Yes I learned about a low fuel tank with a CRX, it would turn off everytime I hit the brakes, another weird thing about my CRX is when I'm pumping gas, if I pump too fast it will click like it's full after 30 cents so I had to pump slow, I heard from a few other people that their EFs do the same thing...
Get you some fuel cell foam and cram that stuff in there it'll help with fuel pick up and fuel slosh. Or if you pack it tight enough you wont need the hanger
Always loved ur videos. But it's honestly been a while since I've seen a video. You've improved your camera presence so much. It's dope to see. Not to say it was ever bad, just good to see your continuing improvement
the pump position inside the cell is looking MINT, BUT if you wanted to get it even lower you could just make your own bracket/leg to bolt to the pump hanger.
Dude how are you releasing these videos so quick snappin them out there I just started looking at your channel and mad respect for the bone thugs and harmony beanie my nephews dad ran with a few of them they even had his dog bizzy in a few videos a big ass pit bull he just passed not that long ago that was a dawg
I’ve been watching you for sometimes and I’m a faithful follower, I’m replacing my main+rod bearings on my b18c1 what would the part #’s be for those bearings all the way around along with the manufacturer to buy from? Please, in need of your help.
Unless you got your Crank/Rods Machined, you’re going to be using Standard Bearings. Go to bearings are normally King or ACL. Matter of Preference really. All B-Series bearings should be Compatible. Also be sure to Measure Clearances with PlastiGauge. Best of Luck. 👌🏻
@@mikefleeezy526 scenarios named, I made a dry pull and shredded oil pump along with twisting key, keyway sheared, and dropped oil pan to pull a bearing my engine guy who works at victory precision in Winchester VA mentioned new bearings could fix it since the motor could not have more than 1,000 miles on it MAYBE!!!(had it for 2 months after being freshly built top+bottom, ACL Oil pumps I’m told are junk) and basically he said dry run oil through it without plugs or injectors hooked up and just sport new bearings, thoughts?
I bought my PTFE hose from Radium. 8 deliver and 6 return. Friggen lines were $450 dollars! I looked for the gold plating lining in the hose but none was to be found 😆 🤣 😂 Howcdid you get all the aluminum shaving out of the tank after modifications?
Damn that's bad ass Dana.
the welder friend did amazing
She’s coming together I miss my H2B
Watching your videos makes me miss my crx
Wow, great job Dana... nice step bye step video...You Rock bro...
Yes I learned about a low fuel tank with a CRX, it would turn off everytime I hit the brakes, another weird thing about my CRX is when I'm pumping gas, if I pump too fast it will click like it's full after 30 cents so I had to pump slow, I heard from a few other people that their EFs do the same thing...
Keep up the good work Dana!!!!
Great idea and well done finish product!
Happy new years bro!
Get you some fuel cell foam and cram that stuff in there it'll help with fuel pick up and fuel slosh. Or if you pack it tight enough you wont need the hanger
So much passion and hard work dedicated! Missing my old crx. Good content
Love ur work! And vids. I just moved 2 hours from ya. I never been to the bay lol .
Dope fuel cell, you guys make a good team
Always loved ur videos. But it's honestly been a while since I've seen a video. You've improved your camera presence so much. It's dope to see. Not to say it was ever bad, just good to see your continuing improvement
the pump position inside the cell is looking MINT, BUT if you wanted to get it even lower you could just make your own bracket/leg to bolt to the pump hanger.
Dude just passed by 101 and Santa Clara where it bends and there’s the dog park off the freeway.. red crx with the green tow sticker on it!
Thanks for taking such good care of my CRX, can't wait to take it home 🤘🏼
Dude how are you releasing these videos so quick snappin them out there I just started looking at your channel and mad respect for the bone thugs and harmony beanie my nephews dad ran with a few of them they even had his dog bizzy in a few videos a big ass pit bull he just passed not that long ago that was a dawg
I think Static works out of his home, I think? He has a lot of time to make multiple videos.
Hell Yeah Brother 🇺🇸🦅
Is that you Cleetus?!
I’ve been watching you for sometimes and I’m a faithful follower, I’m replacing my main+rod bearings on my b18c1 what would the part #’s be for those bearings all the way around along with the manufacturer to buy from? Please, in need of your help.
Unless you got your Crank/Rods Machined, you’re going to be using Standard Bearings. Go to bearings are normally King or ACL. Matter of Preference really. All B-Series bearings should be Compatible. Also be sure to Measure Clearances with PlastiGauge. Best of Luck. 👌🏻
@@mikefleeezy526 scenarios named, I made a dry pull and shredded oil pump along with twisting key, keyway sheared, and dropped oil pan to pull a bearing my engine guy who works at victory precision in Winchester VA mentioned new bearings could fix it since the motor could not have more than 1,000 miles on it MAYBE!!!(had it for 2 months after being freshly built top+bottom, ACL Oil pumps I’m told are junk) and basically he said dry run oil through it without plugs or injectors hooked up and just sport new bearings, thoughts?
Thank you for your content love what you do
Damn I hate when I show up to a store and there closed... the struggle is real sometimes smh
You can run a oe replacement filter it would sit lower down in the tank or look up a Fuel Mat like a "floor mat" but its called a Fuel mat lol
Yoo, it was cool to finally meet you at Racewarz. hope I win.
I bought my PTFE hose from Radium. 8 deliver and 6 return. Friggen lines were $450 dollars! I looked for the gold plating lining in the hose but none was to be found 😆 🤣 😂 Howcdid you get all the aluminum shaving out of the tank after modifications?
Hey bro I have a question where do u get the paint for trim I been looking for it n can't find it can u pls let me know Gracias
With todays gas prices we all savage
Yo is there any way to contact you about some fuel wiring issue?
TruHart components? Is this for one of the CRX's? I use a few of there parts on my DC5 and I get roasted all the time lol
How do you enter the giveaway
How can I get hold of you?
what the heck time do those stores close out in Cali its still daylight out side they close at 10;oo pm here in Pittsburgh
Cali is effed up state. Lol. Alot of looting and criminals getting away or slap on wrist. So the stores close early. 😣😣
@@jimxiong04 That and it was Easter Sunday. Everything was closed anyway.
damn i need a fuel cell like that on my eg.. what's the link to get it?
Let's gooo!!!!
Has dana ever talked about wanting to have his keloid removed? I’d donate to help if he does
Why don’t you try to rig up a tube to fill from stock location
🤙🏾
Why not just buy a fuel tank seal on line not like need it done tomorrow