now create a label to label the label maker that says feed ok no hit escape. you can also set to small margin. nice of brother to set large margin as default.
I was doing that before, and now after I type my label info. and press "print", the feed option doesn't show up on the screen anymore. Do you know why that might happen? Thanks, I saw this comment months ago, and had been using this tip since, and now all of sudden it doesn't work :(
Wow. Just… wow. 😳 Please let this be a lesson to us all- I have no idea what it is since you’re video was just so educational (I think) and informative (I know I feel smarter). I can confidently say that I now have the knowledge of the internet’s brightest star! Thank you!
Thanks Sheena. Almost had decided not to get one of these printers because of the wasted tape that so many people comment on. thanks for the work around!
Thank you so much! I just purchased this exact Label Maker and it was different than Jennifer McGuire's and I couldn't figure it out. I am so happy I can use it and make the labels and not waste tape!!!!
Thank you SO much for the instructions on saving tape and printing 2 line labels! I could never understand the instructions and have wasted so much tape over the last 3 years! The tabs at the end were too long and because I didn’t know how to print 2 lines, labels were long. Thank you for taking the time to share!
Good video. Only my Brother, has a different type of set up. I love labeling my stuff. It makes my life easier. Especially for all the cell phone cords and other plugs. I now label every detachable cord with a label as what is for.
The video is bit too long. Lot's of room to make it shorter and straight to the point. However, thank you for taking the time to making, posting it and sharing the info.
I appreciate your thoughts on this.👍 I have a lot to learn on video editing and quality content creation is quite a tough challenge. Thank you for watching too.😊💕
As a newcomer to the Label Maker, I noticed upon first Label I made excactly what you meant by the tape wastage, I need to watch your video again until I get using it correctly right, I put in batteries plus purchased the Adapter as suggested in user manual. Good video Thank-you.
I got this same model from a second-hand store for $1.99 plus Hawaii tax this morning. I hope it works; I'm gonna cross my eyes. Much better than a Dymo labeler I got from Walmart. The Dymo has a terrible LCD display and too few options. : - )
Thank you for your comment. A lot of people are saying that the video is tooooooo long. So I hope it would help if I tell you to start watching on 7:30. That was the beginning of the proper steps to save tape. 😁💕
Yea at first I thought I had this model I paid 29.00 US dollars for mine it looks similar in color but mine has a square button on bottom right that has arrows going left and right and up and down. Either way it’s a great labeler and your tips worked with my model thanks.
Thank you for the video! Sis, can we save tape for h110? If you know how to do it, can you please make a video for it? between this machine and h110, which one is better and preferable?
Thank you for watching the video. 😊 I have never tried using ribbon tape but i know Brother has a specific labeller that can do that, here's a video i found: ua-cam.com/video/BjxDotdEUFw/v-deo.html
Too bad - it's Impossible to contact the Brother Company for any Support or assistance. Not good client-service at all. I like & Trust companies who stand-behind their products. Today 12/10/2020 - I actually wanted to make a purchase and I was put in a call cue and I was #47 with a 39 min Wait time ???
What if you were making multiple copies not just 1. Would it still work? Eg if you wanted 10 name n surname labels would you have to do that process 10 times even though you want the same text 10 times
11:12 But how do you get all the words centered for the first two prints so it looks even (like the hero arts/stamp&cut print)? The second line for the first two are left margins.
My Brother PT-H110 does not show the message "Feed ok?" instead shows "Please Cut" even when printing using Chain print. This adds the wasted space in between each label. Does anyone know how to fix that?
I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great ua-cam.com/users/postUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.
The brand of the plastic pouch is Avery Elle Stamp and die storage It comes in different sizes. Dito ko siya nabili, they are located near Greenhills: facebook.com/lastingimpressionph/
I believe the Tab function should do the trick? So type your first text, press Tab, then type your 2nd text, and so on...once done typing all your labels press Print
I've tried it and discovered that Tab function is fine however, only for limited characters. While this chain print function is best for creating as much labels as you want.💕
Hi! I checked my video and my labeller, and they do have AAA batteries. Maybe it varies depending on the country? Not really sure. I'm from the Philippines by the way. Thank you very much for watching!🙂💕
Sheena's helpful demo uses the Brother P-touch PTD210; it is powered by 6 AAA batteries or an OPTIONAL AC power adapter (AD 24). The Brother P-touch, PTD400AD; (and maybe other models) is powered by 6 AA batteries or an INCLUDED AC power adapter.
