I've Raptor lined all my armor and tub and trust me when I tell you...spend the extra $50 on the Upol vari-nozzle gun. The end result is night and day. You can adjust the texture for a consistent finish from micro fine to coarse and won't clog up and spit blobs of liner like the gun the kit comes with. Plus, adhesion promoter for all the tight nooks and crannies. Lastly, don't spray till the bottles empty. The residuals on the bottom of the bottle always gets clumpy.
PB Machines don’t get me wrong, I’m not saying you can’t get good results with the regular gun but once you try the pro gun you’ll kick yourself for not getting it sooner. The ease of maintenance with the way the pro gun breaks down for cleaning...that alone is worth the investment.
I've done this to all my jeeps about 4 years ago....once all my buddies seen how sweet it comes out all of them have done the same thing. Freaking love this stuff. Good job man
One of the cleanest Raptor Liner jobs I’ve seen thus far. I’m still deciding on a color and I’ve also been wondering if you could add some sort of metal flaking to this product. Job well done sir! 👍🏼
For the entire jeep how much did you use? I’m wanting to spray mine but that stuff is a little expensive and I don’t want to buy too much or not enough:/
...I feel like it's kinda sad that you painted over one that already had a really nice original paint job though. I would've picked one with some already aging paint that needed re-done.
Had a friend do this about 3 or 4 years ago to his XJ. Looked awesome. Moved the front axel forward , lift, lockers , 38s, Atlas etc. On the taller creek banks the front end was just to light. Gotta Toyota on propane, 42 Super Swampers cut, I think , front forward , lift, lockers etc. This thing is a absolute beast!
@@pbmachines972 Yeah, this guy has quite a few toys. Rail Buggies, side by side etc. 80 x 40 garage , lift pretty sweet. He has worked all his life though, no freebies! Me, I can't do that. Retired and disabled. Shotgun blast at close range while working.
You mentioned that you used two kits. Did you use the six bottle kit or eight bottle kit? I have an XJ that I want to bed line, just not sure if i'll need the six or eight bottle kit. Thanks.
Did you do the inner door part as well? Or when you open the door you can see the red? I want to do my white XJ on grey but im afraid of the inner door part
Taco.... Do you run a RC lift? If so do you like it? I have one on mine (2nd time around) and i dont feel like its that great...i mean i feel EVERY bump and crack in the road, and it seems to roll quite a lot.....shocks wise....
Upgrade the shocks cheap ass. I going from a 4.5 rc lift to a 6.5 long arm rc lift with fox shocks and 1 ton steering upgrade kit with built dana 30s with upgraded drive shafts
@@pbmachines972 do you have to have a certain type of sprayer for bed liner? Never sprayed anything with a sprayer, painted my chipped up hood black with high heat flat black, this looks way better though might try do my whole 93 zj
Machine Addictive digging retail prices about $160 per kit I bought two but only used one bottle some tape and cleaning solvent as far as labor it’s basically a complete paint job if I gave a number total $1000 ✌️
@@derrickpenrod1745 You are absolutely right, I actually dont paint or do bodywork to vehicles. Why?? Because I make my own money to pay other people to do it for me. Can I learn? Why yeah I sure can but I dont have time for that right now. Have a good day son👍
Folks never do this, it stays clean for 5 mins and you will never get it clean again, ever. Anything you try to fix becomes an assnine project. Not to mention that the next guy who wants buy it walks up and says aw fuck, he rino lined it, must be screwed under that, prolly bondo, don't want this shit.
"Took me all day to mask this"... Yeah, TAKE OFF the fricken hardware!!! You really spent time masking the turn signal?? It's two screws! Handles, headlights, tail lights, roof rack... Take it off, Do it the right way first. As a collision repair tech, this is triggering me lol
Damn that’s so nice! I’m planning on doing this to my 1998 Jeep Grand Cherokee Laredo. I don’t mean to be rude when I ask this but how much was it to do this?
