Відео

I agree. The sliding windows is a nice feature to have. A taller blind would definitely nice! Thanks for watching bud.

About $2800 not including the arrows and release.

Thanks bud. How did he lose it? Did he forget to swing up the retaining bar? I tried to pull the release out myself with it secured property and couldn't get it out of there. I also carry a spare release in my bino harness.

@@MasterofNone365 ya I'm sure that was it. Got a bull in range and looked down to grab it and it was not there. Had to watch a 6x7 walk past him. Good on you for carrying your backup. I'm a wrist strap guy for this reason even though I shoot a thumb release

@@Wildarkansan Man that sucks. I really like shooting with an index release but when I'm hunting with it, I'm constantly banging against my bow when I'm switching hands as walking through brush or just closing distance. After that, I switched to thumb buttons. Good luck this season!

@@MasterofNone365 you too!

@@reubenmaggard4980 it’s just an aluminum angle you can get at a local hardware store. I specifically got mine at Home Depot. The height was about 1/4” but I’d suggest getting something a little taller if you can. I still get stuff falling behind it at that height. Thanks for watching!

Thank you!

Thanks! I dig it too!

@@americandirtrider7662 haha. If you throw enough at the same time you might get lucky.

BS on what?

@@MasterofNone365 hitting those small circles so far out. I’m basically the best shooter in history and I’ve never hit those at 80yards. 😉

@@omarcurbelo5342 🤣

Thanks brother! I appreciate you taking the time to watch! haha. I shaved it down as much as I could. I almost cut out everything before and after the actual backpacking trip but figured I'd leave it in for my own memories.

@@anguspham2051 I never really do. Lol

Thanks bro! It was fun filming and editing this one. I know! There's a dude walking around Denver looking badass and being chased by all sorts of women wearing your sunglasses. lol.

Thanks brother! Hope to chase some big game in the mountains with you soon!

Good question! I like to match the back to the spine. The tallest point of the vanes are closer to the back so by aligning the back to the top of the spine, you keep the vanes on the bottom in the right position to not make any contact with the rest or possibly the cables.

Thanks! Will do a video soon for my final setup for elk season!

Thanks bud! It's definitely my favorite bow so far. Those are great colors so you definitely can't go wrong with either. The nose button is also great for turkey season, I've found. I pretty much wear a face mask the whole day so the nose button was great for feeling another reference point. Without it, I can't really feel the string unless I push my nose harder into it which is bad for accuracy. Thanks and good luck this season as well! Let me know if you post any videos of your rig. I have a few videos of me shooting on here that I uploaded recently. Here's one: ua-cam.com/video/Ta-3gR5j-TE/v-deo.html

@@MasterofNone365 Hey bro, didn’t realize this was your video. We’ve talked about Nose Buttons before. Checked out the video link you posted to me. Your bow is even better looking when it’s being shot. Cannot wait to get mine.

@@coreycallahan7443 oh cool! haha. I'm still getting it dialed in for elk season so I'll be putting out some more videos of that. Testing the Micro Hades and they fly nice!

You won't be disappointed!

@@notchcoupeful Jimmy is badass! Super nice guy and did a great job!

@@coreycallahan7443 thanks! It’s been about 2 years since this video and I’m still working on it lol

@@MasterofNone365 I’ve been shooting for around forty years and I’m still working on mine every time I go to the range. I will say that the Bowmar Nose Button has really helped me in keeping my anchor point very, very consistent. I’m not on their payroll but I recommend them to all of my clients.

@@coreycallahan7443 I love the nose button! I have them on all my bows now! It made a big difference once I started shooting with a thumb button.

@@MasterofNone365 I have them on all of mine as well. I can draw and anchor with my eyes closed and when I open my eyes my sight is perfectly centered in my peep every time!

@@jamesseed1752 thanks for watching bud!

The beef patties are just seasoned with salt, pepper and garlic powder. The caramelized onions didn't need anything other than olive oil so it doesn't stick to the cooking surface. For this one, I used Swiss cheese. As for the condiments, I used a sweet and spicy mustard that was premade in a bottle. Hope that helps!

@@MasterofNone365 sounds very tasty. Thank you

@@jarogugol5187 my pleasure!

@@averysoutdooradventuresllc thanks bro! I need to figure out how to fix my double vision issue. I’ve been struggling with it since I started shooting a compound.

@@bobby4116 the grip was ok. There are aftermarket grips that you can get for it. I now have an 80# Alpha X 33 with a grip from Black Claw Grips and really like it. It’s thinner on the sides and flat at the back. I’m not sure if he makes one for the Ventum but you can ask. facebook.com/blackclawgrips?mibextid=LQQJ4d

@@MasterofNone365 I appreciate it! Best wishes for the channel.

@@MasterofNone365 one last thing, what made you choose the Alpha X over the Ventum? Thanks again

@@bobby4116 thanks bud! The Ventum is an older bow now. The Alpha X has more speed, better balance and shoots nicer. You could definitely save a ton of money getting the Ventum now though.

