- 163
- 590 249
Thyial Industries
United States
Приєднався 21 жов 2016
Starting My Small Business with ZERO Experience – Here's What I Did
As a complete beginner, I took the leap and started my small business from scratch. In this video, I walk through the steps I followed, the challenges I faced, and the lessons I learned along the way. Whether you're thinking about starting your own business or just curious about the process, this video gives a real look at what it takes to get things off the ground!
Follow Me on Social Media:
• Instagram: @iamthyial
• Facebook: profile.php?id=100083348571079
Visit My Website: Check out my personal website for more information and updates: www.thyialindustries.com/
Support the Channel: If you enjoyed this video, please consider liking, commenting, and subscribing. Don't forget to hit the bell icon to stay updated on my latest uploads!
Tags: small business, beginner entrepreneur, how to start a small business, small business tips, starting a business from scratch, business startup, entrepreneur journey, first-time business owner, beginner business advice, small business beginner, how to start a business, new entrepreneur, small business ideas, business startup tips, launching a business, starting a business, entrepreneur advice, starting a business as a beginner, business for beginners, how to start
Follow Me on Social Media:
• Instagram: @iamthyial
• Facebook: profile.php?id=100083348571079
Visit My Website: Check out my personal website for more information and updates: www.thyialindustries.com/
Support the Channel: If you enjoyed this video, please consider liking, commenting, and subscribing. Don't forget to hit the bell icon to stay updated on my latest uploads!
Tags: small business, beginner entrepreneur, how to start a small business, small business tips, starting a business from scratch, business startup, entrepreneur journey, first-time business owner, beginner business advice, small business beginner, how to start a business, new entrepreneur, small business ideas, business startup tips, launching a business, starting a business, entrepreneur advice, starting a business as a beginner, business for beginners, how to start
Переглядів: 194
Відео
I spent 6 months creating a CNC Plasma business...These are the expenses.
Переглядів 3,1 тис.21 день тому
Title: How Much It Actually Cost Me to Start a CNC Plasma Business Description: In this video, I break down the real costs of building my own CNC plasma cutting table, sharing the pros and cons of a DIY build versus buying a new table outright. I go over every detail, from materials to labor, so you get an honest look at the expenses involved. If you're thinking of building your own, this will ...
Unmatched Precision, Unbeatable PRICE | Budget CNC Floating Z-axis |Plasma Business Pt. 8
Переглядів 3,2 тис.Місяць тому
Title: Budget CNC Z-Axis Add-On: Is Cheaper Really Better? | CNC Plasma Business From Scratch Pt. 8 Link to the SheetCam post forum: forum.sheetcam.com/t/sheet-cam-grbl-torch-probe-post-processor/7331 Description: In this video, I’m upgrading my DIY CNC plasma cutter with a new Z-axis from JD's Garage. While it took a bit more time than expected to get everything dialed in, I eventually made it...
DIY CNC Plasma or Small Business Mistake? | CNC Plasma Business Pt. 7
Переглядів 4,4 тис.Місяць тому
Description: Business Inquiries: For business inquiries, please contact: [iamthyial@gmail.com] Items Used in This Video (Amazon associates links. I earn a commission if you choose to purchase these products at no extra cost to you): Drag Chain: amzn.to/3zVI7gk Air Dryer: amzn.to/3WpnYYS 1: DIN Rail kit - amzn.to/43NKFYT 2: computer monitor plug - amzn.to/3vqJ6DF 3: On/off switch - amzn.to/3xal9...
Starting A CNC Plasma Business Doesn’t Have To Be Hard. | Pt. 6
Переглядів 4,2 тис.2 місяці тому
Products used in the video/Amazon associates links(I earn commission if you choose to purchase these products at no extra cost to you) Drag Chain: amzn.to/3zVI7gk Air Dryer: amzn.to/3WpnYYS 1: DIN Rail kit - amzn.to/43NKFYT 2: computer monitor plug - amzn.to/3vqJ6DF 3: On/off switch - amzn.to/3xal9Rh 4: 4 pin panel mount connector - amzn.to/3vr2S1Q 4.5: 2 pin panel mount connector amzn.to/3J3Eq...
