RTX 4090 - I9 13900K - Lian li o11D Evo - All Watercooled PC building
Вставка
- Опубліковано 19 чер 2024
- No Drone Footage for today.
I built a new Workstation/Gaming PC for me, to edit my Videos, for drone simulations and for gaming.
PC Specs:
CPUI: Intel Core i9 13900k
GPU: Asus Rog Strix 4090
Mainboard: MSI MAG Z790 Carbon Wifi
SSD1: Samsung 980 Pro 2TB
SSD2: Adata Legend 850 2TB
RAM: Kingston Fury RGB 5600MHZ 2x32GB
PSU: Corsair HX1000i
Waterblocks: from EKWB
Fittings: Alphacool Eiszapfen
Content:
0:00 Building
10:00 Final result
I think now i should be able to run "Velocidrone" =)
#rtx4090 #pcbuild #watercooled - Фільми й анімація
Very nice build here. I'm only upgrading my GPU from a RTX 3070 to 7900 XTX in December. The Dynamic always looks clean but im very happy with the Phanteks P500A I use.
Clean build! Love the ending shot of the product at work!
Really cool system! I didn't even know waterblocks for 4090s existed until I watched this video!
This video is worthy of a very big channel. It deserves a follow!
The quality of edits and shots here are top notch. I assumed this was a very large channel, and was enamored by the quality of content. Great build!!
Thank you very much!
same.. subbed
@@rrdrone90 I concur - subbed!
This is exactly the one PC build i'd make for myself, if I could. Wouldn't have it any other way. Turned out just the way I expected.
And yes, I know the O11 with Unifans is probably the most common build nowadays, but there's a reason for that. It looks stunning.
Thank you very much! Yea its a realy awesome looking computer! i love it.
Im VIBING with the music and the build.
TREMENDO LABURO!!! Saludos desde Argentina! Espero que el canal crezca mucho, muy buen contenido y calidad
I really liked this build. Well done, the video was excellent as well.
Awesome build and super high quality video!
Really badass looking build! Well done!
This is amazing work you know your way around pc's 10/10 sir enjoy.
That is a nice build. Very impressive 👍
One of the most beautiful builds ever seen. Good job dude ❤️
Nicht schlecht, so eine Custom Wasserkühlung zu bauen macht ja auch richtig Spass! Top.
Stunning build
Awesome build video, among many like it, this one is tops! Especially that music, WOW! Gotta say that's pretty much what kept me watching - nice work!
Thank you very much!!
Nice looking PC I will be glad when I finally get my 4090 in 2 weeks hopefully
using same mobo for my 13900k+4080 build absolutely love the way it matches my gaming trio GPU
WOW! A piece of art! 😍
great rig, its gonna crush whatever you throw at it
That intro music got me cooling my pc with Black Briar mead
Great setup, love the build, and also your own personal touches, thanks for showing us how it's done in the Evo!
I'm still waiting on my EK 4090 Strix ABP, currently running it on air in a Hyte Y60. I've decided to do my first custom loop- in a Singularity Spectre 3 Umbra, coming this weekend. So excited!
Thank you very much!
Yeah i waited long aswell. I ordered mine at 12.10.
But you will love it!
hi am thinking of getting spectre case. i have no idea about water cooling. would like to see ur build. tks
That final result is my dream
Best of luck on your journey through Tamriel
It's a very pretty custom! I would aim to have a computer like that, too.
The PC looks really nice. 👍
Complimenti, bellissimo video.
this pc is actually insane
holy sheesh, only 742 subs? bro this is movie quality, get this guy a playbutton! keep going my friend!
What means only? I had 170 subs, when i uploaded the Video xD. In my eyes 700+ is absolutely insane for me!.
Thank you very much!
awesome video, insane build.
오.. 너무나도 보기좋고 심플하면서도 멋있는 빌드! 마음에 듭니다
This is my second time watching this video. I love all of it all the quality of the video and the quality of the build!! You are talented. Funny thing is, I am a plumber by trade and a gamer by nature! The first thing I started looking at was the bends in the tubing and the routing. Very well done. You have at least $8500 into that PC if not more.
Thank you very much! i appreciate it!
I payd about 7.5K Dollar for everything.
I realy love building high end PC's. If it would be cheaper i would do it moore xD.
Super Nice Build 🎉✨🔥🔥
A real Beautiful PC
Wauw beautiful edit. I'm really impressed.
