For anyone copying this build I would highly recommend not installing the optional dust cover on the top exhaust panel; it will only increase system temps, and trap dust inside the case. Also, for a system this expensive you should use an LGA 1700 contact frame. These two things would likely bring down max CPU temps 4-6C.
4-6C is nigh meaningless for a majority of people. If you're at a point where 4-6 degrees is meaningful, then you might want to start looking at other coolers.
@@icanmakeeverythingilovedie9861 Oh, I completely agree. The "majority of people" don't really care about a 4-6C difference. But the "majority of people" are not buying $3700 showcase computers like the one in this video. I don't think it's a stretch to believe that people who are willing to spend nearly $280 on fans alone might want to take an extra 5 minutes of their time and an additional $15 to drop their temps a few degrees.
i spent $350 on 10 nf-a12's for my build, still have the filter on top with top aio on exhaust, don't have a difference in dust, don't really have dust inside, and it doesn't increase temps by 4-6deg with the dust filter on either.
@@SNAPSHOTREVIEW would love to get my hands on it ngl but the nv5 isn't available to us locally so I may provably go for a lian li build instead. It's my first gaming rig and I'm kind salty now cause I didn't go with the glass build to begin with xF
Thank you so much! I'm glad you liked it💜🖤 I already have a main PC in use, so I usually disassemble it to use in the next build or sell it to buy new components.
Hi! The thing is a single connector with 9 pins. Yeah! It's different from other cases, but it's compatible with standard motherboard specs, so you just connect it. 💜🖤
It's set up with a top exhaust AIO cooling system, prioritizing GPU cooling. 06:54 in the video, temperatures are already below 90C, which is quite good. Installing the radiator as a side intake could achieve a balanced setup in the O11D EVO XL case, with bottom intake and top exhaust likely proving effective. For an Intel i9, opting for a top exhaust sandwich configuration or even a 420 radiator seems like a solid choice. Even with a preferred cooling setup, the EVO XL chamber is already massive, resulting in generally great cooling results.
Nice build. I did a build about 4 years ago in the EVO XL. I love the case. I do have a question. Are the fans on your radiator at the top set as exhaust?
Yo! You can install everything as is, except for the three 140mm Noctua fans at the bottom. Ah, the next video will be the Lian Li O11 Vision. I'm planning to use the Lian Li P28 cooling fans for it👍
@@SNAPSHOTREVIEW so I could probably fit 3 120mm fans at the bottom. What I like about the Vision is the removable motherboard chassis can move up or down a spot to add one or two fans to the back panel.
@@SNAPSHOTREVIEW when you do your next build with the Lian Li Vision O11 you should do it with the Aorus Master or at least one of the larger EATX boards because the Vision is advertised to fit EATX boards but only up to 28mm
You don't need to remove the motherboard plate for the build, there's no issue with that. I just wanted to demonstrate in the video that the EVO case can be disassembled for height adjustment.
I have the Lian Li Dynamic mini o11, it is a little wider than the EVO in the video, would it be possible to insert the 4080 aorus horizontally with the strimer plus v2 or with a cable mod?
I haven't personally used the Mini version, so I can't say for sure, but with the EVO, there are some tight spots for horizontally mounting the 4080 Aorus.
sir, is there a free 3x 120mm front fan bracket and meshed front panel from the box so you can replace the glass front panel?? this'll be my next case for my dream upgrade!
@@SNAPSHOTREVIEW my plan build was going to be a 360mm gpu rad like the aorus extreme waterforce future 5090 on the front as push/pull and also from the top cpu aio cooler push pull too. thats why this case is perfect for that
@@rcortez5979 Oh, I got it, bro! With such a build plan, a front mesh panel should be cool, I'm not sure if Lian Li HQ has plans for a front mesh though. Thank you for sharing your great build info!
Hello, my friend! That's the Lian Li O11 Dynamic EVO XL. It's large in size and gives us many build possibilities, but personally, it's too big for me. Please refer to the following link for more details. lian-li.com/product/o11-dynamic-evo-xl/ Cheers!!