Turning JD’s Garage CNC Plasma Cutter into a Money Making Machine. | Pt 5
Переглядів 8 тис.3 місяці тому
Get the 6061 Bearing Blocks here: www.thyialindustries.com/shop-1/p/6061-aluminum-bearing-block Products used in the video/Amazon associates links(I earn commission if you choose to purchase these products at no extra cost to you) Number 16 is the Arduino panel mount connector 1: DIN Rail kit - amzn.to/43NKFYT 2: computer monitor plug - amzn.to/3vqJ6DF 3: On/off switch - amzn.to/3xal9Rh 4: 4 pi...
Super Simple DIY Chicken Feeder | 32-Gallon Feeder Holds 1 Month of Food!
Переглядів 2,3 тис.4 місяці тому
(I earn commission if you choose to purchase these products at no extra cost to you) Get the Feeder Heads Here: amzn.to/4azvDrw Learn how to create a simple, low-budget automatic chicken feeder using a 32-gallon garbage can! This DIY project holds up to a month's worth of food, making chicken care easier and more efficient. Perfect for backyard poultry enthusiasts looking to save time and money...
Budget DIY CNC Plasma Cutter for Small Business | Pt. 4
Переглядів 10 тис.4 місяці тому
Get the 6061 Bearing Blocks here: www.thyialindustries.com/shop-1/p/6061-aluminum-bearing-block Products used in the video/Amazon associates links(I earn commission if you choose to purchase these products at no extra cost to you) Number 16 is the Arduino panel mount connector 1: DIN Rail kit - amzn.to/43NKFYT 2: computer monitor plug - amzn.to/3vqJ6DF 3: On/off switch - amzn.to/3xal9Rh 4: 4 pi...
I want a CNC Plasma Business. SO I MADE ONE | Motors, Belts, Electrical | Pt. 2
Переглядів 13 тис.6 місяців тому
Thanks, to JD's Garage for inspiring me to make this DIY CNC Plasma Cutter. Products used in the video/Amazon associates links(I earn commission if you choose to purchase these products at no extra cost to you) 1: DIN Rail kit - amzn.to/43NKFYT 2: computer monitor plug - amzn.to/3vqJ6DF 3: On/off switch - amzn.to/3xal9Rh 4: 4 pin panel mount connector - amzn.to/3vr2S1Q 4.5: 2 pin panel mount co...
CNC Plasma Business From Scratch | Pt. 1
Переглядів 12 тис.6 місяців тому
Thanks, to JD's Garage for inspiring me to make this DIY CNC Plasma Cutter. Products used in the video/Amazon associates links(I earn commission if you choose to purchase these products at no extra cost to you) 1: 608zz bearings - amzn.to/3vJOEJj 2: r4-2rs bearings (smaller ones, x-axis) - amzn.to/3xbFCVS Welcome, fellow creators and aspiring entrepreneurs! In this compelling video, I'm embarki...
Starting a CNC Plasma Business | Step 0 (make money the smart way)
Переглядів 20 тис.7 місяців тому
Products used in the video/Amazon associates links(I earn commission if you choose to purchase these products at no extra cost to you) 1: Blue Yeti X USB Microphone amzn.to/4bpbKnP Passionate about CNC plasma cutting and sign making? Learn how to kickstart your own business even with limited resources. I'll guide you through a savvy strategy: outsourcing your plasma cutting needs while you focu...
I Made Noob Saibot's Sickle From Mortal Kombat
Переглядів 57610 місяців тому
I Made Noob Saibot's Sickle I wanted to make one of my all time favorite mortal kombat characters choice tool. Noob Saibots Sickle. This is a similar build with what i did with scorpions kunai. This was just a quick project. Let me know what you guys thought below. Website: www.thyialindustries.com/ Social - Instgram: @ThyialIndustries@ThyialIndustries TikTok: @ThyialIndustries
Grateful For Opportunity | The Rag Tag Shop Pt. 2
Переглядів 12311 місяців тому
Grateful For Opportunity | The Rag Tag Shop Pt. 2
This Is The Most I've Ever Had | The Rag Tag Shop Pt. 1
Переглядів 433Рік тому
This Is The Most I've Ever Had | The Rag Tag Shop Pt. 1
Super Simple Nesting Box Plans Made Cheap
Переглядів 8 тис.Рік тому
Super Simple Nesting Box Plans Made Cheap
Reflecting on College: Did I Make The Right Choice?
