Відео

Yes, it’s strange it’s so quiet. Was your smoker okay? Or had the filling pipe fallen off?

@tigerpark1958 hi! 👋 I know it’s really quiet, I think because the internals are so small, it’s hard to fit a bigger speaker, and the control board is very different from the usual type in heng longs etc. I think it’s like a board out of rc diggers and stuff. If I find a way of making it louder without changing the board I’ll pop up a vid. Thanks for watching! And have a great week.

@@RCTANK07 hi! Yes, I’m trying to source one to see how much the new ones are, and where to get them! Thanks for watching and have a great week!

Thanks so much, and thanks for watching, means a lot. Have a great week!

@@russellbryan2288 thanks so much, and I’m glad there helpful 🙂 The wash’s would be the same, just a different colour, and most company’s state the wash colour for the camo colour, I think with white and pin washes you go a bit lighter. I’ll see what I can do! 🙂

@@AssassinsCreed1701 hi! It’s just a table flag from Amazon, I sealed it with pva watered down to stop it fraying, then cut it to size, tied it to the arial with fine cotton. Flag link here www.amazon.co.uk/AZ-FLAG-UKRAINE-UKRAINIAN-plastic/dp/B00T9EDKJ6/ref=mp_s_a_1_20?adgrpid=133286415493&dib=eyJ2IjoiMSJ9.OttEzzZB_biMQhg0PD4ov3X3F6IhRUGFaaQW14gkrYwz8YZvGmtX_zI0sru5ohaY6bqzWDL69wUoRdumfawtAnUuHc1IVm3Ss1rCl7e6NGQZJCt_q3pJ1C3uS3WNq8Rkwpqg5Vne9C7woi2xaawYJ95s1Y-QWjzavnBHWQPKWyIBGAI1He6X7x_dhWjqyduvnpDaoCO5vUwfTvatKbBHnQ.8FB0cA6iEviwijMisM8XPPtal0BKCemv50612m6plu0&dib_tag=se&hvadid=583153006052&hvdev=m&hvlocphy=9045837&hvnetw=g&hvqmt=b&hvrand=1757804340671228520&hvtargid=kwd-1640030334916&hydadcr=14401_1827467&keywords=ukraine+flags+small&nsdOptOutParam=true&qid=1736703225&sr=8-20 I think it was this one! Have a great week and thanks for watching!

@@dominicgautrey hi! I used brass strip, bent the shape around a rod the same diameter as the tow cable (the cable was from spare for a tiger tank) and then slotted at the top for some 1/16th butterfly bolts I had in my spares box. Sorry there’s no tutorial, it was my first tank getting back into building, and UA-cam wasn’t really on my radar so much! Thanks for watching, and sorry that’s a bit useless! Have a great week

@@geromefriesen7505 hi! It’s just a table flag from Amazon, I sealed it with pva watered down to stop it fraying, then cut it to size, tied it to the arial with fine cotton. Flag link here www.amazon.co.uk/AZ-FLAG-UKRAINE-UKRAINIAN-plastic/dp/B00T9EDKJ6/ref=mp_s_a_1_20?adgrpid=133286415493&dib=eyJ2IjoiMSJ9.OttEzzZB_biMQhg0PD4ov3X3F6IhRUGFaaQW14gkrYwz8YZvGmtX_zI0sru5ohaY6bqzWDL69wUoRdumfawtAnUuHc1IVm3Ss1rCl7e6NGQZJCt_q3pJ1C3uS3WNq8Rkwpqg5Vne9C7woi2xaawYJ95s1Y-QWjzavnBHWQPKWyIBGAI1He6X7x_dhWjqyduvnpDaoCO5vUwfTvatKbBHnQ.8FB0cA6iEviwijMisM8XPPtal0BKCemv50612m6plu0&dib_tag=se&hvadid=583153006052&hvdev=m&hvlocphy=9045837&hvnetw=g&hvqmt=b&hvrand=1757804340671228520&hvtargid=kwd-1640030334916&hydadcr=14401_1827467&keywords=ukraine+flags+small&nsdOptOutParam=true&qid=1736703225&sr=8-20 I think it was this one! Have a great week and thanks for watching!