Hello Ms. Justine. You are the second person to ask me the same thing. I'm sorry triny ko ifigure out yan pero lagi talaga may lumalabas na "feed ok?" sa labeller ko. Kaya i don't know the solution to that.😔 Sana malaman mo yung sagot soon..
I can't thank you enough - - -this was a huge help!!!
This comment made my day!💕 Thanks!💕☺️
en espanol por favor como reparar cuando no detecta la cinta
i realize I'm quite off topic but do anyone know a good website to watch newly released movies online?
@Harley Anderson Flixportal
@Alfonso Carlos thank you, signed up and it seems like a nice service :) I really appreciate it!!
Thank you so much! hugs n kisses for making our labeling lives run smoothly.
Type Label Info, Choose Print, Feed Ok (No!) Choose ESC, Erase, Type next Label Info, REPEAT!
Thanks for your short concise instructions!
now create a label to label the label maker that says feed ok no hit escape. you can also set to small margin. nice of brother to set large margin as default.
I was doing that before, and now after I type my label info. and press "print", the feed option doesn't show up on the screen anymore. Do you know why that might happen? Thanks, I saw this comment months ago, and had been using this tip since, and now all of sudden it doesn't work :(
🙌🙌🙌🙌🙌
Thank you for sharing your knowledge, saved me a bunch of wasted tape! Much appreciated⭐️
Wow. Just… wow. 😳
Please let this be a lesson to us all- I have no idea what it is since you’re video was just so educational (I think) and informative (I know I feel smarter). I can confidently say that I now have the knowledge of the internet’s brightest star! Thank you!
Thanks Sheena. Almost had decided not to get one of these printers because of the wasted tape that so many people comment on. thanks for the work around!
FYI, the adapter for guitar pedals aka "9v - 1SPOT" works with most brother PTOUCH models.
Nice! I have a 1 Spot and a Brick Power Supply for my Pedals
Didn't know you could do two lines.
Amazing. Thanks.
Thank you so much! I just purchased this exact Label Maker and it was different than Jennifer McGuire's and I couldn't figure it out. I am so happy I can use it and make the labels and not waste tape!!!!
I love Jennifer McGuire's cardmaking and organizing skills!💖 Thank you for watching this video.💕
Thank your for sharing! Teaching is learning twice 2x. Blessings
Thank you SO much for the instructions on saving tape and printing 2 line labels! I could never understand the instructions and have wasted so much tape over the last 3 years! The tabs at the end were too long and because I didn’t know how to print 2 lines, labels were long. Thank you for taking the time to share!
Thank you very much for appreciating this post.🥰 I am so glad you find it helpful!💕
Good video. Only my Brother, has a different type of set up. I love labeling my stuff. It makes my life easier. Especially for all the cell phone cords and other plugs. I now label every detachable cord with a label as what is for.
The video is bit too long. Lot's of room to make it shorter and straight to the point. However, thank you for taking the time to making, posting it and sharing the info.
I appreciate your thoughts on this.👍 I have a lot to learn on video editing and quality content creation is quite a tough challenge. Thank you for watching too.😊💕
You are most welcome :) Hope you have a good day. Jay
videos are never too long.. whats known to you isnt known to the next person.. you can always FF, but when you come up short a beginner will miss out
Thank you for watching and thank you for your kind comment.💕
3:00 The reason we are here.
7:27
Thanks
Thank you
Nope she made a mistake at 3:00. Around 7:00 she does it right
You got hot nail polish. Love it
Start at 7:40 😊
What tape is everyone using?
I got this label maker like 10yrs ago and NEVER opened it. Now is the time, thanks for the video!
Gracias! Great video. Here in the US I bought it from Amazon for 38.00 and it comes with the adapter.
I think that’s a great buy! Mine didn’t include adapter. Thank you for watching the video. I’m glad you find it helpful.💕r
Thank you for taking the time to do this, Hello from Waterloo, Iowa
Thank you for watching.💕
So great! Can you share which font you used? Really like it!
As a newcomer to the Label Maker, I noticed upon first Label I made excactly what you meant by the tape wastage, I need to watch your video again until I get using it correctly right, I put in batteries plus purchased the Adapter as suggested in user manual. Good video Thank-you.
Glad to hear that you find the video helpful. Thanks for watching, enjoy labelling!💕
I got this same model from a second-hand store for $1.99 plus Hawaii tax this morning. I hope it works; I'm gonna cross my eyes. Much better than a Dymo labeler I got from Walmart. The Dymo has a terrible LCD display and too few options. : - )
This was a great help. Might you consider a tutorial on how to use label length; also margin? Thanks!!!