Переглядів 87Рік тому
Reflecting on College: Did I Make The Right Choice?
First time getting CHICKENS | Getting the coop ready
Переглядів 85Рік тому
First time getting CHICKENS | Getting the coop ready
Unboxing Gone Wild: Dewalt Job Site Table Saw
Переглядів 451Рік тому
Unboxing Gone Wild: Dewalt Job Site Table Saw
The Comeback: Life Update After a Hiatus
Переглядів 47Рік тому
The Comeback: Life Update After a Hiatus
ZERO to 637 Subscribers. The Clocks Ticking. A look back at my projects. What will 2023 hold?
Переглядів 737Рік тому
ZERO to 637 Subscribers. The Clocks Ticking. A look back at my projects. What will 2023 hold?
Raw Materials to Stunning Creations: DIY Metal and Wood Bar Stools
Переглядів 863Рік тому
Raw Materials to Stunning Creations: DIY Metal and Wood Bar Stools
I embarrassed Myself But What's The Take Away?
Переглядів 30Рік тому
I embarrassed Myself But What's The Take Away?
Someone wanted to sell me their business, should I take it?
Переглядів 362 роки тому
Someone wanted to sell me their business, should I take it?
Here's How I Learned To Weld - I didn't want to be poor!
Переглядів 502 роки тому
Here's How I Learned To Weld - I didn't want to be poor!
One-of-a-Kind Creations: Designing and Fabricating Custom Metal Signs
Переглядів 1172 роки тому
One-of-a-Kind Creations: Designing and Fabricating Custom Metal Signs
Unexpected Disaster: MELTING a $300 Vape Stand & Crafting a Redemption
Переглядів 1262 роки тому
Unexpected Disaster: MELTING a $300 Vape Stand & Crafting a Redemption
Weird Flexible Metal. A Simple Explanation #fabtech2023
Переглядів 1,8 тис.2 роки тому
Weird Flexible Metal. A Simple Explanation #fabtech2023
great video man! im 22 starting my plasma cutting business. it somehow turned into a headache rack, bumper and rock slider business lol. have you thought about selling on etsy?
@@benny7132 awesome! And yes I thought about Etsy. But I'm struggling with how to ship heavy metal pieces economically
Well done mate
@@MattysWorkshop 👍
For anyone worried about the cost of filing for your llc, you can generally do everything for 1/3 to 1/4 of the cost of filing services and it will basically involve entering the exact same amount of data. Go your your state's official"Secretary of State" (.gov) website and follow instructions there. Filing services are fine too if you don't mind slightly overpaying for convenience
GG on getting YT income, but do not; let the YT algorithm dictate your publish schedule. Do the content first, then publish Don’t let the publish date, dictate making “something” to appease the machine
@@nemesis851_ I'm trying not to. I'd like to think I would always put the quality of the product first and video stuff after
👍🏻🤜🏻🍺
@@agguilarmetalwork4494 cheers 💪
despite everything u went through, I loved your videos and we learned a lot from you. I live in Africa Rwanda and i had ideas to start such business since real estate is booming here and providing this service can be lucrative but the cost of owning this machine is still way ahead of my time and the knowledge u had building one i don't have it but if it was something possible i would have gave it a though. i have only 1500$ on my name and building it now also is impossible from what i leaned from your videos but i am still on for the general idea start this business since i see the potential it has. looking for investors to partner with will be the deal for me. So you did well educating us on your journey that is what i wanted to say, Thank u.
@@bigice1774 just pointing out. You can build this machine for about cheaper! Or just won't be as large or versatile as mine. People have made other machines under $500
Loved your video; brilliant! I got a copy of your plan which will be so useful. Thank you!
