КОМЕНТАРІ •

  • @momspy1
    @momspy1 Рік тому

    Thank you! Bought this label maker 3 years ago, of course had no idea how to use it today, you saved me!!

  • @chriscalderon7566
    @chriscalderon7566 6 місяців тому

    Video was amazing! Thank you for the help plus the music you chose was so good that I had to leave a comment lol thank youuuuuu!

  • @johnc3601
    @johnc3601 2 роки тому

    Nice job. Very informative !

  • @kymwilliams7356
    @kymwilliams7356 Рік тому

    I have had mine for quite a few years... and afraid to even bring it out and try it. You made it look so simple... should have looked you up 2 years ago.. I'm going to have fun. thanks

  • @beetlejuice4822
    @beetlejuice4822 3 роки тому +1

    Very helpful video. Mine’s arriving this Friday can’t wait

    • @TheNailNerdJournal
      @TheNailNerdJournal 3 роки тому +1

      So happy it helped!! 💕 I’m still loving mine!! I hope you enjoy it as much as I do!!

  • @Salisbury2015
    @Salisbury2015 2 роки тому

    Very informative and helpful video, thank you!!

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      So happy to hear that!! ☺️ thank you for watching! 💕

  • @bigdennis21
    @bigdennis21 3 роки тому +4

    Excellent video! Thank you for going into such great detail too! Mine arrives next week and I plan to put it through a workout.

  • @TheStacey474
    @TheStacey474 5 місяців тому

    Thank you for this tutorial!

  • @katjacoby
    @katjacoby 3 роки тому +1

    Excellent video! Thank you!

  • @sarahward7011
    @sarahward7011 3 роки тому +4

    This was a great help thanks 🥰🥰

  • @lukeandchitraswygard8567
    @lukeandchitraswygard8567 Рік тому +1

    Can we plan multiple labels and then print all at once? For example, type in onions, potatoes, canned goods, sauces and then print all 4 labels at one time? It takes quite a while waiting for each label to print if I have to do them just one at a time.

  • @zaumka99
    @zaumka99 6 місяців тому

    Sorry for a stupid question. The printer came with 0.94 tape. I was hoping to print more narrow - say 0.47 inch - labels. Namely, that the printer will just cut them horrifically no make more narrow, just like it cuts it vertically before each new label. But i could not make it work. Every time i say more narrow width, i get the error message that the width i selected does not match the tape i have. Is this correct? I and stuck with same 0.94 width labels? Unless i buy more narrow tape?

  • @linnmoonlock5251
    @linnmoonlock5251 3 роки тому +1

    Do you know if you can chain print on this to save tape?

    • @TheNailNerdJournal
      @TheNailNerdJournal 3 роки тому +1

      Yes you can. There is an option to cut the last label in the print settings. You turn it off and it will chain print. It gives you instructions on how to cut the last label or just turn it back on to cut when you are ready.

  • @mason34franks1
    @mason34franks1 2 роки тому +2

    I just bought some white print on lime green label roll. Can or how do I change the color to the pastel purple/black? How can I print l label color without buying colored tape? Do I have to buy different colors to change the color layout? LOVEd your video love Ms Mason

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      So glad that you liked the video! I think the only way to change the color is the tape. The actual machine doesn’t have ink. It comes from the tape cartridge. They may have some different tape options at other stores but I haven’t seen too many on Amazon.

  • @marilynnthornton
    @marilynnthornton 2 роки тому

    Does any one know how to print words or designs continuously on a label the length you pick? I tried it with the ribbon style. I can do it with that, but I can’t seem to be able to put a frame on the label with the text. I’m using the 94mm size (the option works with ribbon or tape even though you don’t see that option.

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      You can print a label from .99 to 19.64 inches. You just have to set the length that you want and then you can copy and paste the text or designs you want over the length you set. It should print the frame over the length that you set as well. Just chose whichever frame you want. If you want a small frame over the particular text or design you want over and over then I would chose your design within a certain length then print the design without the cut option chosen on the print options and just print it over and over until you get it the length you want. Then you can reselect the cut option or double tap the power button to forward the label to the cut mark. I hope that makes sense. Im not entirely sure I’m understanding what you are wanting to do.

  • @aryevtamvanov1010
    @aryevtamvanov1010 2 роки тому

    If I installed this printer on my desktop PC, can I used it to print from MS-Word, web browsers and other apps ?

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому +1

      It prints from its own application and I’m not sure if it’s able to print through other applications/programs. I guess if you could get the printer to install as a regular printer it would be possible but I have not tried it. The tapes are not very wide so I’m not sure how much you are wanting to print from it but it wouldn’t be able to print a whole lot on the tape. Also the only way I know for this printer to be installed is through Bluetooth so your computer would also have to have that capability. Hope that helps.

