Installing downpipes on M6 or M5 and twin turbo V8's
Вставка
- Опубліковано 10 гру 2019
- This install applies to f13, f12, f06, f10 and should be similar to s63 and N63 engine cars.
Thanks to 540iAddicted
/ 540iadicted
Website: www.PremiumFuelMag.com
Please follow us on Instagram @premiumFuelMag
Check out our drift build on Instagram @PFM_Drift_Fox
Hit us up on Facebook: / premiumfuel - Авто та транспорт
Really good video ! Thank you for making the effort to record it for us .
I can't believe you did us dirty with that last second! You Monster!
Don't worry, it's coming soon
Wow, this looks so much easier of an install than it was on our F15 X5.
So little videos on these cars ir sucks so appreciate u more than u could imagine, new to this but 2015 bmw m5 being modded now
I just want to say thank you. I couldn’t understand how to unplug the o2 sensors. Such a clear guide! Thank you 🙏
Glad it helped out.
@@Sgt.Slides It really did. Subscribed 👍 more guides please!
Thanks for posting, Semper Fi
Bro u a BEAST!!!
He is a beast
greetings from Mexico
Eww
Wish he mentioned how fragile the pcv lines are, snapped mine with such little force and effort
A nice way around the heatshield problem is a turbo blanket. I am toying with swapping in these pipes on my F10 M5. It does not seem like such a bad job, a shame I did not think to do it when I did my turbo blanket, I was half way there. LOL!!
I have been told that those charcoal filters in the airboxes are to "eliminate" fuel vapor escaping from the intake system. EPA stuff perhaps...
Hi, great video! Did you have any troubble with hearing some "wastegate rattle noise" after the dp installation? I have seen that many does get the noise after replacing the OEM DPs for catless dps.
none at all. probably due to people not installing the 2 rear brackets back.
Premium Fuel Mag bracket has nothing to do with waste gate rattle , it’s flaps inside the turbo I have a 2015 M6 GC Fabworx downpipes, and Full Meistershaft exhaust , I had no wastegate rattle with stock pipes but the GThaus exhaust is 3-1/2 pipe it’s more free flowing now I have it pretty bad it sounds like a rattle snake every time I come to a stop , it doesn’t bother me but it would be nice if it wasn’t there , my Tuner says leave it alone it’s normal
Lol at the end
lol, exhaust sound vid coming soon, plus the vid was getting too long.
They sound different because the headers are mixed as much as possible. Each cylinder bank mixes with the other cylinder bank before hitting the turbos, creating a sort of triple x pipe BEFORE the turbos. Same setup as the Agera, that’s why they say they sound the same.
These banked manifolds are a direct bolt on to the n63tu3 motors and to n63tu3 turbos too ( b8 alpina setup). I wonder how that will work if just swapping in.
Where did u get thr down pipes bro
Fam is the process similar u think for a biturbo Benz? I don’t see any videos online for benzes v8 biturbos
the motor configuration is the same, but I can't really speak for the details, and the details matter a lot.
hey! my name is Grant, I work for Pure Turbos in Oceanside,CA and just put our f13 m6 back to stock and cant seem to find the back downpipe bracket with the studs on it. do you by chance still have them? id love to buy them off of you if so!! let me know!!
Wow, awesome that folks from Pure are watching my vids! Sorry but I only used those brackets. I had to take them off to get the pipes out, then put them back in for the new pipes.
Premium Fuel Mag no worries! That’s the right way to do it! One of our techs seemed to miss place them lol keep up the work man!! When your ready for a turbo, hit me up grant@pureturbos.com
My shop tried installing the rvg dp on the m850 but the Brackets don't fit well. The top Brackets right next to the turbos fit well but the bottom Brackets are off. One side of inches away. On the other tabs, only 1 of the 2 bolts fit. How much of an issue will not having all bolts installed in the brackets?
You need to have everything bolted down, otherwise they could blow apart.
😒🙁😑😑👈🏾 my face at the ending 😂
I was hoping to have an exhaust sound vid up much sooner lol, sorry to do that to you guys.
Damn dude wheres the damn downpipe sound! I need it asap 😭😭😭
so I did a before and after video. The before footage got lost and deleted, so I want to video a few more pulls to get some good sound bytes since I can't do a comparison. Im super frustrated about loosing that footage.
@@Sgt.Slides just post it up or send to me on IG pls. @hangrym6
hey, why not just to cut out cats from stock pipes and just put them back in?
that would be the cheapest option, and the best way to avoid fitment issues that can sometimes occur when you use cheap aftermarket downpipes, but destroying the factory cats can be costly if you ever need to put them back on for emissions or to sell the car, it can cost over $1000 to get another set of used ones.
Great video but next time slow down on sudden moves of the camera. Makes people dizzy
The purpose for replacing this is that they generate less heat?
Are these more efficient as well
Please explain
Thankyou
I have a gt550i twin turbo
they flow better, let the turbo spool faster, and yes more efficient.
Did u ceramic coat your downpipe before wrapping it with titanium wraps?
Yes i did
@@Sgt.Slides I figured, going to powder coat mine too before wrapping
@@ArmedTheAsians Would powder coat hold up to exhaust temperatures? I don't think it will.
Downpipes are one of the hottest parts of your engine
@@Sgt.Slides I mean ceramic coating* sorry about that
No more mustang?
Stang is still here. Gearing up to do more mods to it.
Awesome. I been away from the internet a bit.
Can seem to get occ off
Pcv
@@SloSedan pretty much just squeeze the ring together where the ridges are, and you can see where the clips catch, also make sure you are pulling from the right spot.
Wow wtf was that no sound after install 👎🏻
I recorded a few sound clips afterwards but they sucked due to background nois and other stupid stuff, and eventually i gave up on it.