Anatomy of my barrel evaporator

This is NOT THE ONLY WAY to build a 55 gallon drum evaporator but its how I did it and the exterior seems to run pretty cool.
Link to the first test boil.
• Test boil of new Sap e...
flue collar so you can run the stove pipe out the back wall of the drum rather than the top (this allows you to use a lager pan) www.amazon.com...
1" thick ceramic wool insulation. www.homedepot....
1/2" thick ceramic wool insulation. www.amazon.com...
Barrel stove kit. www.usstove.co...
12 x 12 patio pavers (you need 4) www.menards.co...
Concrete blocks (you need 2) www.menards.co...
Fire bricks (you need 36) www.landmsuppl...
Masonry cutting disc (I went through 3 of them) you need a 4 1/2" angle grinder. www.menards.co...
Fire brick adhesive (also bonds ceramic wool blanket to the barrel) www.dap.com/pr...
16 x 30 sap pan (shown in the test boil video linked above) www.homedepot....
Bathroom fan blower to feed air into the fire. www.homedepot....

[@mriguy3202]

This is a very god build and a very good description. You did a lot of things right, thanks for sharing.

[@oogru52]

Super helpful thanks! I made some of these modifications myself this year thanks to your design!

[@Blou55]

an excellent video, very helpful. I do not have electrical service where I am going to use my evaporator, so no possibility of a blower. Do you think I will be able to function well without the blower. THANKS

[@EvilKaNegro]

Wow thanks for the detailed video

[@geoffoutdoors]

👍🍁 great setup.

[@evanloomis2602]

Thank you for sharing! Looking at making upgrades to my barrel system. My evaporator runs at about 3-5 gallons an hour and it’s only lined with firebrick. What would you say your evaporation rate is with this system?

[@andrewembry673]

Isn't the 6" exhaust flange curved to fit the top of the barrel. How did you mount it flush with the flat back of the barrel? Or did the back just curve a little as you tightened the bolts?

[@mcdls5]

Are your CAD files available?

[@francisboisvert3973]

Question how your whole stick too de barrel?

[@samandkristenbarrera4750]

Do you have a list of materials? How much sand did you buy and what size pavers?

[@innovativeoutdoorsman5067]

look in the video description

[@outdoors-fun]

Is that a 2inch pipe you use under the fire grate?

[@innovativeoutdoorsman5067]

1 1/4"

[@outdoors-fun]

Would this design work for the barrels that use the two removeable pans with the stove pipe coming off the top?

[@innovativeoutdoorsman5067]

yes

[@outdoors-fun]

@@innovativeoutdoorsman5067 How much space did you leave between the pan and the rear flat area?

[@innovativeoutdoorsman5067]

@@outdoors-fun 3 inches

[@glibed]

hi, why the sand on top of the fire bricks ?

[@innovativeoutdoorsman5067]

ITs a low cost way to change the height to set the best spacing for the flames that travel under the pan as the flames work their way towards the stove pipe outlet.

[@glibed]

@@innovativeoutdoorsman5067 thanks for sharing i like everything you did and will emulate. my family will think I am a genius

[@tylergreenwood1097]

What is your fan?

[@innovativeoutdoorsman5067]

this test was done with an inline fan I had laying around but I also have a braun bathroom vent fan I will try.

[@fishhuntadventure]

@@innovativeoutdoorsman5067
curious… would not having a vertical and taller smoke pipe induce better draft and thereby let it burn hotter without forcing cold air into the arch? My various friends and family that sugar with woodfired arches get glowing red firebox doors with natural draft… blowing air in might fire the wood off faster but since to goal is putting heat to the pans (not burning wood) and the gasses from the wood are what burns the hottest I’m not convinced the fan is beneficial.