Відео

Do you recommend these?

So how do you know how many times to go back and forth?

Awesome video! I have a Jackery solar battery backup system i have been wanting to protect but most of the information about faraday cages is pure garbage, this is great!

Hi, where do you buy the aluminum window screening mesh? The ones I'm finding on Amazon are for insects and such.

I cannot. Cannot get a freakin burr on these things. About to sell them. Using your 35 degree jig (factory bevel is closer to 40) but I absolutely can’t get a burr to form.

Ron. Any advice on sharpening the tip of these heads? Maybe a dowel?

Very interesting and helpful! Thank you.

can you please stop circling around and around!

Do you have a set of instructions relating to the construction of your generator faraday cage? (A detailed step by step construction setup and list of materials used)

Question. EMP is not radio waves. A single powerline can stop an AM signal. Did you test Bluetooth or GPS signals under this cage. I made a small bag for my key fob and I tested how much aluminum it took to stop the signal. 1 wrap of aluminum did nothing. 2 wraps of aluminum blocked some cellular. It took 3 wraps to stop Bluetooth and GPS signals. I only mention this because it looks "too simple" to prevent high powered magnetic waves from reaching the inside. Similarly to a microwave oven some waves still come out through the screened glass window.

Dont forget to faraday protect those solar panels for your Jackery.

Will it sharpen magnus stingers also

im getting dizzy following him running around the generator !!

Perfect video and explanation! You just saved me from purchasing one of those expensive faraday generator bags! AND I'll be able to store items on top too.😎 Thank you so much for sharing!!! Next, the house.......😂

What about the tanto portion of the tip? Doesn’t this get neglected due to the secondary bevel?

Did you grind off the notch where the o-ring sits?

Will this 32 work for the iron will wide single bevel

Anyone know where these heads are manufactured I refuse to support China

I've recently bought these heads and this sharpener... But i added heaps more tape, to the point where I could not add any more. And even then I had to move the blade very far to the down slope to the point where I was taking material off the guide itself. At the end of the day, it sharpened, but I dont understand how we ended up with vastly different setups

Love the videos! Would love to see one done for the day six evo x broadheads.

Man idk what I'm doing wrong but cannot get these blades sharp

Just curious if you ever tried to strop that edge on flat paper instead of your device after creating the edge with the 344 guide.. Seems to me this would strop a very slight micro bevel on to the outer most edge creating a super polish right on the very cutting edge itself. Just wondered if you ever tried that and if there was any sharpness difference.

This is so good

Thankyou, watched an Australian broadhead sharpening video and when the bloke sharpens he doesn't remove the burr, the reason he says is when hunting animals with thick hide or pigs with coarse hair as the broadhead penetrates the hide the skin takes the burr off leaving a razor sharp broadhead which then hits the vitals

Awesome tutorial....what type of sharpness is achieved on the scale with this? 233 down to whereabouts? Thank you!

Just ordered and tried on vpa and blade does not stick out far enough to even touch the diamond plate. Tried on a couple different brands and same thing.

Add ferrite cores to the wiring of the generator

I love the Ser razor black hornets, flies like a field point and is devastating on game. I tried the string method for the serrations without any success. Found some tiny, diamond grit rat tail files on Amazon, way faster and way easier to sharpen the serrations.

Criminal this video doesn’t have more likes. Great tips, thank you. 🙏

Brilliant. Especially the staples. Though you probably dont need the strap metal. Just put the other clamp further away and make that left hook longer.

Nice!

What buffing wheel works good on the bench grinder? Also whatever i do i just cant manage to get the mirror finish on the bevel. I walk through all the grits and buffing compound. I can get a mirror finsh and razor edge on my vpa heads just fine but it just cant see to get it on the ironwills

How would you sharpen the trocar tip?

Will the grey stay sharp work for rage blades?

How can I buy a shapner?

chicken coop poop scoop boot scoot and boogie

Have you tested the effectiveness of the generator cage yet?

Where do you get your 2500grit diamond

Where you get the 2500grit diamond

Will this work the same of Masaai or Crimson Talon Cleaver broadhead?

When are we going to get some new sharpening videos?

Nice lawn mowers.

how many gallons sap per hour you can evaporate?

What is your plan to attach power? Do you have a way to do that without risking EMP issues?

Are your CAD files available?

Hey is there a way to contact you about this build I'd like to see if I could possibly have you build me one

EMP has happened and it is time to drag the generator out of the garage and start it up. Can I start and use the generator inside of the EMP Faraday cage? Will the electrical cord void the Faraday cage. Will I have to buy a EMP shield device to protect the generator? Can I run and receive power from the generator with the EMP shield?

Those guns are so loud. Can we insulate as well? 96 dbi

Thank you you have convinced me to not buy a serrated broadhead

That is pretty cool… radio trick