@@RossIsaify awesome!:
Hello Do you have a THC installed?
@@takudzwamatangira2250 not yet. But hoping to get one soon!
I need a good welding table so bad...
@@RenegadesGarage it's definitely helps get the job done
What a cool way to have a budget friendly machine torch. I have a Lotos 5500 DCNC would this work for this
Yes! I've seen others do this with that exact machine
Thanks for leaving all of the mishapps in the video, that really helps people like me see the real world problem spots in advance. I'm a total new bee and will be making every mistake in the book, but may be able to avoid a few by watching real demonstrations with potential problems left in the video. Thanks for sharing.
@@photorealm yes sir. I always try to leave those in for your exact reason!
I can't believe that there aren't more elegant solutions for touch height control.
@@mrburns366 there are a few.. but they get expensive!
@@ThyialIndustries yeah, and most of the ones I've seen control the z axis independently from the PC which i don't really like.
Do your motors get hot, like 130 degrees F ? My bigger one gets pretty hot but I hear that can be normal.
@@photorealm mine do get warm. I haven't checked actual temp, but yes they are made to run warm
I always wanted to make one, soon, hopefully. I like the aluminum piece
Go for it! It's been fun
I like it
Me too.... Me too 😅
This is cool
Yes sir... I'm trying
I've been wanting to make one myself
@@somethingtowatchhere do it!
Another factor that should be considered is that a commercial piece of equipment has resale value, whereas a custom build does not. At my age, I must consider this when making the build vs. buy decision as my family will be tasked with disposing of my tools and machinery when I'm gone.
@@gaiustacitus4242 yeah that's a good point. Though, I have seen a few diy builds on market place... I always tend to steer clear of them because I'm not sure if the guy who was putting them together knew what he was doing.
@@ThyialIndustries I've watched enough videos of DIY builds to see that most home build enthusiasts know very little about mechanical and/or electrical systems design and fabrication. Very few builders know how to ensure flatness and parallelism of the linear motion system. Of course, they are generally happy if their products are within +/- 1/32 of an inch of the design. The wiring of most DIY builds is certain to cause random mispositioning as a result of electrical noise. That said, many of the commercial designs do not use shielded cables and electronics enclosures, either. Even knowing how to fix any issues I may find I would be very hesitant to purchase a used DIY CNC machine. Buying used machine tools is always a crap shoot. It's almost as bad as buying used audio cables (which is why resellers like Guitar Center will never buy them).
@@gaiustacitus4242 🤣 yes a lot of good points!
Gday, fantastic video and very informative, much appreciated mate, cheers
@@MattysWorkshop thanks for stopping by!
Thanks to share your thoughts and experience, 🙏🏾 It’s very helpful💪🏾👍🏾 It dépend what are your expectations, I know the amount of the price of Langmuir is expensive but you have the security and peace, and this have no price when you WORK with it all day. Time is just si precious, we can’t buy it.. so 6 month is too much even you learned a lot !! I wish you good luck for your work, you are so motivated, and I appreciate it, I am pretty sure you will have suces 🤞🏾🤞🏾
@@MegaSoyaMan right! Like I said in the end... It may have been more beneficial to just a buy a machine from the start!
Thanks for this video. I was wondering how much it cost. I bought the XR from Langmuir. Just waiting to finish running electrical to my shop so I can use it.
