use straight on the ply?
Yes, the surface is porous and rough enough that the raptor should adhere without issue. I haven’t had any issues thus far and I use my bench regularly.
@@MKSPerformanceOffroad thank you mate.
two years later; how did it hold up?
Its good, I have had zero issues and use it daily. Makes a great work bench coating.
@@MKSPerformanceOffroad thats really useful feedback, thanks!
No primer?
Didnt need it. The wood was pretty rough to begin with. You could primer it if you like.
Ummm. Uhhh. Ummm. It’s honestly hard to get past all the stammering bud. Appreciate the video but those buzz words were killer.
Everyone starts somewhere, appreciate the feedback.