Avet JX Raptor Reel Service
Вставка
- Опубліковано 27 бер 2015
- Basic service of an Avet JX Raptor 6/3 reel. The entire operation takes about 12 minutes with simple tools and supplies. See my avatar for a photo of this reel after besting a jackpot 67# bluefin tuna using 60# test on the Royal Star (thanks Blake).
- Навчання та стиль
Killer videos Mark! With all this stay at home stuff...you gave me the confidence to do these myself! Thanks Chuck
Just so you know, that driver comes in a hex version too (can find on amazon). It's handy to have both for the bit selection. Thanks for the video - super helpful to service my new JX
Raptor.
Nicely done Mark, very helpful to a lot of folks.
Hello Mark, thanks for the video! It will help me service my own reels. Looking to purchase a Megapro, but do you recommend the manual screw driver or the ratcheting one?
I use the stainless model that does not ratchet.
Oh boy I just found this gem. I just bought a used JX 6/3 raptor last year used it twice then shutdown. This is either going to be the greatest video ever or the worst.
Service it before any trip after a long rest.
Heard the bearings go out on these reels
I have ten+ year old reels with original bearings. I fish hard!!! People who don’t service their reels have issues. Service yours!!!
Only if you apply stupid drag pressure or don’t take care of them.
Will the small can of 3 and 1 oil work for these reels??
Awesome video by the way. Very helpful 👌
I don’t like that oil for salt water applications. Try Bluewater Tackle for GetSome Oil.
@@markmayo2853 ok thx
No
No
Great video thanks Mark, really looking forward to handle removal video when you have time as I have a new t-bar handle to install on Jx raptor but can't work out how to do , happy fishing
Thanks for the video, That was a huge help.
Thanks, great video! Just what I needed. Possible for a complete breakdown video of the JX 6/3 Raptor in the near future?
As soon as my helpful nephew wants to make another one, I will try a side plate service which removes the handle, gears and bearings.
You said that a year ago. Is it coming out anytime soon?
Joda Cokol
I moved this year to a new home 150 miles from Long Beach. I am just now getting settled. You can expect one.
6:08 I noticed the gears popped out really easily. I feel like mine are jammed and I can’t remove them on Jx 6-3 mc raptor. Any suggestions. I did this service (reel is less than 2 years) plenty of oil/grease, just dirty. After service, high gear feel like it’s grinding on down stroke of handle when reeling. Any suggestions?
Try cleaning the teeth inside with brake cleaner. Clean that stuff with an alcohol and grease again. Hopefully it will help
Some are tight, some not. Always grease the insertion hole to help get them out next time.
Hey Mark,
Thanks for your time and effort, you have saved me tons of both. I have several AVET single speeds and know how to break down the handle to replace the pinion bearing. These seam to need replacement occasionally. Can you make a video on how to do this on a LX 2 speed?
You don't remove the handle and the main gears?
Only when the bearings are bad. Mine almost never go bad. I’ve had to with two reels in seven years. I use tons of drag too!
Not every time - not needed.
Thanks Mark. Your Avet videos are greatly appreciated. Is there any chance you could do some on the Makaira SEa reels?? Thanks again, Patrick
No sorry
thanks for such useful videos , one question i have does all raptors are basically the same as the jx, how you service it,, thank you again for taking the time to do the videos
Yes, all raptors are the same except you have to deal with the strap lugs on HX Raptors.
wow thank you for the quick respond :)
Great video Mark. Just wondering if the magnets can be removed on the MC Cast to gain better freespool? Seems like all the Raptors from the SX to the JX come with the MC Cast which IMO does not freespool very well even on the lowest setting. I have an HX Raptor without it and it freespools very well.
I agree but just fish the reel as is. It performs on the ocean as you want and I get the bait out there.
I don’t think the magnets can be removed
I would like to add a power handle to my Raptor JX 6_3. is there anything I should be on the lookout for when changing out the speed housing and the actual arm itself?
Check my speed shifter video. Be careful
Hi there,
My JX two speed is cranking freely on both directions. Lever is engaged and even locked but made no difference. Any advise will be appreciated. Thanks.
Gear upside down
Drag gear is either upside down or you installed the dog upside down. Easy to fix. Check for dog action BEFORE you close up the reel and reattach the right side plate.
Any changes? Mine is a new reel
Not to my knowledge. I too have a brand new MXJ Raptor. Same
Not much. Look at Raptor to see how to start. Rest is the same.
Great video can you please do one on the avet sx reel would be helpful thanks
It’s there
could u illustrate or describe how to change raptor reel handles as for a "power" upgrade?
I will show a handle removal soon.
have you ever worked on an accurate reel or valiant ,if so do you believe those may be better constructed like perhaps with beffier gears ? thank you in advance great video!
No. I stick to reels I have and know. Sorry
Mark , what does avet have that compares to the penn torque 40narrow lever drag , in line capacity and gear speed..Thanks!!
I am not an Avet insider I just buy them, service them and use them. I think the either the stock JX raptor or narrow HX raptor should be a match for your request. Save money and buy the Avet and easily service it yourself.
JX Raptor fishes 50-60 easily.
The drag washer, you said you greased it.. I read on a forum of some guys doing the same and some guys saying that's a no no, I am confused as why to grease them or why not to grease them. What is the benefit? Could you please explain?
Grease it as per my suggestions and skip the doubters. It works with every Avet I have.
Grease it
Do it!
hey does the raptor make noise when you shake it. could it be the mc because it's close to the spool
I just tried my two JX raptors and no noise. I leave Monday on a 10 day on the vagabond.
+Mark Mayo could it be beville washers they look odd. but can't find schematics
+Mark Mayo imagine this is the spool. l-----l it moves slightly left to right when I shake it makes like a little thump. have nice trip
Is there much difference when maintenance on an MC reel?
No
No difference but G2 are newest and better
None
Is this process the same for an mxl?
MXL raptor yes, regular MXL not exactly...
Yes
Yed
You do this after every trip?
Yes I do. I am sad to report that I only get to sea four times to six times a year. I do think that leaving salt water in any reel over time does it in. After my last 2 day I managed all three reels in 30 minutes including setup and cleanup. You get better each time. My reels look new inside and always perform as I expect them to do.
Yes
does it have a Thrust Beaeing?
No
No
No
Avet reels are poorly made I buy one and a screw the handle fall out
I have 12; my group has over 60. They are well made reels that always work if maintained properly. Sorry you don’t agree.
BS. They are great