Відео

You can stash a tube in there, provided you fold it very compact. Alternatively, a small pouch can fit in the internal storage. I guess you could stash a multitool in the pouch. Bit the external storage underneath the toptube would be more useful for essentials. Just make sure you buy straps if you intend on using them👍🏿

I'm pretty sure the E55 would take the win in terms of power and speed. Conversely, the Samn would take the win in terms of capability offroad👍🏿

Когда я получил набор фреймов, скорость была ограничена до 45 км/ч. С помощью Best Tool я мог увеличить скорость до 60 км/ч. Однако я решил ограничить ее до 25 км/ч (наряду с изменением других параметров). я еще не проводил тест на максимальную скорость. Но я поделюсь своими выводами и буду держать вас в курсе👍🏿

@@neekodevinchi Окей спасибо. А почему 25 скорость поставил?

Согласованный. Я мог бы начать использовать инструменты One Up EDC, которые хранятся в рулевой вилке для этого велосипеда и будущих сборок👍🏿

Lol. It's the UK. When it rains, it poors😅👍🏿

Coming soon👍🏿

Possibly. Truth be told, I've not tried another high pivot ebike or mtb. So I'd rather not generalise and say that all high pivot bikes ride the same. But I can (and have) noticed a difference compared to horst link 4bar suspension platforms which I'm more familiar with👍🏿

@@neekodevinchi so better than 4-bar linkage likely?

I would say so. Considering that I'm using a Rockshox Select+ and I haven't needed to mess around with it extensively (otherthan change between 30-35% sag when changing between 27.5-29er rear end) and factoring in the rear shocks which I've specifically hunted down to pair nicely with the 4bar emtbs I've built. But I wouldn't mind trying a coil shock, just to verify that👍🏿

@@neekodevinchi different subject: what inboard display is Bafang using with their M560?

It's called the DPC030 DIsplay. I've 3 other ebikes which will use this toptube DIsplay. So I'll do my best to feature them in upcoming content👍🏿

Perhaps the term 'versatile' is used too often, in an effort to convey the capabilities of said ebike. But please understand Prophet. Versatility is relative, depending on circumstance. Whilst I do recognise that other framesets can equally support Bafang motors. Very few have adjustable geometry. And can be purposefully adapted to suit the preferences of each rider. Me being a tall rider, I do prefer 29er rear wheels. And the chainstay length of 455 suits that. However with a 27.5 rear wheel, it can be reduced to 437mm for more nimble handling. BB height, headtube angle, seat tube angle, reach etc can equally be amended by way of the flip chip. And we can't forget that the frameset is CAT5 ASTM (Essentially downhill rated). So it's not going to break easily. So yeah. This frameset is versatile in my book👍🏿

Cheers Boyd. Much appreciated. Keep up your vids as well👍🏿

Mine's weighing 25.3kg. From what I've seen from other builds, 25kg-26kg is the average weight of the Hybridizer Sann fully built. Naturally, components, motor and battery size will change the weight👍🏿

Apologies for that. I'll bear that in mind for future uploads👍🏿

@@neekodevinchi Thank you very much! I just stumbled over your video and enjoyed your calm and informative style.

Hi there, Yes. I too am 190cm (6foot 3inches). And the xl framesize fits me perfectly (even with a 40mm stem). I use a 200mm dropper, slammed fully into the seat tube. Personally, I prefer to use 29er wheels F&R. But mullet setup can be done as well👍🏿

@@neekodevinchi thank you! Perfect!

Искренние извинения за задержку (рабочие обязательства). Я не обнаружил проблем при использовании M560 с аккумулятором емкостью 860 Втч. Я разрядил аккумулятор до 10% (44v). Примерно в этот момент я чувствую провал напряжения. Подозреваю, что в прошивке М560 установлено минимальное напряжение отсечки 42v👍🏿

I suspect you'll prefer a medium E55. If you were 5' 11", I would reccomend the large👍🏿

Hi there, Yes. You can use 27.5 wheels in the E55. However, you may find that the bottom bracket height is a little low. But some riders (myself included), prefer lower bottom bracket heights. As for the 230x57.5 shock, it will fit. But the amount of rear wheel travel will be less. However, Fox x2' do use travel reducers. So it might be possible to extend the stroke internally to 60mm👍🏿

@@neekodevinchi Thanks!

Good point👍🏿

Sincere apologies for the delay. I'm pretty sure that the chainring size can't exceed 40t. But the cassette range/ratio isn't an issue. I'm still using the stock 34t chainring with a 11/50t cassette. I've had no issues in either MX or 29er setup. The only thing is that the chain link count needs to increase when you swap between the 27.5 rear drop-out to 29er drop-out👍🏿

Hi there, Yes. The Besst Tool can change the speed limit for any Bafang CANBus motor👍🏿

I haven't had issues with the the battery cutting out throughout the M560 achieving peak output on a sustained 5min climb. I don't have details on the discharge rate of the battery. But the bike so far has been virtually problem free👍🏿

Indeed!!🤔👍🏿

I see your point. I'm 6foot 3inches. I'm using a reach adjust headset to maximise the reach on the large. But I'll share my thoughts in terms of fit and feel in the full video👍🏿

At 208cm, I'm particularly interested to hear your thoughts about sizing, geometry, weight & handling, of the Frey Dopamine & any other high pivot ebike frames that tend to run large.

After many years riding a 29er, I'm ready for the shorter chainstay lengths (& handling advantages that come with that) possible with a mullet layout...

We can arrange something Christopher. I do need to head down to Cannock Chase to shoot some ride footage. So pm me and we'll go from there👍🏿

@@neekodevinchi BTW: Only my mortal enemies call me by my surname. My friends call me JC.

I don't disagree, that a suitable carbon frame could be had for less than this frame costs... I wouldn't buy based on vehicle warranty, though; most have enough caveats that they're not worth the paper they're printed on. That said, the most well-equipped ebike in our own little fleet of vehicles, is a white-label-ish Chinese assembled model, that did indeed come with a warranty & well known components, for not much more than this frame costs.

I've seen worse weld joints on mainstream alloy emtbs. The headtube, toptube and seatstay have a hydroformed finish. However, you have raised an interesting point about the price comparison between hybridizer and Dengfu👍🏿

Currently, 25.5kg. but i might be able to shave some weight off with selective components👍🏿

...you never know🤫