Відео

I always wondered who made those glory holes.

My recommendation to anyone buying an X-Carve...leave it pack upin the box...UNTIL you have built or sorted out your work surface... I built a folding work bench similar to one I saw here on you tube...er... don't fix it to a wall of your garage or house (if your workshop is under the main roof).Mine is on lockable castors and is only 600mm wide when folded. Once you have built your work surface, you then have a solid flat surface on which to build your X carve... this allows 2 things... first a greater deal of accuracy on your initial assembly second by building your work surface first you don't have to find a 'safe' spot for your X carve to avoid damage while you are building it.

Great video! After Hurricane Helene, it’s time to invest in a generator for back-up power. Hotels are expensive and it sucks when your food spoils. Glad my insurance covers the food but I’d rather have a plan in place vs suffering without power.

Get yourself an M12 caulk gun, or something similar for these big jobs...you will thank me later👍

only reason im considering a champion is because i heard westinghouse customer service is trash.

Thank you. I just ordered one this morning

No easy start? Is it needed?

Allen Shirley Clark Elizabeth Rodriguez John

Awesome video man! i ended up getting a 14k BTU unit from Della, it does both heating and cooling, i was going to drill a hole through the brick to vent, but i didnt want to go through what you did. I ended up veting mine through the ceiling and into the attic, the installation location is on the very end of the house where the big vent for the attic is, so it worked out. I converted my garage into a bedroom, so not having A/C wasnt an option in south alabama. First day of the install, the garage was 99 degrees, it took about 6 hours to get it down to the high 70s (still no insulation yet) but once it got to a reasonable temp, the highest it gets is 85, and with the unit running, even at 85, its very comfortable. Overall, its worked pretty well!

I bought mine almost a year ago. Someone somewhere on one of these videos told me that the pull start didn't work with gas, only with propane. For some reason I just assumed they were right. But a few months ago when trying to start it (with gas), I had accidentally drained the battery previously, so the push button wouldn't work. So I (get this!) read the owner's manual, and it says to manually activate the choke (push it over with your finger), THEN pull the cord when using gas. So I did that. And it started on the first pull, and I didn't even pull it very hard. (The more you know...rainbow.)

I have this generator and one thing I didn't know about when I bought it is the harmonics. In order to run electronics it is recommended that your generator have a Total Harmonic Distortion (THD) of 5% or less. The generator in this video, the wgen 9500, has a THD of <= to 23%. If you want a generator that can run your house and has good enough harmonics for electronics go for the next size up, the wgen 12000. It costs almost twice as much as this one and, when I bought my generator, I thought the only thing I was getting for that extra $1000 was more wattage but it also has cleaner power.

Lol thats not safe , better replace it with INLET 50 amp reliance only $70 and should work. Thats is suicide outlet it will work but not in code.

Got one. I run mine on Propane. It runs the entire house including the central A/C. I have it in a shed connected to the main breaker box with an interlock to ensure no chance of having public power and Generator power at the same time.

We bought ours in 2021. Power went out today (it’s still out), it initially ran the AC and the house. But then it tripped, and now when we try to turn on the AC with everything else off, it still won’t start the AC; it trips every time. I’m incredibly disappointed. No idea why it can’t power on the AC when it initially did. What a waste of money. 😡

What's your distance from the wall to the bolts for the bathroom with the 310? I just ordered a 310 also, I only have 9" from the wall to the bolts... 😬 Pls let me know

Just bought one for a replacement for my 8750 watt. Love it. Smooth running and steady power on the meter. The remote is great. During the Florida hurricanes I power my entire house with my old one, for a few hours at a time. It will be nice not having to go out in the hurricane to shut it down and restart it. Wired into my 200a panel box, so other than the initial main breaker shutdown, I won't have to go out in the wind, rain and flying debris.

ZX300 is trash, I have a big intex pool and it wont vacuum the whole pool, the hose is big enough tho

How did the compressor come on with only a 50a outlet and no soft start!? Does your heat pump have a low LRA?

Good job but why add music so loud but voice so low? Turn the music down dude.

My husband claimed that I over planed when were put our intex 24x12x52 pool in. making sure it was wrinkle free and level and pavers were laid out and boardered correctly.... because realizing you missed something when you have 80,000 pounds of water sitting on that problem you need to correct is infuriating.