Ah! I don't use the top filter when overclocking or using a small-size chassis. However, I typically just use it. Moreover, it's too much of a hassle for storage.
lian li evo xl is designed for water cooling. but the built-in aio standard components that could be put in a standard case without using the full potential of the evo. so sorry but a waste of the case in my opinion
I completely agree. The parts shown in the video are actually sufficient for the O11D EVO as well. Of course, it's also the highest-performing stuff I have. Thank you for your comment👍👍
Enjoyed watching the stunning build video. The combination of AORUS Master and O11D EVO XL looks great. Keep up the good work, mate!
Thank you so much, bro 👍👍
I'm glad you liked it!
Ah, the next one will be featuring an NZXT case with RGB lighting,
If radiator on top is an exhaust, i would lose the dust filter
2:20 Epic way to show how sturdy the motherboard is! LOL
Oh, thank you so much!
Actually, the motherboard and tray both were quite heavy 🤩
Awesome!!! I really enjoyed watching this❤
Thank you so much 👍👍
I'm glad you liked it, bro!
see you again in another video 💜🖤
For anyone copying this build I would highly recommend not installing the optional dust cover on the top exhaust panel; it will only increase system temps, and trap dust inside the case. Also, for a system this expensive you should use an LGA 1700 contact frame. These two things would likely bring down max CPU temps 4-6C.
4-6C is nigh meaningless for a majority of people. If you're at a point where 4-6 degrees is meaningful, then you might want to start looking at other coolers.
@@icanmakeeverythingilovedie9861
Oh, I completely agree. The "majority of people" don't really care about a 4-6C difference. But the "majority of people" are not buying $3700 showcase computers like the one in this video. I don't think it's a stretch to believe that people who are willing to spend nearly $280 on fans alone might want to take an extra 5 minutes of their time and an additional $15 to drop their temps a few degrees.
i spent $350 on 10 nf-a12's for my build, still have the filter on top with top aio on exhaust, don't have a difference in dust, don't really have dust inside, and it doesn't increase temps by 4-6deg with the dust filter on either.
How expensive would it be to make?
에보 XL이군요 ㅎ 오랜만에 들어왔는데 영상 퀄이 엄청 좋아졌네요 멋집니다 ㅎㅎ 성공하세요
오호 안녕하세요!
넵~ 서툴지만 최근 O11D EVO XL 작업했습니다.
좋은 말씀 정말 감사합니다💜🖤
This build is awesome! Great with another video😀
Thank you so much, my friend!
I'm so glad you liked it 💜🖤
영상 너무 고퀄인데요? 그냥 보면 외국형이 만든 영상같습니다 ㅎㅎ 빌드퀄하고 영상 모두 프로급이네요 이번 영상도잘봣습니다 ㅎ
오호 안녕하세요!
앗 과찬의 말씀이십니다.
자주 오셔서 글 남겨주시고 정말 감사합니다 😍
Hopefully Lian Li makes a 420 Galahad. It'll go great with this case. If not, custom cooling would be the way to go.
Nice build! Phantek NV-5 aircooled black out build when? :D
Thank you so much!
The NV-5 is too big for me, but I would be interested in giving it a try if I have the opportunity 💜🖤
@@SNAPSHOTREVIEW would love to get my hands on it ngl but the nv5 isn't available to us locally so I may provably go for a lian li build instead. It's my first gaming rig and I'm kind salty now cause I didn't go with the glass build to begin with xF
You can install Push and pull in the lateral/frontal zone? 25mm fan and AIO radiator 56mm
Forrest Gump will say " That’s not your PC “
You 🫵 : " why you said that?”
Forrest: because.. it have some guy name Liam Li all over.
lol~ thanks for your comment👍👍
I was always looking for a case to chuck the arctic liquid freezer 420 into.
3X420 support
Sick build! Your music and video editing are really cool. Do you complete the PC build and use it, or sell it?
