This was the first video that came up when I searched and it saved a trip to the service centre coz I blew the horn and brake light fuse whilst changing the horn! Thank you so much for this video!
Thanks so much. This is right as UA-cam is about to demonetize me yet again for their arbitrary watch time requirements. When they do, the content will be going with me...
I'm totally unsure about the ZX10... Best of luck finding it on that. Camera was pointed at it - some of the shake reduction has weird effects. I typically don't spend the time to fine tune it.
Right side seat cowl according to there. I unfortunately haven't ridden one, so I'm not 100% sure. Adding site I found this to video description momentarily.
Nah, I applied the google stabilization and it screwed it up. I'll see if I have the orig and I'll upload it again. Thanks for mentioning it, as I never checked it after the stabilization filter was applied.
yea ty for that just blow my fuse when i installed the number plate holder was looking for 2 hours called 4 motorbike shops none of then knew where so again ty for these
Headlights ain’t working daytime or highbeam all other lights work, checked the fuse box for the headlight and it was blown, replaced it with another 15 fuse and still nothing. Any ideas? I did do a continuity test and even touched each headlight bulb and they light up fine it seams. Helppp
@@JxKILLAA with bike running, put one probe of volt meter on the positive battery post, now probe at the headlights, you should get >12V. If you don't, there is a ground missing to the headlight. Then do the same with the negative post using the probe on the headlight. One or the other won't be present, assuming the light bulb isn't somehow internally screwed... Do the high beams work?
@@TheWizechatmgr okay I’ll give it a try, no headlight or passing button don’t work either l, when I flip the light switch not getting any indication on the dash either
This was the first video that came up when I searched and it saved a trip to the service centre coz I blew the horn and brake light fuse whilst changing the horn! Thank you so much for this video!
Glad it helped, most of the time I just receive snark from people that don't make videos. =)
Even though you uploaded this almost 10 years ago it just saved my ass. Thanks for the upload
Thanks so much. This is right as UA-cam is about to demonetize me yet again for their arbitrary watch time requirements. When they do, the content will be going with me...
I'm glad this was helpful for you. If you have any requests, just let me know.
Thanks for showing this. I was having a hard time finding my fuse box too.
Tq bro...
Glad it helped
I'm totally unsure about the ZX10... Best of luck finding it on that.
Camera was pointed at it - some of the shake reduction has weird effects. I typically don't spend the time to fine tune it.
Right side seat cowl according to there. I unfortunately haven't ridden one, so I'm not 100% sure. Adding site I found this to video description momentarily.
thanks man, it definatly helped me
Glad it helped =)
Thank you. This was exactly what I needed
Glad it helped!
Useful video was wondering what I was pulling out now imma try to get some wires on the relay box
ic ilejay Glad to hear it :)
for bonus points. do you know where your flasher relay is?
Under the cowl on the "driver's"/left side.
Nah, I applied the google stabilization and it screwed it up. I'll see if I have the orig and I'll upload it again. Thanks for mentioning it, as I never checked it after the stabilization filter was applied.
yea ty for that just blow my fuse when i installed the number plate holder was looking for 2 hours called 4 motorbike shops none of then knew where so again ty for these
Really helpful! Thank you:)
Glad it was helpful!
Thanks, helped me replace my blown signal fuse :)
gotta take mine off tomorrow again because my horn went out, hope its just a fuse
How did you make out with that? Flaky switch maybe?
yeah I have no idea lol
Might be reshooting this in a few minutes. This way we won't have 3/4 of the video pointed at the fairing :)
Headlights ain’t working daytime or highbeam all other lights work, checked the fuse box for the headlight and it was blown, replaced it with another 15 fuse and still nothing. Any ideas?
I did do a continuity test and even touched each headlight bulb and they light up fine it seams. Helppp
Check the ground to them...
@@TheWizechatmgr how do i go about that exactly lol still learning
@@JxKILLAA with bike running, put one probe of volt meter on the positive battery post, now probe at the headlights, you should get >12V. If you don't, there is a ground missing to the headlight. Then do the same with the negative post using the probe on the headlight. One or the other won't be present, assuming the light bulb isn't somehow internally screwed... Do the high beams work?
@@TheWizechatmgr okay I’ll give it a try, no headlight or passing button don’t work either l, when I flip the light switch not getting any indication on the dash either
Video may be redone Saturday or Sunday (been moving) so there is less fairing and more fuse box shown :)
Great
Didn’t not see anything you talking camera with pointed down
Everyone else saw it. You sure it isn't being clipped on your device? I just checked and the video is fine here.
So it turns out I don't have the orig video. I'll re-shoot this.
Glad it helped.
thanks
anytime :)
over 3/4 of the video is pointed at the fairing instead of at the fuses...talk about "too fuckin lazy"
And yet you must have found the fuses! =)