Watching it for a second time, bro what is this quality! Love that first song. Majestic!
when u said “edit” i thought you meant it’s so good that you thought it was fake lol
@@duckleaf69 nah bro genuinely very nice edit! :)
Verry good video and build. I like the way you put subtitles for each part during the video when you are installing that part. Everyone else just puts the parts list in the description. Both work, but I prefer this way. I have same case and right now I just have AIO's, but want to eventually get same water distribution block and custom water cool mine as well.
Nice Music very epic and this hardware is very nice.
I love the rgb color very unique
beautiful
Damn dude. This is fn sick! Just did my 1st build not to long ago. 14900k/4090 strix. But damnit. Now I think I need this. 😄
Thank you very much! Yeah i love it! Its in daily usage :)
I like it super clean.
Very Nice!! Way to go.
wow that's sick mate 🤙
Super awesome 👏 👍
Nice work!
Love it
Holy shit, that's awesome 👌
Компютор мечта любого геймера
amazing pc build, love it.
i pretty much did the exact same build as you and i love it so far. it took awhile to get the gpu block but i got it last monday and plan on installing it this weekend. ive been temporarily using the stock strix 4090 and its a beast at gaming. although in cinebench the cpu runs quite hot, and i mean 100 degrees C hot. however i dont have the same radiator config as you. i have a p360x (thicker than p360m) on the bottom, p360m on the top, and a p360m on the front on the side. thinking about getting an external rad like you did but if im not doing video editing idk if itll be worth it because in games it runs pretty cool. anyways, thanks for the inspiration! there arent many videos like this out there.
Thank you very much!
The 13900k gets very hot, if you dont undervolt it or set a max power limit. Esprcialy in Benchmarks like cinebench. Thats absolutely normal.
If you like the temps and if its not too loud, then you dont need an external rad.
But i love my MoRa. External rads are a completely different level xD
Looks incredible!!! Music could be a bit more sinister though. 😈
hell yeah brother
Banger music
Wow🤩
I think you are going viral :-)
come on dudeee led power cables are overkill :D
Coisa linda ❤
Amazing😢
Fantastic!😎👍
Really would like to hear the system when it's running and see how it's workin. Planning something like this? 🤔
Nice
I see morden stuff, but the music giving me past vibe like back in the old day where we go outside and go on a Adventure
Yeah. But it was an adventure to build this pc aswell xD.
Забавно ! Молодца ! )))
Good music.
Nice build. Did you "frost" the tubes yourself or are those factory done by I think corsair hydro and alphacool got them pre-done right ? Was thinking of making a similar build. Very nicely done.
Thank you very much!
Those are Alphacool "satin" tubes.
But i had to "refrost" the bends, because if you heat them they loose the frost a bit. So i did refrost it with 180 and 260 sandpaper.
@@rrdrone90 Ok, thanks for sharing that info.
Geiler PC 👍
Hello there,
I am building this exact build! I love it! I have all the components but I have a question on the custom loop:
From the top radiator to the distro plate - do you recall how many extender spacer you used? How many mm?
Thanks in advance! I just want to make sure I get all the proper parts for this part :)
You just need 1 spacer.
1x www.ekwb.com/shop/ek-quantum-torque-extender-static-mf-28-black
And 2 of this ones
www.ekwb.com/shop/ek-quantum-torque-extender-rotary-mm-14-black
And 2 90° ones
@@rrdrone90 you are the BEST! Thank you
brutal ☢
What was the reason for swapping the pump on the distribution plate and what did you swap it to. I am getting ready to start my first custom loop build with similar specs. What temps are you getting?
I did only swap the pump mount.
You can see the original mount with the visible d5 pump when i start to loose the screws. After removing it i replaced the mount with a better looking mount, that hides the d5 pump, and with my logo on the side :)
My temperatures are good. The i9 13900k is hard to get cool if you benchmark it (cinrbench) with 300 watts+ he gets about 80°-90°c by 30°C water temperature.
But in real use sceanrios its moore like 60°c
My water temperatures and noise levels are over the top. But that is because i have a external MoRa in the loop.
the 2 tubes that go under the gpu lead out of the case to the external radiator. So my water temps are about 6-7°c over ambient under full load :)
Looks like double 360 rads one pull and one push? What kinda temps you get under load? I am lookingg at something similar but with front intake and triple rads.
Yeah internal i use double 360rads.
At the bottom and the top.
But what you cant see in the Video i also use a external MoRa 420 radiator!
The 2 tubes that go under the gpu lead out of the case to the external radiator.
