Відео

You're welcome :)

I haven't done this before, but it's possible it might work if you set the guest user to the unix user that owns the directory, and setting the share to public. I'm looking at this Server Fault answer for reference: serverfault.com/a/828067

You're welcome! I'm glad my video was able to help :D

You're welcome :D

You're welcome! :D I'm glad I could help

i have same card like you, did u flash the bios .

I would definitely try to flash the Vbios to a stock one, I wouldn't be surprised if the previous owner ramped the fans conservatively.

I actually made a video about this! ua-cam.com/video/1X-ezdpi1Ow/v-deo.html Give it a look and let me know if it helps :) Though ultimately the exact process will depend on your motherboard, since brands like to do it their own way.

It's very possible 😂

What version of amdvbflash did you use?

@@BitGoblin I use the version like in your video

Having same issue on my rx5700xt

Hmm, was it working before? Or is this for a new install?

@@BitGoblin i dont remember what my issue was haha but i got it fixed. I think it was something with my raid configuration. Thanks for responding though.

You're welcome! :D I'm glad I was able to help

Hmm, what version of amdvbflash did you use?

@@BitGoblin latest 3.0 version on windows, and lastest version available for linux systems. on both systems appears as an invalid amd gpu

Swamp man is life

I'm glad my video helped! :D I hope that card treats you well

You're welcome! :D

I would try googling for like "sapphire rx 7600 XT VBIOS" and see if anything comes up. Sometimes they have some unverified images that they don't list in their database. Do you mean my old tutorial? It's okay, but the GUI has been deprecated and there isn't a new version that supports the 7000 series cards, so I think you're stuck with the CLI

It's possible a flash could fix it. To do so without a display though, you would need to either use your processor's integrated graphics to drive a display or use a second GPU to do it. I haven't tested it, but you might be able to connect to your system via RDP if it's already enabled

Hmm that is really odd... I'm assuming you've tried like a different PCIe slot if you have one? Or maybe in a different PC?

Yep! I somehow missed that when I made this video, but I actually explained it better in my newer video on the amdvbflash CLI :)

Thanks for the feedback! I think this was actually one of the videos I messed up and forgot to add my usual EQ, compressor and other effects to, so it was a bit quieter than usual. But I'll definitely make sure to keep the volume up a bit!

Hmm, that's unfortunate. I hope none of the services are blocking it somehow... If it does get resolved I'd be curious to know what the fix was!

@@BitGoblin ive been dealing with this issue over a year now, but nothing is blocking it, tried seperate isps in my home, from cable to dsl, but no success so far, its sad because I host lan at my place for arround 15 people and I like tinkering

Man that's really weird... It's not like an issue with Docker routing or anything? It really sucks to not be able to utilize this and you're like the perfect candidate to benefit from it!

@@BitGoblin as of my knowledge no its a docker routing issue, I could be wrong obviously...but what else could I change in docker routing or similar

Yuck! Sounds like you need new memory 😬

@@BitGoblin ya its the xmp ..ever since i replace my cpu it started the bs.im doin an rma.

I wonder if the new CPU just doesn't handle faster memory as well as the old one? But unless you downgraded that seems rather odd... Definitely worth an RMA

@BitGoblin that's the problem I replace my 14900k with a new 1 and the new 1 has an sp score of 101 compared to my old 1 which had 93. Don't think it's the cpu

@coryo617 oh yeah, I was thinking like if you downgraded from like an i7 to an i3 kind of deal, where the memory controller on the CPU might not handle higher speeds as well. But it would be weird for the RAM to all of a sudden not handle it. Maybe the new CPU is ever so slightly worse? Idk, just trying to think of what might be the issue

For me it's the first download here, version 5.0.567: www.techpowerup.com/download/ati-atiflash/

@@BitGoblin it does no let me go for the flash, IFWI's SSID is not same

What card are you trying to flash?

@@BitGoblin an rx 5700 xt nitro+

@@lefi8435 Did you resolve this issue, getting same on 5500XT

If you haven't already it might be worth disassembling the cooler and see if there's a connector unplugged or something. I wouldn't be surprised if it was used for mining that it was physically disconnected somehow to save some power

@@BitGoblin My card was preivously used, but not for mining. When I first recieved the card, everything worked perfecty, including the rgb until one random day it stopped working. This is the second time this has happened to me actually. The first time I simply shutted down my pc and drained the power out of it. It came right back on. The second time, nothing. Lots of looking up online later, I found out that I got hit by the mysterious gigabyte rgb problem with no solution. Basically I just have to wait till the rgb randomly comes back on 😭😭😭😭

Wow that's pretty terrible! I can't believe they wouldn't have some sort of fix for it, though I guess if it's just RGB maybe it was low priority?