@@pbmachines972 it's tough when you get I big scratch in it,. Kinda tough to touch it up. A lot of kids do that to their trail rigs here in Pennsylvania. After a while they all look awful. But you did do a great job on that one
Doing it “right” would include removing doors & dismantling along with bumpers hood etc. The other problem is unless it’s the real deal “Line X” the results won’t last. I have several vehicles done in it , some 5 years old and they still look like they did when we sprayed them.. just got done doing my XJ love it!
I’ve been wanting to find someone that would do this to my 2000 Chevy Blazer. I know it’s pretty simply to do but I just don’t have to tools to do it. Is this something you’re willing to do for me? Or anyone else on here that sees this comment that I can pay to do my vehicle. Comment and let me know if you are interested. I would bring it to you.
Been good to do the jams if enough product remained (with time to spray it) and why not remove the bolt on body panels and scuff/spray rather than depend on seam seal? (Ive never had a jeep that didnt get a fender flare bumped enough to dislodge a bond to the body) keep in mind, ive never dealt with bolt on body panels, so my previous question may be ridiculous, if so, its out of my ignorance on the topic, not as a "troll". Thanks. Looks awesome
Hey man, great job. Could you please share how much products you have used? I live in the UAE and I'll have to order from the US, just want to get the amounts right so there's no hold up. Thank you
Looks great, just did this on my f150 running boards and bumpers. Tomorrow mirrors and door handles. Do you have any suggestions on spraying on the door handles?
Looks Good but what do you do with the door jams? Is that product to thick? Thanks for the video. I have been thinking about doing the same to mine (it’s in the thumbnail).
So you used purple power, then dewaxed it with what? And sanded it with 320 dry? You didn’t use no primer? And what did you clean all of the dust off with After sanding it, Great video though.
That looked really good you did a good job I do body work too and I got a 99 Jeep Cherokee that I want to ride online so it's good to see what it's going to look like when I'm done
If you told me that you were planing to do this job. I would think to myself. WHAT. But with this sort of vehicle it makes sense. To see the finished job, quickly changes your mind about, the WHAT factor. It does look pretty good. Great work.
a question I want to ask you after painting your truck with Raptor Liner, the paint does not lose the shine that remains after painting it, that is, with the dust and dirty it does not remain opaque, and later when you wash it, the paint raptor texture?
Parachoques y Mecánica General Farmor I think you can clear over your last coat of bed liner before it fully cures like no more than thirty minutes I would do a test before doing the whole truck
Panic thank you so much👍🏻 I used 5 bottles I did two coats first coat in one direction then right away in the other direction like thirty inches away from panels ✌️
Sup mem , you killed it with this paint job , its still the best bed liner job ive ever seen . I was wondering for your prep you just sanded the clear off added some new primer where it was on bare metal . And then did you shoot 1 or 2 coat ?
Just take gloss off no shiny spots do not burn through any paint and a kit and a half to do that job so you’ll need two kits a kit normally does one full size bed
![RAPTOR LINER PAINT JOB - How To Paint Your JEEP or 4WD With U-Pol Raptor Liner [Full DIY Guide]](http://i.ytimg.com/vi/OYjQK2oF2W8/mqdefault.jpg)
Damn, man. Great job. Got me wanting to do the same....
Right on
Awesome job, heavy attention to detail, patiently done and the care shows. Schweet looking ride.
8:13 would look awesome with a touch of bright green striping, the tape actually looks good around the header panel
camaroboi13 yeah your right a little color would look good
Told myself the same when it was still stuck on there... just a hint of colour.
Jeep people and their fucking lime green spray paint
Right I thought of same thing
I've Raptor lined all my armor and tub and trust me when I tell you...spend the extra $50 on the Upol vari-nozzle gun. The end result is night and day. You can adjust the texture for a consistent finish from micro fine to coarse and won't clog up and spit blobs of liner like the gun the kit comes with. Plus, adhesion promoter for all the tight nooks and crannies. Lastly, don't spray till the bottles empty. The residuals on the bottom of the bottle always gets clumpy.