With the MoRa 420 my temperatures are very good.
Water temperatures under full load, about 5-7°C over ambient.
The i9 13900k is hard to cool. With 30°C water temperature he reaches 85-90°c on cinebench.
The gpu stays cool at about 50°c
Curious if you used a drain valve and if so, where you put it? Also, what custom cables are you using the light up like that, those look really good in your setup? Nice work!
Thank you!
I dont use a drain valve. Because for me its useless. I use a external MoRa 420 radiator. And if i have to drain the loop i just take out one of the external soft tubes.
The 24pin ATX power cables are the "lian li strimers"
this is the way, there is no other way, that i can see.
Building almost the same exact thing right now. Did you have any issues with spacing with the distro pump and side radiator/fans? Which exact radiator models did you use on the top, side, and bottom?
i use only top and bottom Radiator^^ 2x 360mm I think a 240mm side radiator would fit as well. but i am not sure about that. I use the 2 internal 360 radiators and a external MoRa 420! I dont need moore Radiators^^
Wow, I'm doing a very similar build but with AM5/7950x. I'm building in the 011 XL. I just started testing all the parts a few days ago. How do you like the SL Infinity fans?
Thank you.
The XL is a nice case aswell.
I love the infity fans! They are quiet, and looks very nice
@@rrdrone90 My AM5 build won't have additional lighting. I'm relying on the 10 Infinity SL fans and CPU/GPU blocks to provide all the lighting needed. The 011XL is a great case for radiators...Lian Li just announced the EVO XL case which should be a lot of fun with 140mm fan support.
Here before famous!
👏haha. Thank you!
I really wish the Evo Distro plate wasn’t $500. Lol. Beautiful build!!
Thank you! Yeah some parts realy are a bit too expensive in moment!
Way to get ahead of the curve. In a year (maybe) this video will actually be relevant when us normies can buy GPUs again without having to pay a scalper.
Thank you! Yes the prices in moment are a pain! I hope so as well!
Great job, beautiful build. Can you post a link to it on pcpartpicker if you have it there? I'm consider a water-cooled build right now and it would be really helpful to just clone this.
Thank you very much! Hmm i dont know "pcpartpicker". But ill take a look on it!
Excellent build and b-roll too! Did the choice to go with the Alphacool Eiszapfen fittings have more to do with looks or are they just good fittings? I am looking at the EK Torque fittings...
Thank you very much!
The choice for the alphacool fittings came with the choice for the 13mm Satin hardtubes from alphacool.
EK does not have any 13mm hard tube fittings.
@@rrdrone90 Thanks, cheers!
This is so cool! I build computers for a living. How did you manage a direct connection with the fittings and the EVO block on the top rad? Super impressive stuff!
Tank you very much!
The direct connection is possible because of the "EK Matrix 7" the Distro plate and the Radiator are both "Matrix 7 compatible" so its possible to connect them only woth fittings :).
It was a bit a mess to assemble xD but at the end it fits :)
Hello! I do appreciate your video because unlike the others that I have been watching, you put details that I always was like ''damn! What, why , how or how many etc..''.Thank you so much but I have few question, could you please help me out to get them properly because I also got the same system just it's amd ryzen 9 5950x and rtx 3090 unlike yours.
I basically got almost everything what you showed but,
*First* : How many fittings are there and how many should I get? Alphacool icicle PRO 13mm HardTube fitting G1/4, 6 pieces. Are these okay? If so are these enough as 6 pieces?
*Second* : Which tubes do you recommend, how many and the sizes?
*Third* :as the fans, should I use the same ones for the second radiator? And also there is one solo there except the six of them, on the back side, what is that one? I mean the size, rpm and etc...
*Fourth* : For the graphic card I was thinking about using this holder bracket(ASUS ROG Herculx Graphics Card Anti-Sag Holder Bracket) but because the fans are down there it will be too big to fit there I think so can I ask which one did you use there and do recommend something else like just for a lil more show off just like this one ASUS ROG Herculx Graphics Card Anti-Sag Holder Bracket).
*Fifth* : As last one, which fuel do you recommend? I would love to use like red or smth outstanding but I am not use if there is a limit about fuels.
Sincerely thank you, I will be waiting for your answer
Hey. Thank you very much.
Can you please pm me via e-mail?
"rrdrone@gmx.ch"
Ill try to answer all your questions in a e-mail :)
@@rrdrone90 Yes of of course thank you!