  • @mdrijwanrazzaqmatin2503
    @mdrijwanrazzaqmatin2503 2 роки тому

    hi, can you print iron label maker for clothes with this?

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      I found these labels here that you can iron onto clothes so I guess it just depends on how much info you need to put on the label. It only comes in sizes up to 12mm wide
      amzn.to/3LrJi8N

  • @brucemiessner735
    @brucemiessner735 2 роки тому

    nice review, do you know if you can import other symbols?

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      Thank you for watching! Glad you liked it 💕 You can add any symbols or clip art you want by saving it as a photo on your phone. Then they have any option to add photos to the label. I haven’t done it so I’m not sure how well it works but if it’s not too detailed it should work fine.

  • @Caledoniachicdesigns
    @Caledoniachicdesigns 2 роки тому

    How do you reduce tape waste. I have huge gaps between labels

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому +1

      To print multiple labels at once without getting the big space between you have to turn off the “cut last label” option. In the printing settings right before you print go to cut options and turn off “cut last label”. There is also an option to print the cut line so you know where to cut it to get your labels sized right. This way you can print multiple labels at once or multiple labels back to back without getting a huge space between them. Then once you are ready to cut turn it back on or if you forget to turn it back on, just double tap the power button and it will bring the label forward to the cut line. I hope that makes sense. Sorry it’s not in the video. I figured this out after playing with it for a little while.

  • @marilynnthornton
    @marilynnthornton 2 роки тому

    How do you do repeats continually on a tape?

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      I’m not sure if there is an option to print the same label multiple times. You may just have to kept hitting print over and over. To print multiple labels at once without getting the big space between you have to turn off the “cut last label” option. In the printing settings right before you print go to cut options and turn off “cut last label”. There is also an option to print the cut line so you know where to cut it to get your labels sized right. This way you can print multiple labels at once or multiple labels back to back without getting a huge space between them. Then once you are ready to cut turn it back on or if you forget to turn it back on, just double tap the power button and it will bring the label forward to the cut line.

  • @whobutni
    @whobutni 2 роки тому

    What is the smallest font size you can select?

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому +1

      5 point is the smallest setting.

    • @whobutni
      @whobutni 2 роки тому

      @@TheNailNerdJournal thanks for the quick reply! Does the 5pt font come out clear and sharp? I am trying to print small stickers to put on my camera gear

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      @@whobutni I think it depends on what font you use but I’m sure you could find one that would work. I haven’t printed anything that small but I have noticed that some of the fonts are more legible than others when doing smaller print.

  • @GamingGadgetsTechnology
    @GamingGadgetsTechnology 3 роки тому +1

    You can download the app prior to connecting the label maker but you cannot type anything in the labels or see the fonts until you connect a label maker. At least that's my experience...

  • @TheTrueKailash
    @TheTrueKailash 3 роки тому +1

    hi, i'm considering getting this. are you still happy with it?

    • @TheNailNerdJournal
      @TheNailNerdJournal 3 роки тому +1

      Yes, I still love it! It works great and I haven’t had any problems with it.

  • @heidicavagnaro811
    @heidicavagnaro811 2 роки тому

    Can I pick a color background

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      They have colored tape you can purchase like the ones here but the tape is what has the background color and ink so you have to change the tape to change the colors.
      amzn.to/3hr4vBX

  • @studiotwentyone
    @studiotwentyone 2 роки тому

    Can you print your own custom logo with this?

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      There is an option to add an image. The largest width is .47 inch / 12mm so if your logo fits within that width it should work.

  • @TheJoannalicious
    @TheJoannalicious 2 роки тому

    Can you create barcodes?

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому

      There is no way to create a barcode in the app but you can upload pictures to add to your label. So if you have an app to create a barcode, save it as a photo or take a screen shot, then you can add it to your label. Hope this helps! 💕

  • @_bbie
    @_bbie 2 роки тому

    Which version is this? P300 BT or P710 BT?

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому +1

      This is the P300 BT

    • @_bbie
      @_bbie 2 роки тому

      @@TheNailNerdJournal Ok. This product only works with smartphones/ipad apparently. Doesn't work with old iphone like i have :) Too bad

  • @ramblinvann5654
    @ramblinvann5654 2 роки тому

    Wish i knew what a Swatch is/was

    • @TheNailNerdJournal
      @TheNailNerdJournal 2 роки тому +1

      Lol. Like a paint swatch but these are nail polishes and acrylic. Each swatch label is about 2-3 inches if that helps at all 😁

  • @barryswatman2398
    @barryswatman2398 8 місяців тому

    Thanks for the information
    The background music is so annoying 😂. Please please just no😢