I was wondering about a better gun although I’ve been lucky
PB Machines don’t get me wrong, I’m not saying you can’t get good results with the regular gun but once you try the pro gun you’ll kick yourself for not getting it sooner. The ease of maintenance with the way the pro gun breaks down for cleaning...that alone is worth the investment.
ApexPredator_JKU I’m not using that pos gun again can’t wait to get a good one thanx for the info👍🏻✌️
Got a link for that sprayer?
I've done this to all my jeeps about 4 years ago....once all my buddies seen how sweet it comes out all of them have done the same thing. Freaking love this stuff. Good job man
It doesn’t flake off? How hard is it to clean?
BAD ASS bro....mine is next!!!...hahahaha
Shoulda kept the rc logo on the panels red, wouldev popped
One of the cleanest Raptor Liner jobs I’ve seen thus far. I’m still deciding on a color and I’ve also been wondering if you could add some sort of metal flaking to this product. Job well done sir! 👍🏼
Brandon Devins thanks man yeah flake would be cool
Man one bad thing about my jeep is there person half assed the spray :/ unfortunate yours looks really nice tho
I have a 1995 Ford F-150 that I wanna do this too, gonna do an army green color
That looks awesome! Funny thing is the grill looked really good with the lime green outline from the tape! 😂
Cody McGill thanks man 👍🏻that’s funny your not the first one that said that
You did a great, but his paint was okay enough for a trail rig.
Agreed ✌️
That is a sick looking Jeep 🔥🔥🔥
Check out my build
Where did you get the taillights cause I need some and those are sick
For the entire jeep how much did you use? I’m wanting to spray mine but that stuff is a little expensive and I don’t want to buy too much or not enough:/
2:55 lol The McDonald's mobile.
Just razzing you obviously because of the colors. 👍✌️
Right on ✌️most of my videos are welding/fabrication maybe check it out thanks for watching
I think any idea that allows more Cherokee xj's to go on living forever is a great idea. The world will be a better place for it.
...I feel like it's kinda sad that you painted over one that already had a really nice original paint job though. I would've picked one with some already aging paint that needed re-done.
Had a friend do this about 3 or 4 years ago to his XJ. Looked awesome. Moved the front axel forward , lift, lockers , 38s, Atlas etc. On the taller creek banks the front end was just to light. Gotta Toyota on propane, 42 Super Swampers cut, I think , front forward , lift, lockers etc. This thing is a absolute beast!
Nice can’t have to much cool shit right ✌️
@@pbmachines972
Yeah, this guy has quite a few toys. Rail Buggies, side by side etc. 80 x 40 garage , lift pretty sweet. He has worked all his life though, no freebies! Me, I can't do that. Retired and disabled. Shotgun blast at close range while working.
Is this the XJ from the rough country ads? Lmao
Taygare lmao that’s what I’m saying I would never be proud to have RC on my XJ and If I had it i would never promote it
Wow that looks amazing. I would love to bedline mine but I feel like I would fuck it up.
Hey thanks that’s funny yeah it’s tricky ✌️
Probably
You mentioned that you used two kits. Did you use the six bottle kit or eight bottle kit? I have an XJ that I want to bed line, just not sure if i'll need the six or eight bottle kit. Thanks.
Dam dude I forget the bottle count but I used one kit plus one bottle out of the second kit hope that makes sense ✌️
Absolutely outstanding!! Loveeee itttt. This is exactly the car i want exactly like this . Awesome job
Needs a dark green color..for this jeep. Way better. And beautyful show beahicle.....
My wife just got a new Cherokee should I 😮
I’m spraying mine tomorrow almost forgot about the windshield wipers😅
Sweet job, I love that look
steven jacobs thanks tough as nails right
Did you do the inner door part as well? Or when you open the door you can see the red? I want to do my white XJ on grey but im afraid of the inner door part
We painted them black to match you should do yours the same way✌️
"Rough country is the great value (brand)of suspensions"
Taco....