Wow! Thanks for your experimenting for our benefit! You're awesome!
Thank you for watching the video! I am glad you appreciate the content!☺💕
Thank you so much! It was driving me crazy that my labels had about an inch of wasted tape on either end! All fixed now!!
So glad you found it helpful. Thank you for watching.♥️
I’m confused 🤣 but I’ll try my best to keep watching this a few times again. But you have nice hands and nails 😊
Thank you for your comment. A lot of people are saying that the video is tooooooo long. So I hope it would help if I tell you to start watching on 7:30. That was the beginning of the proper steps to save tape. 😁💕
@@sheenacustodio hahahah I like long videos i don’t mind I’m here again 😂😂 earlier I was using my pt and I was wasting tape 😳 muchas gracias 😊
Thank you so much! You help me figure this out! You're the best!
I am happy to know that!💗 Thank you for watching.☺
Yea at first I thought I had this model I paid 29.00 US dollars for mine it looks similar in color but mine has a square button on bottom right that has arrows going left and right and up and down. Either way it’s a great labeler and your tips worked with my model thanks.
I'm really glad you found it helpful. Have a great day!😊💕
So great! Can you share which font you used? Really like it!
Thank you for this! I wish Brother would make this easier. Watch at 1.5 - 1.25 speed.
Thank you so much for making this video!
Thank you for watching.♥️
Nice one. The tape has a sticky part on the other side? To paste somewhere or together??
Thank you for the video! Sis, can we save tape for h110? If you know how to do it, can you please make a video for it? between this machine and h110, which one is better and preferable?
The best way to save tape: Buy a EPSON LW-PX300 :D
Thank you from the bottom of my heart 💕
Aww... 🥰 Thank you for watching.♥️
Thanks. I'm about to buy one
I just gifted my mom one of these, still cracking my head to figure how it works haha >
Is there glue on the labels?
Very helpful video, thank you so much!
Thank you, I’m glad you find it helpful.😊💕
What if we do t want to chain print but save on tape!!!???
Hi have you tried it on fabric?
Thank you for this video, it was so easy to follow!
I’m really glad you find it helpful.😊💕
SOOO helpful!!! Thanks so much for posting!
I am glad you find it helpful. Thank you for watching.☺💕
Totally confessing.
What the difference with brother pth 110?
Jump to @ 6:00 minutes to see the correct way to create multiple different 2 line text labels without wasting inches of blank tape.
It’s all how you have your margin setting set
Can use for different font for double marking?
Do you mean two lines? Yes. Just press the enter key.
This was very helpful, thank you!
I'm so glad to hear that. Thank you!☺💕
@@sheenacustodio Which model is this? Thank you
Hi! For some reason I am getting space before text. It is left aligned, and auto label lenght :(
THANK YOU!!!!!!!!
So expensive 2,550php? Amazon has it for $23 only. Thanks for the review!
Hi! It's 2,550 Philippine pesos, that would be around 50 US dollars.🙂
Thank you for watching the video.💕
Gracias por tu video estuve buscando por todos lados cómo hacerlo y NADIEEEEE decía, yo lo hacía como explicaste la primera ves y obviamente no salía.
Thank you for sharing !!!!
Thank you for watching!😊💕
First half is what not to do, watch this so you personally don’t waste labels
Mine doesn’t give me the option of “feed okay” what else can I try?
Mine too
Thank you for nice video just wonder can you print on ribbon tape?
Thank you for watching the video. 😊
I have never tried using ribbon tape but i know Brother has a specific labeller that can do that, here's a video i found:
ua-cam.com/video/BjxDotdEUFw/v-deo.html
The background radio is driving me nuts 😂😂 thanks for the video tho
🤣 sorry about that and thanks for watching.😊💕
Which model is this?
Niiccce!! Thank you.
Thank you for watching.♥️
Too bad - it's Impossible to contact the Brother Company for any Support or assistance. Not good client-service at all. I like & Trust companies who stand-behind their products. Today 12/10/2020 - I actually wanted to make a purchase and I was put in a call cue and I was #47 with a 39 min Wait time ???
How can I get the big litters
What if you were making multiple copies not just 1. Would it still work? Eg if you wanted 10 name n surname labels would you have to do that process 10 times even though you want the same text 10 times
Yes it will work.👍🏼👍🏼😊💕
Damn clever woman...