Within the upcoming weeks, I'll build within this case, but my research has caused some questions to arise. Looking through your description, I observed that your watercooling components are from EK, so I'm under the impression this is an EK distribution plate? If so, which version?
My build is relatively similar to yours, although I'll have a 4090 FE within my case. Which size radiators did you choose to go with?
Final question I can think of, when building your loop, did you use any offsets?
I use Watercooling parts from different brands... some Alphacool (fittings, Tubes) some EKWB (distro, blocks, radiators and some Watercool (external MoRa 420 Radiator). The distro is from EKWB. I think there is only one distro plate for the O11D Evo. The others are for the older o11 cases.
My Radiators are internal 2x 360mm Radiators and external 1 MoRa 420 Radiator.
And no i did no use any offset fittings! I dont like them... they looks bulky and ugly in my eyes! I did bend the offsets in my tubes :)
@@rrdrone90 in my sleep deprived state I did not realize you had the items you used listed within the video itself. The majority of my parts are here, which I'm exuberant about, but I also have so many nerves coursing through my veins. I hope my build turns out as good as yours!
Excellent build! This is the way 😅
I'm curious about the temps you're getting with the 13900k full load. Can you share it please? Thanks.
Thank you very Much!
The i9 13900k is realy hard to cool! i did undervolt it a litle bit, and now i get about 80 to 85°C (by 30°C Water termperature) under Full load like Cinebench or Prime 95. that thing pushes 300W+! But the performance is amazing!
@@rrdrone90 thanks for the fast reply. It is indeed hot 🔥! But those are not bad temps at all.
The graphics card stays cool even with that heat on the water?
@@iLoGiKZ yea it gets hot. But in normal daily use it stays moore in the 60°C.
the graphics card never gets moore than 55°c.
I did not expect that much attention from the video :X.
I think ill post a second video later, with some details about performamce temperatures etc.
@@rrdrone90 That would be awesome! Thanks for all the info.
The new ryzen cpus are now at average 20% discount here in Europe. This now changes the balance in cost/performance between the two CPUs, although Intel still takes the lead in pure performance, at least in gaming.
love it :). What is your radioator config bottom P or x and top ? thx
Thx. I use at the Bottom a ek 360SE (slim radiator, only 25mm thickness) and top is a 360p.
+i use a external MoRa 420 Radiator in the loop. With that,the internal ones are kinda useless amd only for the optics.
I'm also considering similar build :) I would like to know that do you think you can fit that P360M radiator on the side panel instead of top with the same distro plate and fans?
I think the Distroplate official only supports side radiators up to 280mm. But maybe if you dont use the top radiator it could possibly fit.
Would be a trial and error xD
Quick question - I've seen you using alphacool eiszapfen fittings. Haven't you had an issue with the orings inside being too thick?
The orings was not a problem... the inside of the fittings wasabot tide..but it workedat the end.
I just priced this loop for my PC. 14x the price of my cheap AIO. Looks absolutely beautiful. How does it sound?
there is no sound... its completely silent. The only thing i hear sometimes is the GPU "coil whine" but its not bad. Just a litle bit under full load with high FPS. Not a problem for me.
Now you just need to replace all those screens with an Odyssey ARK
😍
How are your temps with that setup? I’m almost done on my build. Almost the same and everyone is saying 3 rads for the 13900 and 4090. And how do you have your fan placement for the rads?
I have 3 rads. I use a external Watercool MoRa 420 aswell.
You can see the 2 tubes that run under the gpu, they lead oit of the case to my external MoRa.
I think only 2 internal rads would be enough. But would be very noisy!
Amazing looking build! What are the temps with that watercooling?
Thank you!
My temperatures are very good, watertemperatur is about 32°c under full load. But i dont have only the 2 internal 360 radiators. I have a external MoRa 420 in the loop as well. The 2 tubes that passes under the gpu, leads out of the case to the external Radiator. Thats why my temperatures are very good :)
Super nice.
Which pump did you choose?
I’m already on a watercooled 12700k+3080ti. I took my old stuff (velocity, 1x360 + 1x280 + SPC pump) but it’s too loud (even with my eloops) i want to upgrade to DDC because of the high float at 50%
Do you agree?
Thank you!
I use 2 D5 pumps. The one on the distro plate, and one external Pump. Because i use a external Watercool MoRa 420 Radiator aswell. When your system is too loud than you should upgrade your radiators (or is only the pump too noisy?). The best solution is allways a external Radiator! That is like day and night!
the pump runs at full speed. the volume of it is ok. but I have to turn my fans higher so the water doesn't get too warm. I heard that the SPC is too weak for a dual radiator system. But since I still had it left, it's pure for now. (Before that I had only cooled the CPU with a 360). since I was lucky enough to get a 3080ti for an original price, but this is an FE (too loud), so I have expanded my system by a radiator and watercooler for the gpu.