Thanks! I’m upgrading my t90 to a t90Ms with the dclrmc kit.Driving around in The Netherlands with russian colours doesn’t feel right so I thought the ukrainians in the fog of war most probably must have captured one of the t90m’s and are putting it to good use.

@SWEpanzer hi! Yes tongde don’t really think about shipping, I think it’s the battery going rouge coming off the sticky tape in transit and it knocks the living bananas out of the insides of there tanks. She’s a great little stand alone model, just a shame it’s a bit oversized! Thanks for saying hi, and have a great week! 🙂

@mrtankalotrctankschannel that cold ve the reason yes😂 same thing with my m109a2 that i got recently. Battery was having a blast in there smashing things💥 have a great weekend🙏

@ you too!

Hi! Thanks so much, and I’m glad it was useful 🙂 Have a great week!

Um I don’t think you watched all the video, I love Haya to bits, I don’t know if you noticed but my profile picture is a high Chieftain, it got me back in the hobby, and Andrew is a very nice man who has done a hell of a lot for this hobby, with a small company in Wales. Um if you did watch the whole video, you would’ve seen that I said that this wasn’t a reflection on haya ability to make ready to run rc tanks, and I completely understand the limitations of injection moulding and that it can cost £140,000 to make the tooling for 1/16 thank. But as I’m a model maker if I can’t find something that needs improving then I’m a bit crap aren’t I?, you can find improvement in the best of model kit because that’s why we’re model makers. There are many upgrade kits for the massive 16 armour tech tanks because they also need improving in certain areas, the long tanks quite frankly if it’s second world war stuff are extremely dodgy but there are many forums on how to improve them. There is very little that I need to do on this high Centurion to make it look museum quality. Um sorry about the speech impediment. I don’t Overdub you get what you see if you don’t like it you don’t really have to watch it. I’m glad you find my videos are okay. Im looking forward to seeing your contribution to the community, Happy New Year.

I’m happy new year

Um happy new year

Hi! I’m just trying to hear back from toucan hobby to see if they have in stock the new 7.0 2.0 version with proper torsion bar suspension. If you can afford it, I would get the steel gearboxes which are hopefully in the new 7.0 2.0 version of the leopard . Soon as toucan hobby get back to Me, I’ll post a link here. Happy new year and thank you so much for watching it makes it very worthwhile for me to do this, and hopefully it’s helping somebody else . If you have a look on heng long Korea on UA-cam, he has a video of the new leopard on there .

Thanks!

Yes, it did really well, good little tank 🙂 happy new year and thanks for watching!

I was thinking about that, but the little boy driving it was very muddy 🙂 Thanks for watching, and happy new year!

@@davepriddy9263 it’s my little ones Christmas prezzie, he’s driving 🙂 and he wanted me to film it for him.

@@mrtankalotrctankschannel That is awesome to be able to share your interests with him! I am still working on my Abrams and M60A3 for painting ,detailing, and mechanical/electronic upgrades!

@@Pitatt0 hi! Nearly it’s vvss thanks for watching!

@@mrtankalotrctankschannel nice

Thanks! And I do love a bit of the gorillas too! 🙂

@@stephensmith799 hi Steve! Not sure I could convince the wife!! 😂 Hope you had a great Christmas and well played the other night!

@ Ah… let her know of that wise adage ‘Experiences last longer than things’😉. Yes the other night was much better than usual. After the gig before that, it was so awful the idea of quitting even crossed my mind. I think we should stick with the analogue desk. It would shred Paul’s nerves to go back on the Mackie!