Thank you so much! I'm glad you liked it💜🖤
I already have a main PC in use, so I usually disassemble it to use in the next build or sell it to buy new components.
EVO XL 이군요! 크기가 ㅎㄷㄷ 하네요 ㅎ
스냅샷리뷰님 영상보면 PC 빌드 뽐뿌질 100% 입다
파이팅하셔요!
넵^^ XL 버전이라 기존 EVO 보다 키가 큰 편이에요.
빅타워 좋아하시는 분들에게 딱 좋은 케이스 같습니다.
네! 감사해요💜🖤
How did you arrange front panel connection? Lion li evo xl has different from the mobo?
Hi! The thing is a single connector with 9 pins. Yeah! It's different from other cases, but it's compatible with standard motherboard specs, so you just connect it. 💜🖤
Hello,
thank you for the video.
How much space is there for a cable between the Aorus Master and the side panel?
Hi! The space is quite narrow, so the glass panels touch slightly.
It seems like vertical installation would be a good idea💜🖤
영상 퀄 미쳤네요 ㅎㅎ 에보 xl 드디어 나왔군요 멋집니다
안녕하세요~
오호 감사해요! 오늘 출시했어요 👍👍
Wow this is like pc build ASMR. 😂
Yo! Actually, it wasn't my initial intention, but it's like that suddenly. 💜🖤
Wouldn`t there be a ton of heat going from the GPU in the CPU cooler ?? I see u have the fans of the cooler on the exhaust setting not intake ...
It's set up with a top exhaust AIO cooling system, prioritizing GPU cooling.
06:54 in the video, temperatures are already below 90C, which is quite good.
Installing the radiator as a side intake could achieve a balanced setup in the O11D EVO XL case, with bottom intake and top exhaust likely proving effective.
For an Intel i9, opting for a top exhaust sandwich configuration or even a 420 radiator seems like a solid choice. Even with a preferred cooling setup, the EVO XL chamber is already massive, resulting in generally great cooling results.
Nice build. I did a build about 4 years ago in the EVO XL. I love the case. I do have a question. Are the fans on your radiator at the top set as exhaust?
Yes, I used it as an exhaust cooling fan!
woahhh..so fast lian li evo xl
YE-AH! Thanks for your comment bro 👍👍
@@SNAPSHOTREVIEW why evo xl no seem less tempered glass?
Well... Actually, you can remove the distracting middle bar in this case. But overall, great build tho
Thank you so much👍
Right!! Maybe next time, I'll give it a try again.
I really appreciate you watching the video💜🖤
That 12VHPWR Cable looks pretty dam snug on the glass lol, maybe go vertical bracket?
Yeah, it touches slightly.
Vertical or upright mounting would be much better 👍👍
beautiful....what are the adapters you used to connect the 3 noctua?
I used a 3-to-1 PWM fan splitter for those fans.
Please refer to the following link for more details.
a.co/d/dWf3aGt
guess most people buying this case for uprightmount 40series gpu me including
I agree! If the upright kit comes out, I will give it another try.
Thank you so much💜🖤
This wouldn’t fit in the new Vision O11 case would it?
Yo!
You can install everything as is, except for the three 140mm Noctua fans at the bottom.
Ah, the next video will be the Lian Li O11 Vision. I'm planning to use the Lian Li P28 cooling fans for it👍
@@SNAPSHOTREVIEW so I could probably fit 3 120mm fans at the bottom. What I like about the Vision is the removable motherboard chassis can move up or down a spot to add one or two fans to the back panel.
@@SNAPSHOTREVIEW when you do your next build with the Lian Li Vision O11 you should do it with the Aorus Master or at least one of the larger EATX boards because the Vision is advertised to fit EATX boards but only up to 28mm
Are you 100% this will fit? I am having a difficult time fitting my board into the o11 evo rgb
Did you have to take the plate off the back of the motherboard ? I can’t get some of the screws to reach the standoffs.
