Відео

@@legend1506 do the same thing, listing the processes in order of cpu usage, and find what’s using all of that. Feel free to join my discord if you need any help, since we could do a screen share there. discord.gg/DEhgmrky

@@musicacoverlive3086 I haven’t tried using a power bank because the camera can’t charge while recording. That’s only an option for streaming the camera via BT/wifi or hdmi. I’m not sure if you can use a power bank to power it if there’s no battery installed. The battery does generate a lot of heat though, so I could see it running longer without overheating if that were an option. Recording in 8 bit instead of hdr pq should decrease heat since the bit rate is about 120Mbps instead of about 170Mbps, which means less processing power, and less memory bandwidth used, though I haven’t tried it. Either way, I can now record 4k24 hdr pq for the full hour at a time, which is the software limit, though 8 bit may allow you to start a new recording immediately without risking overheating within the next hour.

Thanks for elaborated answer. And what about the ulanzi fan in the back?

This can be a cold power solution: ua-cam.com/video/g1CI4muSu_Y/v-deo.htmlsi=7P_13AT3v79FTn0q

@@musicacoverlive3086 with the thermal pads in place, the heat is transferred well to the rear cover, so I suspect the fan would work well. Without the pads, I don’t imagine it would make much difference. Maybe I’ll order one just to test it.

So it can be good idea to combine all solutions: Thermal Pads Ulanzi Fan in the back PowerBank with PD-BX dummy battery Record 8bit 420 ipb lite 60mbps Keep camera in shadow under umbrella Turn camera off while not recording

@@llamallama9878 you’re welcome. I did post the video where I installed the pads, but it is pretty low quality and long. I’m sure you can scrub through it and understand how to do it.

@@llamallama9878 here’s the video: ua-cam.com/video/jXHUDDCwbGo/v-deo.htmlsi=iSYlIgLl5u2w15ZC

@@NoVanity1 try playing it right out of the monitor/tv, or plug a headset into your pc to see if that’s still the case. If not, it’s the audio device you’re using.

@@yashesvi-raina at 1080p60, it can record until it reaches the 1 hr time limit. The same is true for 4k24 hdr pq, unless its in the sun. 4k30 hdr pq can do about 45 minutes at 23C, but another useful change is that it cools fast when you turn it off. If it overheats, turning it off for 5 minutes gets you maybe another 15-20 minutes of record time.

@@Bunta1987qwerty thanks

@@destian30 I’m glad to hear it!

@@marcospcury I got vnd filters from them. There is some color shift and vignette near the limit, but they’re good for the price.

@@doner7712 nah, just raise the min game clock frequency

@@dalemettee1147 yes, I should have mentioned that

@@kjogorman3472 I didn’t know it had music. TLDR, run it as administrator.

@@dalemettee1147 I’m not sure what you mean, but I can record a full hour at 4k30 hdr pq while indoors at 75F now. It has been a big improvement in my case.

@@Bunta1987qwerty What I meant was is ther enough room between the PCB and the metal shield for the thermal pads?

@@dalemettee1147 yes, 2mm on the chips, and then 1mm on top of the shield.

@@3bdllah_29 it doesn’t allow you to transfer wirelessly, so you have to transfer it via usb or a card reader. It says so in the manual, I think. This is only true of hdr pq if I remember correctly.

@@SolidArc91 it really only has 3 fan locations, since the front has no exposure. Two bottom intake, and one rear exhaust, though the psu also exhausts.

@@Shoe89 ua-cam.com/video/jXHUDDCwbGo/v-deo.html

@@NotsoSlayer it was much worse at launch, and people had mixed results. The point of the video was to show that even with a fast cpu, you could be stuck waiting a long time.

I’m glad it worked for you!

ua-cam.com/video/jXHUDDCwbGo/v-deo.htmlsi=goHDmFNCJWwzND-d Sorry about the poor quality video. I meant to redo it, but haven’t had time to

Thank you. I guess it would be both observant and reflective with a liminal setting. Some of the shots are done so it looks like you're a static observer viewing from a distance, and some of it is close and in the point of view of the subject. The emptiness (even in traffic since traffic feels isolating), along with the brutalist architecture of parking lots and school buildings could be considered liminal spaces. I'm glad you enjoyed it, though I was thinking of redoing it with some minor timeline changes and some film emulation. I didn't use film emulation this time because I wanted it to be a showcase of the camera's optics. I'm also working on a full short film, which my latest video is about. I hope you'll check it out once I finish it, which will of course take a long time.