Do you run a RC lift? If so do you like it?
I have one on mine (2nd time around) and i dont feel like its that great...i mean i feel EVERY bump and crack in the road, and it seems to roll quite a lot.....shocks wise....
Upgrade the shocks cheap ass. I going from a 4.5 rc lift to a 6.5 long arm rc lift with fox shocks and 1 ton steering upgrade kit with built dana 30s with upgraded drive shafts
I want to get a ugly z71 and do this to the truck in gray.
Cool I think we’re gonna see more trucks done up like this 👍🏻 I have mostly welding/fabrication videos maybe check it out thanks for watching
what is that color called? because it is not black only
Yes Raptor liner standard black
How many bottles did it take you I’m looking for that exact color for my jeep
Devan Mckeehan I bought two kits I used five bottles ✌️
@@pbmachines972 do you have to have a certain type of sprayer for bed liner? Never sprayed anything with a sprayer, painted my chipped up hood black with high heat flat black, this looks way better though might try do my whole 93 zj
Joseph Huffman yes they sell a cheap gun like $30 and a good one like $100
I bet it’s a bitch to wash
How does it for washing spray on bed liner
I would use a brush soap and water
Thought he had rhino lined the door handles lmao
It's not a bad idea really. The raptor liner is super durable and has good texture.
Nice work good video thanks for all the info. 👍 how much will a job like this cost materials and labor. $$
Machine Addictive digging retail prices about $160 per kit I bought two but only used one bottle some tape and cleaning solvent as far as labor it’s basically a complete paint job if I gave a number total $1000 ✌️
Nearest guy to me is 4 hours away that does bed liner jobs, I'm sure I could find closer but he charges 1500 to 2k for most trucks.
You should do it yourself it’s no big deal✌️
@@pbmachines972 between my full time job kids, and my wife. It's hard to find time for anything.
@@derrickpenrod1745 2k or 3 to 5k for a complete paint job?? I'd rather spend 2k, and good thing you dont make my money and pay my Bill's😂😂
@@derrickpenrod1745 You are absolutely right, I actually dont paint or do bodywork to vehicles. Why?? Because I make my own money to pay other people to do it for me. Can I learn? Why yeah I sure can but I dont have time for that right now. Have a good day son👍
This is now a stealth vehicle.
Folks never do this, it stays clean for 5 mins and you will never get it clean again, ever. Anything you try to fix becomes an assnine project. Not to mention that the next guy who wants buy it walks up and says aw fuck, he rino lined it, must be screwed under that, prolly bondo, don't want this shit.
"Took me all day to mask this"... Yeah, TAKE OFF the fricken hardware!!! You really spent time masking the turn signal?? It's two screws! Handles, headlights, tail lights, roof rack... Take it off, Do it the right way first. As a collision repair tech, this is triggering me lol
Man you got it all figured out now ya tell me
What size compressor you recommend
I have a 60gal anything less might be a struggle
Damn that’s so nice! I’m planning on doing this to my 1998 Jeep Grand Cherokee Laredo. I don’t mean to be rude when I ask this but how much was it to do this?
Your not rude at all a Raptor brand kit retails for around $160 your going to need two kits plus a gallon of prepsol $30 and tape $20 ✌️
PB Machines damn okay thank you so much!
Um don’t forget I have other videos mostly metal fabrication/welding maybe check it out
PB Machines will do man!
@@pbmachines972 hey one last question man, how many coats should I do? Just 1 coat?
super suv like
I once sprayed the entire undercarriage of a Dually Ford Diesel work truck and the drivetrain failed long before the body did. Over 4 million miles.
Wow that’s a lot of miles thanks for watching
I still advocate people do this to their own vehicles today 30 plus years on. Just make sure you drop the driveshafts and exhaust beforehand.
??? 4 million miles? How many times was the engine and tranny rebuilt?