Now I am considering between D5 and DDC
surprised how many fills it took when u ran the pump.. like damn still more room!
i was surprised as well^^. But i think it is because the Distro plate AGB for the lian li 011d evo is very small. In other distro plates the pump is at the bottom. But because you can flip the o11d Evo, the pump in this distro plate is in the middle. That means you can only use the half volume.
Hi ! It's a very nice pc build but shouldn't the PSU be flipped? The fan doesn't have acces to fresh air it's just facing a motherboard tray.
Thank you!
You are absolutely right! I mounted the psu wrong in the video.
But i did notice it, and did turn it. In the finished build its turned, but i had no video footage of turning it.
Absolutely gorgeous build! What are the temps like with that build? I'm currently in the process of doing the same but with a o11 Dynamic XL and 3 360mm radiators instead of 2 and just wanted to know if I really need that third rad at all. Again, you've built something gorgeous here!
Thank you very much! My temps are very good i think. But i am a "cheater" because i have not only the 2 internal Radiators you see in the Video. I have a external MoRa 420 in the loop aswell (the 2 tubes that pass under the GPU lead out of the case, to the external Radiator). And i get around 32°C Water Temperaturs under full load with this setup. That means about 50°C on the GPU. and max 80°C on the CPU (the i9 13900k is very hard to cool!). I think only 2 internal Radiators would not be enough to cool that much of power consumption away. Espcially not, if it have to be silent^^. I would use at least 3 Radiators internal. Or like i did use a external Radiator (Thats the most powerful and silent option).
@@rrdrone90 Thanks for the response! I've got 3 EK CoolStream PE 360mm rads (45mm thickness on the rads) so I'm hoping the extra surface area will help compensate for the lack of an external rad. I don't really need for this to be silent (I always use headphones) so that isn't much issue for me.
Is that 80 C number on the 13900K under a synthetic load (like Cinebench) or is that just while you're gaming?
@@Ascendxnce i think if you dont need the absolute silence, you will be fine with 3 radiators.
The 80°c is getting in cinebench etc. (If i overclock it i can get it to 100°C in cinebench aswell).
In gaming loads (Star Citizen, Cyberpunk or Tomb raider) its moore around 60°c.
So its completely fine.
What's the benefit of that reservoir with pump .. and what's the different pump you've installed. I currently have just regular tube shape reservoir
@@smokuevo its mostly just for the optics. Because it looks very clean.
And i did not change the pump! i just changed the pump top, to a better looking one! All just for the optics.
I am curious, since I am installing a top and bottom rad in the same case. Was there an aesthetic reason that you didn't do the same thickness rad top and bottom?
Amazing build and video by the way!
Thank you very much!
The reason i used 2 different rads has space technical reasons.
The top radiator is compatible with my distro plate, so i could connect him without fittings. If i would only use 2 internal radiators it would be the best to use the same one in the bottom.
But my problem was the space between gpu and the radiator, because i use a third external MoRa 420 radiator (not seen in the video).
You can see the 2 tubes that run under the gpu, they lead out of the case to the external Radiator.
If i would use the same rad as the top one, i could not fit the 2 tubes under the gpu. Thars why i had to use a "slim" radiator in the bottom.
@@rrdrone90 thanks, that makes complete sense. I was wondering what the tube at the bottom was. I saw the pcie slot is lower on the carbon boards rather than directly next to CPU socket. I had to replace the motherboard m2 heatsink with a low profile on my motherboard otherwise the ABP wouldn't fit. Again, amazing video! Case looks amazing, great insight/detail on your build, and your filming and editing skills are amazing!
@@rpalamara80 yeah the gpu on the Z790 Carbon is one slot lower.
I like that, that gives enough clearance for the active backplate.
Thank you very much!
@@rrdrone90 Me too! I had already opened my motherboard and thinking to myself why doesn't it have clearance like your video! Hindsight being 20/20 I would have gone with a carbon as well.
Dear Ek, please sleeve your pump wires together for half the length..
Amazing Video! Which tubes did you use?
Thank you! I use Alphacool "satin" tubes 13mm
Well done my friend its a showcase pc
make this pc a giveaway
😍😍😍😍