Spot 30:11 on your video. Who makes that metal plate attached to the side of your shifter console where you have the CB Mic, flashlight and Leatherman attached too? Also who makes that pistol mount? Awesome overall setup, you can go places deep off grid for weeks at a time!!!!
Glad to find more raptor overland content. I also have the Billie bars on my gen 2, love all the attachments they sell. Any plans for a system to anchor down storage in the bed?
Yeah, super happy with the billie bars stuff. Great guys there too. Not anymore. Like I said in the video, my entire setup is changing . So there won't be a need to anchor anything down anymore. But if I were to keep this current setup, yes I would definitely anchor stuff down, because when doing raptor things on longer stretches of road. Things tend to not stay where they were.
It's a rubber chair leg bottom. If you go in the hardware section of tractor supply or Home Depot, where the felt sticky things are to put on the bottom of chairs/furniture. You will find these as well. I just cut out a hole in the solid end, so that one of the adapters that fits on the pump can go into it. And BOOM you have an enlarged adapter for the end.
Can you give some details regarding the fridge mount? Looking for ways to safely do this with my truck in case I get into a bad wreck or something. I couldn't tell, did you remove that seat? I see online there are 40% seat delete kits but damn they are expensive. Love your content btw. Fellow cheesehead here who makes those long drives outwest as often has he can.
Interesting setup how you offset your Skycamp Mini to make room for the water tank and awning. I have the same Skycamp Mini and Billiebar setup on my Tacoma. I’m going to have to try your setup. Makes a lot of sense. Thanks for sharing.
How much extra weight would you estimate you've put on to the truck? With its payload capacity did you find it sagging or did it hurt the truck more? Did you have to upgrade anything? I was thinking about getting one as a minor work truck, not anything crazy but may be a tool box and a few boxes and some buckets. But I can't afford two trucks. I too am looking at a 2013-14 reinforced frame supercrew. I love seeing trucks being used for what they are. With this I can have a small Home Depot cruiser and something for the dirt lol.
I would probably say I added around 500 lbs fully loaded with fuel in the rotopax, and water in the waterport. Yeah, I mentioned in the video that I upgraded the rear leafs. Stock ones were shot as there isn't much to them anyways. But I threw on ICON Multirate leafs. They are amazing and really change the dynamic of the truck. Both on and off-road. They add to the payload capacity, and lift the truck a little. So to answer your question. Yes on stock rear springs, it did sag a little. Now it does not.
@@jurassic_overland okay I appreciate your response. At the time it was during a noisy ride and I was missing some info so I'm not surprised. I apologize
Love the build, I’m running a 13’ f150 but upgrading to a first gen! Awesome seeing what you’ve done to it
One of the best walk around that I have seen in UA-cam congratulations!! Also great set up!! Proud new follower!🙋🏽♂️🙋🏽♂️
Very nice I hope you get more subscribers. I'm starting to build my gen 1 after 8yrs of owning it.
I got my question answered here from your other video lol I think it's crazy you're cutting on metal . Love the setup
Wait which part?? No metal. The tailgate is literally a full size cutting board (food safe plastic).
Look up “Mountain Hatch” tailgate tables
@@jurassic_overland Oh really! it looks like metal. I'll sleep a lot better tonight lol
I have a 13, looking to build it to be overland/hunting rig. Your truck is awesome, great build. Thanks
Thanks man! Good Luck on your build!
It's not practical but it's a beast. Yes it's wider but that 6.2 is bulletproof.
Most definitely!
Cool setup overall.
I’ve got a ‘13 Raptor that I recently equipped with an AT Habitat. Looking forward to see what you do with truck!
That's awesome man! I actually highly considered an AT Habitat when figuring out my upcoming setup. Do you have a video or pics of your setup?
Good video! Awesome setup!
Thanks!
Spot 30:11 on your video. Who makes that metal plate attached to the side of your shifter console where you have the CB Mic, flashlight and Leatherman attached too? Also who makes that pistol mount?
Awesome overall setup, you can go places deep off grid for weeks at a time!!!!
Great setup and very helpful!
Glad to find more raptor overland content. I also have the Billie bars on my gen 2, love all the attachments they sell.
Any plans for a system to anchor down storage in the bed?
Yeah, super happy with the billie bars stuff. Great guys there too.
Not anymore. Like I said in the video, my entire setup is changing . So there won't be a need to anchor anything down anymore. But if I were to keep this current setup, yes I would definitely anchor stuff down, because when doing raptor things on longer stretches of road. Things tend to not stay where they were.
I have the same little mini pump. I haven’t been able to use it be used I need an adapter like the one you have! How did you do that diy?
It's a rubber chair leg bottom. If you go in the hardware section of tractor supply or Home Depot, where the felt sticky things are to put on the bottom of chairs/furniture. You will find these as well. I just cut out a hole in the solid end, so that one of the adapters that fits on the pump can go into it. And BOOM you have an enlarged adapter for the end.
Mantap pakk abuuu!!🇲🇾👍
Can you give some details regarding the fridge mount? Looking for ways to safely do this with my truck in case I get into a bad wreck or something. I couldn't tell, did you remove that seat? I see online there are 40% seat delete kits but damn they are expensive. Love your content btw. Fellow cheesehead here who makes those long drives outwest as often has he can.
Would like to see the awning open
You will in a future video!
Thks, great content..
Interesting setup how you offset your Skycamp Mini to make room for the water tank and awning. I have the same Skycamp Mini and Billiebar setup on my Tacoma. I’m going to have to try your setup. Makes a lot of sense. Thanks for sharing.
just subd and hit the bell :) keep-up the excellent videos.
Thanks brother
How did the rock sliders turnout? What was the price? Nice truck.
I'm from Wisconsin also. Any Wisconsin or Michigan trails you run on?
Nice build ! Can you tell me what's the crate your using for camping and cooking stuff? Thanks !
Thanks! And they are the Roam adventure co rugged cases. Camping one is the 105L and the cooking one is the 82L
Does your roof top tent dust seal well during off-road run?
Great Video!! do you know where you found that magnetic grocery store trash bag holder?
Thanks!!
I added links in the video description! For both the holder and the magnet that I attached to it.
How much extra weight would you estimate you've put on to the truck? With its payload capacity did you find it sagging or did it hurt the truck more? Did you have to upgrade anything? I was thinking about getting one as a minor work truck, not anything crazy but may be a tool box and a few boxes and some buckets. But I can't afford two trucks.
I too am looking at a 2013-14 reinforced frame supercrew.
I love seeing trucks being used for what they are. With this I can have a small Home Depot cruiser and something for the dirt lol.
I would probably say I added around 500 lbs fully loaded with fuel in the rotopax, and water in the waterport.
Yeah, I mentioned in the video that I upgraded the rear leafs. Stock ones were shot as there isn't much to them anyways. But I threw on ICON Multirate leafs. They are amazing and really change the dynamic of the truck. Both on and off-road. They add to the payload capacity, and lift the truck a little.
So to answer your question. Yes on stock rear springs, it did sag a little. Now it does not.
@@jurassic_overland okay I appreciate your response. At the time it was during a noisy ride and I was missing some info so I'm not surprised. I apologize
Didn’t see the link for the mattress
Fixed!
How hard was the steering wheel swap?
Nvm, just noticed you have a whole video about it lol.
Glad you found the video lol
About the exposure thing, nobody cares unless they are into camera/photography stuff.
Can"t hear you?
lol he said a tree hugger , brother a tree hugger was another way calling somebody a hippie, or a environmental person