@@rantiksadventure1920 I went over all if the cousins in the video lol. But I'll give you a break because it's a long one! It ended up being around $5,200 with the majority of the cost going to the hypertherm plasma cutter
I was on this path for a year until I got a part time job that ended up consuming my life. Content creator building a DIY CNC gantry mill paying the bills as a handyman. It took four months to build the machine, another month to get it working, and then it sat because in using it I discovered that cheapening out on the bearing design had seriously limited it's accuracy to the point where I couldn't hope to produce anything worth selling. Scrapped it and started over on the design that I had wanted to build now that I had the income to afford the parts and the 3D printer to make them.... and my last update was about a year ago because my job has crushed my soul while making me dependent on a steady income and comfortable in misery. Literally the parts have been sitting there for a year in my shop waiting to be put together with just a little fabricobbling. Well, I still have to design the Z-axis, but I have the design in my head, it's just a matter of actually doing it in CAD and printing the relevant parts. THEN I am going to cut all the parts out of pink foam and cast them in aluminum. machine them, then replace any wood/plastic with metal, and tubing with solid 1045 ground shafting(sitting next to it still in the packaging). Well after I get grandpa's Logan Model 200 back together, but I genuinely am almost done with that one. I'm looking at building a plasma table like yours after I get the 10W diode laser engraver working(it's built, just needs the 3D printer electronics hooked up), and the multi-material 3D printer for prototyping ONLY. I plan to make powder-coated steel signs. I DON'T WANT a print farm, and am looking into outsourcing it to SLANT3D using their Etsy plugin. You're absolutely correct about simply buying a working machine versus building one. There is a catch - you have to be able to afford to buy the machine. I can afford to buy a few hundred or even a few thousand dollars in parts over the span of months. I CAN'T afford the up front cost or get a loan/credit. Point of all this rambling is that I kinda know what you're going through, you're doing better than I am (you have customers and a working machine), keep at it, I know you're going to do well.
@@bootstrappyworkshop8367 thanks for the comment. Definitely puts me at ease knowing there are others that have/are going through some of the same struggles I'm going through. Hopefully you can get back to your project soon!
Something else that has value, but you can’t put a price on; is KNOWLEDGE If you bought the Langmuir, you rely on the business for support as long as you have that unit. Since you built yours, you KNOW how it works forever!
@@nemesis851_ yeah, that's a good point. Probably one of the biggest reasons why I decided to build in the first place
That's definitely a major double edge sword. Less you know ever small detail but you are completely on ur own for the most part, but with langmuir you have any issues you send them a email and they help to figure everything out and possibly even send you new parts
Lifetime Warranty = lifetime of the product, or more likely ; the lifetime of the business existing (or a cloud service, or until a data breach occurs)
Thank you for the drawings!!
@@neepost2726 you're welcome!
Are you by chance putting out the spreadsheet with the links for your build anytime soon?
@@michaelleon4516 I have links to a lot of the components in the description. As far as an entire, spreadsheet...or plans. Not anytime soon, but hopefully in the future
I recommend using a magnetic plasma holder just to be safe if the torch for some reason get stuck on a metal part it can broke and that part it’s 🤑
I have one picked out! Just waiting till I'm done with moving before I get too crazy 🤣
🤜🏻🍺👍🏻👍🏻👍🏻
Yes sir
If the maths aint mathing just know there was a span of 1.5 months that I was making this video... During that time i was updating the BOM with other parts... so the numbers aren't 100 percent accurate. but this will give you a very good idea of what you can expect when building your own!
After working in industry where I had to fabricate or have fabricated parts for fixturing test set ups and things like that (engineering technician), once I had a prototype that worked I would either have someone build it or get a business license and use whatever credit I could find to buy up to something like a Tormach or other system that can do a lot in a small footprint with very little support. Service contracts are all part of regularly accepted business expenses so there's not really a reason not to do them - in some manufacturing cases (Carbon3D is one in particular), you can't even buy the equipment, only lease it, and their processes are patented so you're not allowed to copy for profit. I don't agree, but those are what I've observed.
@@russellzauner I thought about doing something similar but was afraid i would not have enough business to make the payments.
That’s excellent work my friend. I also built the JD plasma table. After learning all the fails and trying to make it better, I ended up building an entirely new table. This CNC community is badass!
@@GroundedConceptsLLC agreed, everyone is super helpful, and definitely not shy in telling you want would work better! 🤣
Great video, it´s important as a entrepeneur to see what advantages you have and how to take advantage of them, what is you degree, you sais you are a engineer and you are looking for make your own CNC machine, but how will you develop the system, i understand you could weld the structure and I will waiting for what i´t s coming, nice detail of addying subtitles, it gets a lot to understand what you are doing. Greetings from México.
