ATTRACKS 3D PRINTED END BOLT FITTING for Heng Long T-72 & Hooben T-55 Tanks, & WEATHERING
Вставка
- Опубліковано 29 лип 2024
- #toys #coolgadgets #modified #rctank #howto #henglong #henglongtanks #tank #trending #scalemodel 😉
Hi all just a vid on the track finishing, and the next vid is of this complete, thought i'd bore you all first though!.
Also iv'e made a track pin up with a bolt detail attached, so you can break the tracks still.
Once you have stuck the 3D end bolts in, you cant push the track pins out anymore, but you can if you do this.
The Bits
Mr Mengs Nuts (there's sets of these, id get he lot!)
www.emodels.co.uk/meng-model-...
glue
www.snmstuff.co.uk/product/vm...
Track wash
www.snmstuff.co.uk/product/mi...
mud
www.migjimenez.com/en/ammo-pa...
00:00 introduction
00:50 fitting bolts
01:45 building the removable track pin bolt detail
04:23 track breaking test for the removable pin
05:56 applying track wash
08:09 moist ground......
09:47 finished results
10:26 replacing and re pinning the tracks - Навчання та стиль