@@bobby4116 it definitely takes time to get use to. I notice the same thing if I slowly squeeze to the click and stop immediately. For me, I would squeeze to the click pretty fast and then take my time pulling through with back tension and it would go off.

Thanks! I'm sure you can splice them into your bed lights if you know what you're doing. The rock lights do come with a really nice switch as well if you decide not to run them on your bed light switch.

@@americandirtrider7662 haha. It’s my stepdad’s. Pretty cool little jeep.

@@ryoung6725 thanks! I appreciate it!

I don’t think so on mine. There’s actually a small gap big enough to stick the tips of my fingers under it. That’s good to know though if I ever get a different shell for some reason.

Yup!

@@MasterofNone365nice. Was there last sat/sun. Visiting from Texas

@@loudogfotog oh cool! It's a beautiful range! Glad you got a chance to shoot there.

I had it lifted 2" before I upgraded the wheels and tires. I got the 16" wheels, 0 offset. I think it gives my truck a nice stance. Wider than stock but not outside of the fenders. Tires are LT265/75R16. No rubbing at all. They're basically 32" tires. If I went up to 33" I'd have to do a cab mount chop and some modifying of the wheel wells like everyone else does. Thanks for watching!

@@MasterofNone365 I appreciate your quick response. I'm still shopping and hopefully I have my Taco facelift next month.

@@aloyscubs66 That's awesome man. Enjoy!

Where do you normally shoot?

Haha. Now that the pig hunt is done, I have to start preparing for a deer hunt next month.

That's awesome man! It was a fun shoot and we had amazing views. Bummed I can't make it to either this year. Have fun bud!

They worked great. I didn't really see the crazy parachuting that everyone keeps talking about. If I got any parachuting, it wasn't any different than what I get from my regular helical when I get a little cross wind. It wasn't hard to match up sight tapes with it either. I think it all really depends on your entire arrow build and what poundage and draw length you pull.

Awesome, good to know. I noticed a little drop from 2 to 2.25 with the ez fletch. Jw your experience. But yea ive noticed even if i change arrow set ups, if they're the same weight or with 5 grains or whatever, i don't have to adjust my tape either.

@@justinmahan7860 oh that's interesting but that makes sense. I guess I don't shoot well enough to notice a difference. I have 3 arrows with 2-3 degree helical and 3 with the hard helical and they group together at 80yds. I personally didn't see a difference at all in drop. I'm currently shooting 78# at 29" and my arrows are about 477grains. I just got back from a pig hunt and don't have any hunts planned until mid/late July so I'm going to max out on the limb bolts, build some more arrows and retune. I should be pulling somewhere around 81-82# so I doubt I'd see much of a difference. I'll revisit the comparison again between the 2 and film them in slow motion to see if they fly different. I've been hearing that some people get parachuting at 60yds but I've never seen that even when I was shooting 60#.

​@MasterofNone365 i should've specified 2" vanes to 2.25" vanes. Not offset. Sorry. But yea i leave mine on 60lb for comps and i haven't had any parachuting, only a little drag. It'll end up like 6" lower sometimes. But i shoot 368 gr with 100 up front. 28". 289 out of one bow and 272 out of the other. Both on 60lb. I getting ready to fletch 1.7 pro max and 1.75 xvane. I think theyll do great in the mini jig

@@justinmahan7860 np man. I understood you. But I'd be impressed if you knew how to do a 2"-2.25" offset. lol

It's an arrow square made by G5. It's badass! Thanks for watching.

@@MasterofNone365 I gotta pick one up asap!

@@TannerJPrice if you don't already have an arrow saw, I'd definitely look into the ModSaw. That thing has a saw, an arrow spinner and arrow square all in one. If I did it all over again, that's what I'd buy.

@@MasterofNone365 bro, that sounds so money! I’ve got the DeCut arrow saw and pine ridge spinner, I wish I knew of the mod saw when I started loading up!

Thanks man! I drilled mine in but if you run T-slots on your work bench, you should be able to use that instead which makes it easier to take it on and off. I need to do that sometime.

@@MasterofNone365 appreciate the info, brother! Keep up the great vids!

@@TannerJPrice Thanks bud. You too! Just subbed to your channel.

@@MasterofNone365 appreciate you, brother! Excited to follow along w yours as well!

Thanks for watching! Here's a link to the video when it was installed and all the stuff to get the products are in the description: ua-cam.com/video/Y2Ah7YsAKfs/v-deo.html

Is your's from Millercat? The bolts literally don't go any further than that. That's how I was able to torque all of them to the highest spec from the instructions.

@MasterofNone365 yes mine is a millercat. Flushed with this special screws.

@@hooknram Idk. Those are the screws that came with mine and they aren't flush.

@MasterofNone365 I'm gonna try and post a video maybe tomorrow on my channel so you can see. No cap. Wish I can post a pic to this thread and show you

@MasterofNone365 I took a short video, I'm gonna post it.

Thanks for watching!

Haha. They don't but that would be cool though!

@@MasterofNone365 next project I guess. Haha

@@americandirtrider7662lol. For those raves in the desert.

@@MasterofNone365 If you build it, they will come.

@@americandirtrider7662 haha