@ After thought…. I must tell you about Tank 5 one day

@ next rehersal! 🙂

@ Perhaps it can be told. It was 1967. Most of us had seen The Great Escape. The idea had been to dig an escape tunnel to get out of school. This was a bad idea on three counts 1) it was easier just to use the school exit 2) the tunnel had been discovered and collapsed 3) it didn’t go under the boundary wall but described a large semi circle. However it had been a very heroic effort by previous school kids being about forty yards long. Around the scrub like land were scores of short planks of about a metre each. An egalitarian decision was made: each pupil was entitled to five planks. Instead of tunnelling at one end of the collapsed tunnel most of us dug a large hole and throne room beyond that. It was roofed over with planks and clods of earth. The throne room had a dirt throne fashioned as a step. Duly named Manor House, the Lord of the Manor, Titch Jones sat on his thrown and held court. This wasn’t really my thing so I started digging out an alternative den at the other end of the collapsed trench. Finding more planks I was able to go ‘over quota’ on the Finder’s Keepers rule. It was going ok at about 6 out of 10. A gang of One. Titch Jones fulfilled his aristocratic position by directing refinements to Manor House which was a very impressive structure with what would be called an ‘eco roof’ of living turf. Two or three Manor House defectors joined me and the first of these, Curas argued that it deserved a name. It was christened Tank 5. Withdrawal of Curas’ five planks from Manor House didn’t threaten its integrity but a sudden rebellion at Manor House collapsed the main chamber. With further defections to Tank 5, war was inevitable. Divided roughly equally Manor House threw clods of earth at Tank 5 and we returned fire. The clods burst on contact with the ground in a very satisfying way with added vocal sounds of ‘Pwwwch!’ and ‘Boffff!’ adding to the effect. With about 60% of the theoretical maximum membership, Curas sought directions from me. Tunnelling began in all directions radiating like spokes of a wheel. Tank 5 developed a turret out of pooled planks. I thought that things were going rather well. However after about three more sessions, much to my surprise, Curas put his head through the roof shouting loudly ‘I JUST CAN’T STAND THISSSS’. And so Manor House and Tank 5 both fell. In my line of work the animation of Manor House was ‘Hierarchical Reasoning’ which triggered its downfall much like Putin’s will be. Tank 5 thrived on Individualistic Reasoning, augmented by the Enclaved pleasure of exchanging fire with Manor House. Alas it couldn’t last. Surveying the wreckage of Tank 5, I accepted with Fatalism that there could be no undoing of what had already been undone. The Great Escape was forgotten and we graduated to making exotic space craft from sprues and randomised Airfix plastic parts. And so tensions grew between the SPAF air force and the LLAFF air force…

@@John-mq9fx it should be fine, if you want to be picky you can lift the gear boxes up a bit to raise the sprockets, but the heng long one has a better dimension turret than the taigen panther. Happy Christmas! 🎄🎄 and thanks for supporting the channel 🙂

@@whya2ndaccount hi! Thanks 🙂 and you too, hope your having a good day, thanks for supporting the channel this year 🙂

@@mrtankalotrctankschannel Mate all good. Whilst hopefully not that extreme I'm sure I've been guilty of the "That's not a tank!" type comments.

@ ah but you were making an observation or critique, Ive had a few who were just rude. One comment told me to ‘shut up’ till I knew what I was talking about, the dude looked like he’d just been sacked from tenacious D so I guess he’d got got more time on his hands!. I told him he was a very rude man! 😂 Hope you’re keeping very well!

@@RH-ix9nf no, but your on the right track! 😉 have a great day!

@@mrtankalotrctankschannel I hope you'll show us in a video! I bought a leopard 2a6 earlier in the year and have been following your videos to make it look good. Thanks for posting them.

@ hope it’s helpful, and thanks for supporting the little community, means a lot to me, and yes my little man now has his prezzies, might put a post up on a little bit of painting I did on it, and the sprockets are 1 to 2 mm too far back, it’s bugging me……😳

@@rosswhyte4616 you too! 🙂

@@williamberkley9581 you too! 🙂

@@savoy9611 thanks so much, you have a great time too, and thanks for watching it 🙂🎄🎄

@@Lee-fe1uk hi! Yes, Haya tanks in wales www.hayaltd.co.uk/RC_Tanks/cat191101_254906.aspx or forgebear tanks www.forgebeartanks.com/store/c1/Featured_Products.html Have a great day!

@@williambaker5670 you too! Have a great day 🙂

@@saamenorth6867 and to you 🙂🎄🎄

@@SCSIII thanks! Have a great day!

Hi! Yes, there from a company called Attracks, there’s a review I did on them in the t-72 playlist. There blackened with mig track black. Thanks so much for supporting the channel, and happy Christmas 🎄

@@mrtankalotrctankschannel Merry christmas and happy new years to you too. I hope people realize how invaluable you are to the rc tank community. We dont have a community like other rc platforms.