You don't need to remove the motherboard plate for the build, there's no issue with that. I just wanted to demonstrate in the video that the EVO case can be disassembled for height adjustment.
어랏? 생각보다 측면 유리덮개와 12vhpwr 포트간의 간격이 되게 좁네요?! 저거 유리덮개 닫으면 선 휘는거 아닙니까?
휠 정도는 아니지만 살짝 닿아요. 높이있는 GPU면 수직 장착이 아무래도 좋아요.
Its an EATX mobo right? Does it overhang on the right side? Thanks
Yes it is!
I have the Lian Li Dynamic mini o11, it is a little wider than the EVO in the video, would it be possible to insert the 4080 aorus horizontally with the strimer plus v2 or with a cable mod?
I haven't personally used the Mini version, so I can't say for sure, but with the EVO, there are some tight spots for horizontally mounting the 4080 Aorus.
sir, is there a free 3x 120mm front fan bracket and meshed front panel from the box so you can replace the glass front panel?? this'll be my next case for my dream upgrade!
Thanks for your comment!
It is not included in the package. However, the cooling seems sufficient already. I don't think a front mesh is necessary. 💜🖤
@@SNAPSHOTREVIEW my plan build was going to be a 360mm gpu rad like the aorus extreme waterforce future 5090 on the front as push/pull and also from the top cpu aio cooler push pull too. thats why this case is perfect for that
@@rcortez5979 Oh, I got it, bro! With such a build plan, a front mesh panel should be cool, I'm not sure if Lian Li HQ has plans for a front mesh though. Thank you for sharing your great build info!
@@rcortez5979 Bro! It seems like they might release a mesh kit. Take note👍
@@SNAPSHOTREVIEW oh hell yeah 🔥🔥🔥🔥
AORUS 저도 참 좋아하는데요 제가 한번...
ㅎㅎ 감사합니다.
저도 AORUS 너무 갖고 싶어요 :)
Can you tell me info of the case. Thanks
Hello, my friend!
That's the Lian Li O11 Dynamic EVO XL. It's large in size and gives us many build possibilities, but personally, it's too big for me. Please refer to the following link for more details.
lian-li.com/product/o11-dynamic-evo-xl/
Cheers!!
Why the filter on top? 😢
Ah! I don't use the top filter when overclocking or using a small-size chassis.
However, I typically just use it. Moreover, it's too much of a hassle for storage.
12vhpwr슬리빙케이블은 어디꺼일까요?
안녕하세요.
CableMod 제품입니다. 여러 제품이 있는데요. 제가 사용한 케이블은 시소닉 파워서플라이 전용 케이블이에요. 한국분이시면, 서린씨앤아이에서 구매가능해요.
@@SNAPSHOTREVIEW 답변 감사합니다!!!
Какого диаметра вентиляторы толщиной 15 мм, можно установить для охлаждения жесткого диска?
Dude, I don't remember the chassis details exactly as it was a long time ago.
The case was quite big, so you might find the specs helpful!
Sorry man👍
black lian li v2 fans would be better
에보xl인데 전면과 측면 사이 코너바가 있는건가요?
안녕하세요~
넵! 맞습니다💜🤍🖤
@@SNAPSHOTREVIEW 원래 없지 않나요?
@@PersonA00777 아하! EVO XL의 코너바는 기본적으로 장착되어 있지만, 제거 가능한 형태라서 어향 형태로 빌드할 수 있어요 :)
@@SNAPSHOTREVIEW 아하 그렇군요 ㅎㅎ 답변 감사합니다 ㅎ 영상 잘 봤습니다!!
lian li evo xl is designed for water cooling. but the built-in aio standard components that could be put in a standard case without using the full potential of the evo. so sorry but a waste of the case in my opinion
I completely agree.
The parts shown in the video are actually sufficient for the O11D EVO as well.
Of course, it's also the highest-performing stuff I have.
Thank you for your comment👍👍
Turn off the f ing BGM
Thank you for your valuable input!