That's not a truck... it's a jeep
🤪
Your doing it right,. But I gotta say I'm not a fan of bed liner painted off road rigs. It looks good for a while and then fades to grey
Walter Davis I think it’s a thing right now
@@pbmachines972 it's tough when you get I big scratch in it,. Kinda tough to touch it up. A lot of kids do that to their trail rigs here in Pennsylvania. After a while they all look awful. But you did do a great job on that one
Doing it “right” would include removing doors & dismantling along with bumpers hood etc. The other problem is unless it’s the real deal “Line X” the results won’t last. I have several vehicles done in it , some 5 years old and they still look like they did when we sprayed them.. just got done doing my XJ love it!
@@willy2192 you would be surprised how many body shop just rinse the vehicle off with water and spray it . And charge an arm and a leg
Willy raptor liner lasts too if you touch it up every couple months
Imagining this happening to my jeep. I need a good shop!
Yeah seems to be popular right now
Much better can't wait to do our 2000 Cherokee Classic in silver.. Nice job thanks fir the video.
Raptor is extremely popular in usa and Expensive
igmer barahona super popular right hey nice dog 👌 um I have mostly welding/ fabricating videos just uploaded one this morning maybe check it out ✌️
@@pbmachines972 im a welder my self
igmer barahona small world right✌️
Deliciously sick looking! Awesome job there..
I’ve been wanting to find someone that would do this to my 2000 Chevy Blazer. I know it’s pretty simply to do but I just don’t have to tools to do it. Is this something you’re willing to do for me? Or anyone else on here that sees this comment that I can pay to do my vehicle. Comment and let me know if you are interested. I would bring it to you.
Been good to do the jams if enough product remained (with time to spray it) and why not remove the bolt on body panels and scuff/spray rather than depend on seam seal? (Ive never had a jeep that didnt get a fender flare bumped enough to dislodge a bond to the body) keep in mind, ive never dealt with bolt on body panels, so my previous question may be ridiculous, if so, its out of my ignorance on the topic, not as a "troll". Thanks. Looks awesome
I really like the matte black
Now slap a 4.6 in it and you'll really grin
Is that a common swap for xjs?
Hey man, great job. Could you please share how much products you have used? I live in the UAE and I'll have to order from the US, just want to get the amounts right so there's no hold up.
Thank you
Full spray bedliner is a rough surface, how would this affect mpg and aerodynamics?
i think the guys missing the whole point of having an XJ for off roading if hes paying someone else to do body work and painting
He’s an awesome mechanic but gets scared when it comes to paint and body work
Looks great, just did this on my f150 running boards and bumpers. Tomorrow mirrors and door handles. Do you have any suggestions on spraying on the door handles?
inevitable tragedy thanks small pieces are tricky
Looks Good but what do you do with the door jams? Is that product to thick? Thanks for the video. I have been thinking about doing the same to mine (it’s in the thumbnail).
does this add weight? I have the i6 4.0 grand cherokee and just worry about adding unnessary weight. Like two big of a front bumper etc
So you used purple power, then dewaxed it with what? And sanded it with 320 dry? You didn’t use no primer? And what did you clean all of the dust off with After sanding it, Great video though.
Bed liners actually hold moisture and can create rust.. if over just bare metal or shitty paint lol
My xj has the paint chipping off. Would it be beast to sand it down to the paint and then somehow reseal it or just scuff it?
Where’d you buy the kit from? How much was it to do the whole rig?
I need some armor panels for the exterior of my van. Ribbits look awesome
great job ...is it forever ? or for 3 or 4 years ??
JESSY Siko it forever that stuff is like concrete ✌️
@@pbmachines972
we all hop that...
thank you for this video
That looked really good you did a good job I do body work too and I got a 99 Jeep Cherokee that I want to ride online so it's good to see what it's going to look like when I'm done
Soy aficionado de esta camioneta muy bonita
Its not a truck,its a jeep,lol
Thats cool. But doesnt bed liner color fade over time ?
Now whatever moisture gets in will want to stay trapped under there .