What version of the tool did you use, and what graphics card are you flashing? It's possible you might need a different version to flash your card

Welp need an ATI discrete card to flash my card. I give up.

Awesome! I'm glad you were able to get your card in working order again :D

Awesome! I'm glad you got it back to a working config! :D

Hmm same issue with 5500XT, mismatch ID, I will give this a go

In a lot of cases RAM may only be bad in certain sectors/components and can function normally until you hit those bad bits (e.g. it loads Windows fine but loading a large game may hit the bad sector). Or it can be slightly degraded to where it's fine til it's under load where it fails.

@@BitGoblin ahh. New build and I used old ram I had laying around. Stuttering crazy. Used a used m2 drive too. But I’ll give this a try and see how the ram performs! Good video man!

@robloyst4514 good luck with your troubleshooting! Fingers crossed it's good :) and thanks!

I'm not entirely sure what you're asking? But they serve two different purposes, where a modem essentially just connects you to your ISP and powerline is just a way to connect your system to your local network (roughly equivalent to running a long ethernet cable). So they're not really interchangeable.

@@BitGoblin okay gotchu. I didn’t realize that you still needed to attach it to the modem for it to work. I’m assuming when you use Ethernet and you plug it into an outlet that goes to the modem as well.

I don’t have any Ethernet ports except one which is far away from my living room so I’m trying to find a solution to get wifi into my room to work better for my pc tower.

Oooh yeah I think I misunderstood what you were saying! So you don't have to plug it directly into your modem. Instead, you'd plug one of your adapters in an outlet near your router, and connect to one of the LAN ports on your router with an ethernet cable; and in your case plug the other adapter in an outlet near where you want your wireless access point, and connect to it with an ethernet cable (going through a PoE adapter if your AP does that). You can kind of think of it like a long ethernet cable - it's just using the power run through your house as an extension of the ethernet cable, just with more latency and in a lot of cases lower bandwidth :)

You will likely need to fully uninstall everything for the Nvidia driver (dnf remove nvidia* --allowerasing), run an update just to be safe (dnf update), then install the Nvidia 470 driver. Let me know if that helps!

@@BitGoblin I did that but I did not update it because I thought, if I update then the default Nvidia 555xx driver could be installed again through the update and the same thing would happen. So, after removing the Nvidia driver, I install the 470xx driver from RPM Fusion repository and then a weird thing happened. After rebooting, on the login screen, when I clicked on the wheel icon, which lets us choose the DE, there were only 2 options, GNOME and GNOME Classic. But before removing the default driver and installing 470xx, there were more options with these two like GNOME Wayland, GNOME Xorg etc. And when I logged in, this time it entered into GNOME Xorg DE and it became default. I know how the GNOME Xorg DE looks like because I used it before. And then the 2nd weird thing happened. In every window, be it settings or folders, nothing was visible except the outer borders of that window. But when I moved my mouse over a window, the texts and buttons became visible and sometimes they disappeared again. This is probably the 470xx driver incompatibility. This is the last experiment which I did and then I reformatted the SSD and installed Fedora from scratch and now it is running on Nvidia Nouveau driver. I should mention that Fedora always recognised the GT730 card.

Yeah I rambled a bit, I try to do better but it happens a lot lol. But the amdvbflashwin has been deprecated and removed from the latest version, you'll need to use the CLI now. I made a new video explaining how to use it 🙂

Awesome! I'm glad you have had a good experience with it 🙂

Same. Bought 2 yrs ago, scroll wheel got broken and am looking for a new mouse with the same ergonomics. Not sure if I should go for the wireless one or more advanced one though.

@@mehmettalici you should get another one , after mine breaks im getting another one from steelseries cause i love the software and i wanna try something new

What card are you trying to flash, and what do you get if you run "amdvbflash.exe -i"?

@@BitGoblin Not sure if he is doing the same as me but same issue trying to install a 6800XT Nitro+ Bios onto a 6800XT Pulse OC for the slightly higher power limit is there anyway to bypass the SSID lock?

@0Synergy I think there's a -f flag that should force the flash. That might be worth a shot

@@BitGoblin Sadly doesn't work, found a reddit post about a guy managing to get a 6900XT Liquid Cooled bios on a regular 6900XT by using the Linux version going to try that once my new SSD arrives.

@0Synergy hmm, that'd be funny if the Linux version actually allowed you to force it but the windows one didn't lol. But let me know if it works!