You deserve it. That's literally THE coolest rv on the planet. I love the look of it, mainly the front end. Then you dropped a turbo ls in it . That is just awesome Dane. You couldn't have picked a cooler rv to do that to.
Go back to the video of when I bought it and let me know. The front end is completely different and custom. I was inspired by the Ring brothers and by Fuel injection sucks. Both also have killer Winnebagos. I just put my flair on mine😁. Glad you enjoy it as much as me.
I’m several videos behind because work is crazy and trying to fit in time for my projects. I’m on nights at work for a few days so now I can watch my Burndown marathon.😂
One of the main things I like to push on my channel is to get out and do what you can with what you have. If you go back to my really early stuff you'll see the Boom and Bego started out life as normal junk like anyone would get. I LS swapped the Boom for 500$ and ran a 16 second pass my first time out with it. We are going a bit faster now but I still put the effort in and hope it inspires the regular guy to get out and chase his car dream. Thats what im doing! Thank you !
Did you see I made it on 1320! J would be so proud man! I always told him I was gonna do cool stuff one day and he was one of the only people that believed me when I had noting but a dream. Hope your doing well bro and if you ever need anything you know how to get at me. Love you dude!
@@Burndown I was right there with him! i just didnt know how to communicate it... Hell- i didnt even know all you had was a dream XD i though you had it dialed the whole time!
Good job on the 1320 video. The only question is that the sweep of the sender might be different in the tank if it hits the top or bottom of the tank before the sweep of the sender is at full range of motion
Well ill sink it and make sure it says zero. I know that part was close just wasn't sure if the gauge reflected that but you have a good point. Thanks man.
after several years and hundreds of videos yes it starts to pay off . Honestly I could probably just quit UA-cam today and feel like I accomplished something cool at this point! Its like everything worth doing in life. You have to stick it out long enough to see it through before it gets good at all. Thank you for watching and commenting on my videos!
I looked a bit on the inter webz but the plastic float was only a few dollars so im gonna roll with it for now. If it melts or does something silly then ill bite the bullet and buy a brass floater. Thank you for the part number!
Welcome! Lots of new people here. I have lots of content and am a DIY guy and do most everything myself and try to keep you guys motivated to work on your own stuff as well! If you have questions on anything feel free to ask in the comments and ill get back to you!
Thank you Ruth! I have a video coming out tomorrow where I tell the story of how it went for me. I waited till they dropped the video to say anything about it but now that is out I want to tell you guys all about it!
Work at least enough that I know I should put fuel in. I used to just wait till it was low and the motor would stumble when I hit the brakes from fuel slosh so this is a step up from those days.
What time are we dropping videos next week again? Im gonna start the new Fun Fun schedule next week but I already forgot what your recommenced and I'm too lazy to go back through all my comments right now 😆
That Apache looks about as rough as this 68 International I'm restoring! Customer brought it over from another guy that sanded it all down, then let it sit outside for over a year! SMH
Everyone that brings me stuff must find these cars and trucks on the bottom of lakes and rivers or something 😆. I think I like rust repair the least out of all the steps that go into building a car. I would rather sand things flat till my fingers bleed every day I think.
@@funfun8095 Yeah I agree. The worst is damage and rust on the same panel. Put those two together and a guy can't sleep at night without having nightmares. 🤣
I’m several videos behind because work is crazy and trying to fit in time for my projects. I’m on nights at work for a few days so now I can watch my Burndown marathon.😂
Glad that 1320 featured the Bego, I've noticed a lot of positive feedback from it! You deserve it brother.
I appreciate it!
You deserve it. That's literally THE coolest rv on the planet. I love the look of it, mainly the front end. Then you dropped a turbo ls in it . That is just awesome Dane. You couldn't have picked a cooler rv to do that to.
Go back to the video of when I bought it and let me know. The front end is completely different and custom. I was inspired by the Ring brothers and by Fuel injection sucks. Both also have killer Winnebagos. I just put my flair on mine😁. Glad you enjoy it as much as me.
@@Burndown ah I didn't realize it had a different/ custom front end on it. In my opinion you did it right.