@ thanks so much 🙂 I’m still amazed people even watch it 😂 hope you had a good Christmas 🙂

@@mrtankalotrctankschannelPeople do and definitely need to watch and keep watching you. likewise my friend and happy new years.

Hi! You need a 5.3 system, will still fit your wiring, the later 6.0 onwards changed the connection and got rid of the 8 pin turret connection. www.ebay.co.uk/itm/225038014856?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Cs3lVTYFQuK&sssrc=4429486&ssuid=uZug9H3JSrC&var=&widget_ver=artemis&media=COPY You can upgrade to 7.0, but it would cost more than buying a new one. Good luck with it and let me know how you get on! Happy Christmas 🎄 and thanks for watching 🙂

All sparmax, but I’ve found a cool battery powered kit. There like £45 and it’s quite good! Just get a few spare batteries. If you want more advanced I’d go for anything sparmax compressor wise, and I haven’t got one, but a mig 0.3mm airbrush double action. Happy Christmas to you too! And thanks for supporting the channel, very good of you! 🙂

@mrtankalotrctankschannel thanks for sharing this information, and I really appreciate it!

@ really appreciated you supporting the channel! Makes it worthwhile 🙂

Hi! It’s all good, and as long as you have bearings in the shafts and don’t sit in water it’s remarkably dry! (And you glaze out the drivers hatch. Happy Christmas 🎄 and thanks for watching 🙂

@@CertsUAsPilot hi! That’s a great way of doing it, and you can get rid of all the bb motors etc. I’m a sad git that likes the bb unit still, so if you want to keep the bb function you can do it like below RC Tank Heng Long 7.0 Abrams M1A2 Air soft servo recoil conversion. #howto #modified ua-cam.com/video/8pXJwo_DJNs/v-deo.html Thanks so much for watching! And have a great week!

Hi! No, just make sure you test it first if your using Humbrol, or by AK or get a cheap air brush and use VMS Happy Christmas 🎄 and thanks for watching 🙂

@@mrtankalotrctankschannel I have a 400 ml can of Army Painter Matt Varnish. Do you foresee any problems using that? I also have a small can of Tamiya Matt Clear. Any advice is greatly appreciated.

@ hi! I think you can still use filters on Matt, I’ve always stuck to semigloss as the filter sticks to the paint, but doesn’t capillary action over the rougher surfaces of Matt varnish, but I think I saw a mig tutorial using Matt, and night shift uses Matt before his pin washes. If anything it will just be harder to remove. Have a great week! And sorry for tardy reply

@@davidhorvath1639 hi! It’s just a piece of 10mm oak doweling cut to length and stained with mig dark brown was. Hope that helps, and it’s nuts, but the anti ditching log on Russian tanks is machined! 😂 Have a great week

Hi! thanks for watching them, without the support of the community it would all be a bit pointless! And they should be in order in the play lists, its tricky with titles to not run out of words, its the thing i need to work on is the title descriptions. Thanks again for watching, it always blows me away that people actually like watching it!! Have a great weekend

yes, i really love the Chieftain, its so iconic of its period, and it sounds just awsome,

thanks so much, and its awesome to me you actually like it! have a great weekend

Hi! I think you have the new version with torsion bars so the screws are on the top hole underneath some of the anti-slip squares and inside where the on switches and underneath one of the round engine hatches. That’s cool where did you get it?

@mrtankalotrctankschannel ok I saw that it had the torsion bars when I was putting the battery in and saw into the hull. I got it off ebay actually lol. And I did get to the driveshaft bearing and there actually already was a bearing set there.

why thank you! 🙂 but i guess i really should have been working on the leopard?? 😂

no thank you for watching!! have a great weekend

Hi! Yes, as you know the m completely useless with electronics. It drives me nuts Clark doesn’t change his boards to the new style heng long wiring, the whole 8pin hull turret connector is so flipping dated. Elmod do an adaptor to make it plug and play, I wonder if it would work on the Clark board? I’ve got to get another Clark board and see, also to program it you need a fricking Sony tv remote! Why can’t he do a program on the computer to change setting. Good luck! If you get it all working let me know 🙂