I like having label makers just to print random stuff. Not even to have it to be useful, lol.
11:12 But how do you get all the words centered for the first two prints so it looks even (like the hero arts/stamp&cut print)? The second line for the first two are left margins.
Press Font
Press arrows until you see Alignment
Press Ok
Then you will see your options--center, right, justify or left.
My Brother PT-H110 does not show the message "Feed ok?" instead shows "Please Cut" even when printing using Chain print. This adds the wasted space in between each label. Does anyone know how to fix that?
If I want to chain print 1 word like RED, not typing RED 9 or 10 times and have it automatically print. Is that possible? Thanks
Yes that is possible. 👍🏼👍🏼 There is a “number of copies” prompt before the you will be asked to click print. 💕
Where to buy po the tape? I got the same device ngpasabuy lng sa Amazon. I don't know if meron ba avail na tape here in Mindanao.
Hi! I see tapes in National Bookstore, Office Warehouse, SM Department Stores, and meron din sa Lazada.😊💕
I was having the same problem. Than k you
Thanks for watching. 💕
Mines doesn’t say feed ok it goes straight to please cut. What should I do?
Hi! I tried to figure it out. Every time I press “print”, it would always say “feed ok?”. I am sorry that I couldn’t answer your question. 😔
After u finish printing and you want it to feed. You press Shift and Feed/print button at the same time before cutting
You can use glue..
I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great ua-cam.com/users/postUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.
Scaredy cats? hmmmm.. Scared or Sacred?
San po nabili? Also yung plastic pouch for stamps po... Ipang gift ko po kay meses
The brand of the plastic pouch is
Avery Elle
Stamp and die storage
It comes in different sizes.
Dito ko siya nabili, they are located near Greenhills:
facebook.com/lastingimpressionph/
I believe the Tab function should do the trick? So type your first text, press Tab, then type your 2nd text, and so on...once done typing all your labels press Print
I'm going to try that! Thanks!😊💕
I've tried it and discovered that Tab function is fine however, only for limited characters. While this chain print function is best for creating as much labels as you want.💕
Is there any way to center text on the label? Does anyone know?
Yes,
Press Font
Press arrows until you see Alignment
Press Ok
Then you will see your options--center, right, justify or left.
@@sheenacustodio I had already found it 😀 but thanks anyway
@@jesterman1302 great! Thanks!☺
Technique was Helpful, thumb nails on the left is too long and quite disturbing. It looks awkward typing on the keyboard.
Or u can just buy aftermarket tapes they cost less than $3
Ung samin hndi nag aask ng feed ok? Kaya malaki pa din sayang. Panu b reset to?
Same model kaya? Naku hindi ako marunong magreset, sorry..
Turn off the stuff in the background.
hi di po ba pwede eveready battery?
Di ko pa natry pero sa palagay ko any brand of battery will do.
Thank you for watching. 😊💕
Great video Thanks
Thank you very much.😊💕
@@sheenacustodio mine just arrived today can't wait to use it
@@HollywoodColt enjoy!😁💕
Doesnt work dont know why
Uses 6 double A batteries not triple A just wanted to clarify great tip on saving tape!
Hi! I checked my video and my labeller, and they do have AAA batteries. Maybe it varies depending on the country? Not really sure. I'm from the Philippines by the way.
Thank you very much for watching!🙂💕
Sheena's helpful demo uses the Brother P-touch PTD210; it is powered by 6 AAA batteries or an OPTIONAL AC power adapter (AD 24).
The Brother P-touch, PTD400AD; (and maybe other models) is powered by 6 AA batteries or an INCLUDED AC power adapter.
Mime never asked me 8f the feeds okay, it just said please cut
👍🏻
Thank you for watching. ☺💕
mam bkt po sakin walang feed ok? pano po ulit ayaw gumana sakin nian
Hello Ms. Justine. You are the second person to ask me the same thing. I'm sorry triny ko ifigure out yan pero lagi talaga may lumalabas na "feed ok?" sa labeller ko. Kaya i don't know the solution to that.😔 Sana malaman mo yung sagot soon..
Justine Regencia you should choose thw “Chain Print” option
sa gilmore 3800 plus nabili ko
Ay ang mahal. Baka may kasama freebies?
no freebies included maam. sad haha
Oh sayang medyo mahal nga. But don't worry, it's definitely worth it, a good investment for organizing. Merry Christmas!🎄🎅