I’m several videos behind because work is crazy and trying to fit in time for my projects. I’m on nights at work for a few days so now I can watch my Burndown marathon.😂
🙌
Well done Dane , I love the hot rodder next door vibe you put out . Thanks
One of the main things I like to push on my channel is to get out and do what you can with what you have. If you go back to my really early stuff you'll see the Boom and Bego started out life as normal junk like anyone would get. I LS swapped the Boom for 500$ and ran a 16 second pass my first time out with it. We are going a bit faster now but I still put the effort in and hope it inspires the regular guy to get out and chase his car dream. Thats what im doing! Thank you !
Watching these make me so happy dude. Love you buddy
Did you see I made it on 1320! J would be so proud man! I always told him I was gonna do cool stuff one day and he was one of the only people that believed me when I had noting but a dream. Hope your doing well bro and if you ever need anything you know how to get at me. Love you dude!
@@Burndown I was right there with him! i just didnt know how to communicate it... Hell- i didnt even know all you had was a dream XD i though you had it dialed the whole time!
Congratulations on being #2 on the list. Hopefully the float will survive .
I said nice things to it so im sure it will be fine. Thank you for following along and supporting Phil! Your awesome man!
Good job on the 1320 video. The only question is that the sweep of the sender might be different in the tank if it hits the top or bottom of the tank before the sweep of the sender is at full range of motion
Well ill sink it and make sure it says zero. I know that part was close just wasn't sure if the gauge reflected that but you have a good point. Thanks man.
Congrats Dane, hard work.......well you know!
after several years and hundreds of videos yes it starts to pay off . Honestly I could probably just quit UA-cam today and feel like I accomplished something cool at this point! Its like everything worth doing in life. You have to stick it out long enough to see it through before it gets good at all. Thank you for watching and commenting on my videos!
Ford used a nice round brass float, part # C0AZ,9202,A they used it for many years and might be what you are looking for.
I looked a bit on the inter webz but the plastic float was only a few dollars so im gonna roll with it for now. If it melts or does something silly then ill bite the bullet and buy a brass floater. Thank you for the part number!
New to the channel after the 1320 video and love it bruda
Welcome! Lots of new people here. I have lots of content and am a DIY guy and do most everything myself and try to keep you guys motivated to work on your own stuff as well! If you have questions on anything feel free to ask in the comments and ill get back to you!
Well better than using a dipping stick. Probably should calibrate it inside the tank with and with out fuel.
Ill just push it down and make sure it goes to zero. Im not too concerned if its full or full full. Its the running out that's the problem. 😆
congrats on the 1320 video!!
Thank you Ruth! I have a video coming out tomorrow where I tell the story of how it went for me. I waited till they dropped the video to say anything about it but now that is out I want to tell you guys all about it!
there is nothing like having that gas gauge work lol
Work at least enough that I know I should put fuel in. I used to just wait till it was low and the motor would stumble when I hit the brakes from fuel slosh so this is a step up from those days.
Tienes la bomba de gasolina sumergida en la Fuel cell o externa?
Can you spell it in English?
👋
What time are we dropping videos next week again? Im gonna start the new Fun Fun schedule next week but I already forgot what your recommenced and I'm too lazy to go back through all my comments right now 😆
@@Burndown I'd say, do it at 11pm EST, 8pm your time. I'm curious to see if you get more hits.
That Apache looks about as rough as this 68 International I'm restoring! Customer brought it over from another guy that sanded it all down, then let it sit outside for over a year! SMH
Everyone that brings me stuff must find these cars and trucks on the bottom of lakes and rivers or something 😆. I think I like rust repair the least out of all the steps that go into building a car. I would rather sand things flat till my fingers bleed every day I think.
@@Burndown At least you don't have the snow and salt that we have here. Creates a lot more rust! Sucks!
@@funfun8095 Yeah I agree. The worst is damage and rust on the same panel. Put those two together and a guy can't sleep at night without having nightmares. 🤣
I’m several videos behind because work is crazy and trying to fit in time for my projects. I’m on nights at work for a few days so now I can watch my Burndown marathon.😂
Binge watching BurnDown! I like it.