I would not but money in to that hunk junk
Canada! Place 2 be!! 👍🏻
Sorry but. The Cherokee. Not greates
Sweet! Black matt?
I love it. What color exactly did you use? I can't tell if this is a dark dark grey or a black.
Thanks it’s just plain black my led lights make it look grayish ✌️
@@pbmachines972 Thanks. I'm inspired.
Hey wat type of bed liner paint did u use
Brandon Sheffield U-pol makes Raptor liner
Bro you have 999 likes. I’m about to be #1000. 😬👍🏼. I will have to switch account first cuz I already banged a thumb awhile back. Cheers bro
Sweet that’s awesome✌️these Jeep dudes are serious
How much do you charge for this
Chris Goon base price black around 2G’s
If you told me that you were planing to do this job.
I would think to myself.
WHAT.
But with this sort of vehicle it makes sense.
To see the finished job, quickly changes your mind about, the WHAT factor.
It does look pretty good.
Great work.
Peter CCR ENG it’s the new thing in Jeep land everyone is doing it✌️
Я с вами единомышленники мира! Пусть будет мир и наше увеличения!)
on the front passenger door you got down the metal.
How much did it cost
The bedliner materials?
Hey bud, nice job I just did my xj and your turned out a little better, did you use the proper raptor gun ? And what psicwas it at thanks aye
Hey thanks I used the cheap ass gun high pressure and hold the gun like eighteen inches away
What is the color code do you know .. ??? Is it just the stock upol liner
Yes stock black
What's That color
tiny2bigtexas llc just standard black
How much does it cost to do a spray on bedliner on this jeep. I have a 99 DJ and want to go the same route
Around four hundred
У тебя классная мастерская - берлога! ))) мужик!
У меня cherokee 30 лет в этом году!)))
a question I want to ask you after painting your truck with Raptor Liner, the paint does not lose the shine that remains after painting it, that is, with the dust and dirty it does not remain opaque, and later when you wash it, the paint raptor texture?
I think over time the sun takes the shine away more than anything hope that answers your question ✌️
@@pbmachines972 But what would you recommend, my dodge ram I want to paint it black like this. but I don't know if it looks good full of powder
Parachoques y Mecánica General Farmor I think you can clear over your last coat of bed liner before it fully cures like no more than thirty minutes I would do a test before doing the whole truck
Agh! It came out soo good mate!!
Hey thanks man
It cover pine barren pin striping fairly good ? ?
👍🏻yeah it did
So what would have been a good time to pull off all that tape? When it was still wet? or maybe dryer than you did it?
Pull the tape when it’s dry enough like one hour
How many psi you spray out of the gun?
You said one kit did the whole vehicle. What size was the kit? I am looking to do an suv this size. I am trying to find out how many bottles to buy.
Carlos Wright I used a kit plus one bottle from the second kit
@@pbmachines972 5 liters?
My boy actually did the Reveal at the End 😭 👏
Is it possible to remove bedliner off paint? I would assume no...
You can use chemical stripper haven’t tried it yet might take a few coats
That turned out great. How many bottles did you end up using? Subbed
Panic thank you so much👍🏻 I used 5 bottles I did two coats first coat in one direction then right away in the other direction like thirty inches away from panels ✌️
What was the color code you used? Looks like Dark grey, every I’m finding is either black or grey, more like light grey, love that dark grey look!
It’s Black the lights make it look gray
Unwrapping like on a Christmas morning! Excellent 👍
Ismael Tomás 😆yep👊
Is bad ass mine is same but a 2 door 2wd really easy to clean haha
Jaime Romero right on thanks ✌️
Sup mem , you killed it with this paint job , its still the best bed liner job ive ever seen . I was wondering for your prep you just sanded the clear off added some new primer where it was on bare metal . And then did you shoot 1 or 2 coat ?
Just take gloss off no shiny spots do not burn through any paint and a kit and a half to do that job so you’ll need two kits a kit normally does one full size bed
My 16 year old alutraego say man it would go real fast now !! looks great.
Nice👍🏻