Just converted to salt.. we have the exact same set up we went with the larger skimmer.. I have a question.. how long did you run your salt system the first time?

Male to male? Why? No reason whatsoever for suicide cord

Thank you for sharing this video. My stupid electrician told me I can't use the generator because it's on a 30 amp breaker on my circuit breaker and my ac unit is 40 amp. Accidentally I forgot to shut off my AC breaker when I ran this generator and it worked. I thought it was a fluke but thank you for proving my electrician they don't know what they're talking about

I see you have natural gas why didn't you go with the tri fuel generator I have the same generator that is tri fueled and it runs my whole house

My push bottom and remote stop working I don't know how to fix it

What are you to do about the noise of the generator alerting the neighbors that you have a generator?

Never synthetic until its broke in..... never ever..

Damm 79?😂 im cooking at 105° in my garage

How many tubes of lap sealant did you use? I have a roof in similar condition, so I am trying to gauge how much I will need.

Pavers should be level. I went inside my pool before filling it and used my feet to pull the wrinkles and then again as it was filling. No wrinkes now. While the pool fills, every 39 min you should adjust the legs which is why pavers shouldn’t go too close to the pools liner as they will pull out. Wider pavers are better but we had a 16ft concrete slab poured to avoid unleveled ground and pavers potentially touching the liner. Installing a wall skimmer tomorrow!

BIG COUNTRY, First, thank you for the video. I purchased a Westinghouse WGen9500C but it shuts off the breaker when I turn on a 4 Ton A/C. Would the extra ton do this? Do you think a soft start kit would resolve the problem. Florida Hurricanes are coming soon and would like to have A/C. The generator runs independent of the A/C for two refrigerators, microwave, TV outlet with no problem. Thanks. Debra

What is being applied at 2:43? Anyone know?

Thanks for giving your opinion of the caulk gun from Lowe’s. I can’t even tell how it would work.

Great video, that was a great idea using the extension for your impact, how long was it? I will change mine in few days. Thanks for the video

Thanks for the video

Have you ever taken your pool down? We can't get our top rail disconnected, any suggestions? Anyone?

No way you left all those wrinkles at the bottom of the pool 😫

What is the brand for you generator inlet box?. I like how big it is with a wide cower (protecting from the rain while plugged in)

Like your video! And your dog!

I believe your vacuum problem is you have to turn off the flow to output valves to run the vacuum. I have seen it on another video! I hope that helps! I can't remember his video! I was watching because this is probably the last year with our pool!

It works fine. I run it every 3-4 months for about 20 minutes and use a gas extender and a batter trickle charger. Starts right up.

Starting to look into cnc basically for making stencils and the cnc machines seem endless and wondering if this X Carve would be a good choice.

Why did it take so long to start ?

We used 4x12 inch pavers under every leg and dug them down to be level. We put sand under & because we did it the right way ours has made it through 2 70+ mph wind storms here in Ky. It took a week but that was 4 summers ago. It’s definitely worth doing it the right way

We recently purhased the 10500 model with 13000 peak amps for my brother in law in Houston. He's had a real problem with power outages and the tri fuel generator is just what he needed in that hot, humid city. It powers the whole house with no problem but he shuts off his electric water heater and electric stove while using it becuase they draw too much power. It runs the A/C and everything else with no trouble at all.

How do you get the last connection done, we can’t get it into the top t,! Can’t pull it far enough to get the second ring pipe to pull far enough apart to connect it

130 ft/lb torque for U-Bolts seems excessive and maybe that's why 'locking' washer were destroyed - In accordance with on-line E-trailer ...9/16" bolts torque value range is 60 ft/lb - 95 ft/LB while 1/2" bolt torque value range is 45 ft/lb - 70 ft /lb.

I have two of them and they are life savers they will handle the load with ease

Facts bro!! I insulated my garage door with foam panels just to help

Hey great video. I have one too. Have you ever measured the RPMs at idle? Also can you confirm that an empty gas tank will take a full 6.6 gallons of gas? The reason I ask is because mine idles at 3750 RPM and it will just accept a little over 5 gallons. Hope to hear back.