I’ll make a video about it soon and post the link here.

It was also the only thing I didn’t like, but I take everything apart, so this was just fun for me. Unfortunately many cameras from all manufacturers have overheating problems when video recording near their highest settings. There are Sony cameras with much better dynamic range, but they’re also several times the price of this camera. The rf lens selection really is too small, and I don’t like most EF lenses, so I don’t want to use an adapter. I’m mostly interested in cinema lenses, so it doesn’t really matter to me, but for photography, the options are slim and expensive. I hope you find the right camera for you.

@@Bunta1987qwerty I have zero issues taking things apart. I just don't want to take apart something that has a warnty. As for a camera. I'm kinda looking at different cameras in the 1500-2000k price range. I'm kinda torn between a modern camcorder. Cannon xa60 for like 1700 bucks has caught my eyes. No lens to worry about, fast apture, can run till it runs out of memory. I'm also looking at some cinema style cameras. Like the Sony fx 30, or a black magic 4/6k. They will be studio cameras only. So I can buy a good sigma prime, and be set. I plan on keep the r50 though. It's a good camera. It takes great pictures, snd I also want to get a sigma 18-50 once that drops next month. Then later in the summer a 50-100mm f/2.8 ef lens sigma, and those lens should cover what I need for photo work for now.

Try it out and let me know. Some people have said it works on other cards too.

ua-cam.com/video/jXHUDDCwbGo/v-deo.htmlsi=4OnM0Hf3zsH9phGR I get the full hour at 4k24 hdr pq with the arctic pads. I had the thermalright pads before, but they weren’t as good, and they’re a little more stiff.

I’m glad it helped you! I can’t believe they cheaped out on something so easy.

@@Bunta1987qwerty Also just did this on my R7. It's not known to overheat nearly as bad as the R50, but I have seen the temperature warning come up a few times. There's not as much space for thermal pads but I was still able to get 2mm on the CPU and RAM.

@@DevonianPlays remember the goal is to get a heat conductor to make contact with the chips all the way to the external cover so the heat has a way to shed. The best case scenario would be filling the whole internal space with a heat conductive medium like thermal paste (or using liquid cooling), but that’s unrealistic. Another great thing about this is that a rear fan like the one from Ulanzi would actually be much more effective once you’re getting the heat to reach the rear cover.

It shouldn’t be. The shaders should be cached on your drive, and you should only need to do it again if you update your drivers or they update the game.

@@Bunta1987qwerty hi, thanks for the answer, i was searching for info and the thing is i updated the graphic card drivers so that's what happened. i didn't know that might cause it.

I used a tripod, but stability is pretty good with the rf lenses and “advanced” IS in the settings. It does crop when you use IS though, so you’d have to shoot with a 35mm to get the same view as with the 50mm.

That’s Radeon software, but GeForce has a similar thing, or you could always use MSI afterburner with rivatuner.

No. The front really isn’t doing anything since it’s blocked off. There’s a miniscule side vent, but it only serves to offset a pressure imbalance. Even with the rear exhaust, the psu exhaust, and 2 bottom intake fans, the overall pressure is still negative, so it intakes from the side vent. I taped it off to avoid dust, since there’s no filter there. Still, I’m using a 5950x at 4400 MHz, and an overclocked rx 6800 now with no overheating. Max 78C on the cpu and 86C on the gpu hotspot.

@@Bunta1987qwertyIf I have 3 fans, would it be a good idea to make the rear intake and the front exhaust? I currently have all 3 intake

@@SolidArc91 you need to have an exhaust, and I’d suggest the bottom 2 to feed the gpu

Thanks. 4k24 hdr pq. Check out the hdr version; it’s a better representation of the actual quality: ua-cam.com/video/BKekCKju87g/v-deo.html

Yeah some people have had a really poor experience with this card, it seems. Make sure you have the chipset drivers installed, and remove old video drivers with DDU especially if you upgraded from an nvidia card.