@@noscartrujillo8477 thanks! I'm an electrical engineer
Supreme leader, "The shape of the missile has nothing to do with the aerodynamics".
@@naeemullah6976 🤣🤣
I saw another guy he made a mix with baking soda in the water to get the pH levels over nine so it doesn’t cause rusting maybe you can give that a try
@@robertgonzalez8419 I saw that too. While that might work, I'm just about to order a 5 gallon bucket of sterling cool. Out of all the research I've done, they seem like the best option
I would never run a plasma cutter like this that close to wooden walls. That is a fire hazard waiting to happen, sorry to say. You should fire proof the wall with ceramic tiling, sheet metal or a layer of concrete.
@@Luka1180 🤣. The thought did cross mind
Just put up some cement backer board easy cheap solution. Diy solar guys use them to mount inverter to for fire protection if the inverters catch on fire and they hold up to heat great. Class A fire rating. Screw it up just like drywall and call it a day.
@@tangodown2721 yeah I suppose that would work
I would be carefuil about the sparks burning and/or melting the belts... Perhaps you could add a metallic shield above the actual plasma tool? Or isolate the belts with some kind of metal tubing or glass tubing... or maybe polycarbonate.
@@Luka1180 the betls are cheap enough that if the do break I can replace them very easily. But that's not a terrible idea
@@ThyialIndustries Still, but I just had a potential idea for a solution. Some kind of cover along the sides, which the moving gantry then takes along with it. Yes, it would poke out at either far end of the machine, ofc, which could be awkward, but it would save you the little money that the belts do cost in the long run. A dollar saved is a dollar made. It can be as simple as clear acrylic, or clear polycarbonate. Or very, very thin sheet metal. Rectangular. If you do this, use material as light as possible to keep the speed up, ofc. Not too much wobble, though, as stiffness of the gantry increases the speed you can do just as much as lowering innertia.
@@Luka1180 that could definitely work 🤔
I have mine built just like yours with the updated jd garage electronics unsure how to get both y motors in the program if you do put plans out I’d definitely buy them
@@QuentinEnriquez-q4l it's not super difficult. A quick Google search should help
Do you drain your air compressor tank often? I mean from the bung at the bottom of the air tank. I'd purge the condensate from there more often, and see if you're getting more life out of the water-trap/dryer.
@@TH3_T3RM1N4T0R I drain the compressor before every use... Lol
@@ThyialIndustries I suppose it's quite humid over there. Anyway, awesome job, it's a pretty cool machine all things considered.
@@TH3_T3RM1N4T0R 😅 thanks! I imagine I'm doing something incorrectly. Just have to figure out what it is
@@ThyialIndustries I'm sure you will get it sorted out, best of luck with your future endeavours mate.
What size is your able cut?
Little over 4'x3'
Hey there. Remember i was saying a power / speed calibration run? Well I couldn't find the videos I was looking for until, someone else I follow made this video XTool S1 40W - Best Diode Laser 2024? Let's find out - the hardwareguy posted Aug 29 Jump ahead to 4:45 in the video, where he creates a pattern grid, of specific speeds, powers, and if you do something like that on a variety of materials, you can refer to them as reference sheets, when you have to cut on that material again in the future
@@nemesis851_ ohhh yeah ive seen that before! Ive used when working with wood lasers. Maybe I can use it with the plasma cutter too?
What type of plastic is it ?
@@proactivex uhmw
@@ThyialIndustries Thankyou.!
Why does this video have only a thousand views?
niche topic i guess?
What was the total cost for you to build the table?
@@rantiksadventure1920 I'm making a video with a complete cost break down as we speak! Stay tuned
Nice
@@rantiksadventure1920 yes sir!
What’s is your name of software you use for drawing
@@ultraflexprotectionpro solidworks and fusion 360. If the parts are simple I will use inkscape
That’s what she said! (6:46)
@@rantiksadventure1920 🤣🤣
Hopefully you don't let that wet air sit in the compressor tank for any longer than you need it! IF you leave it in the tank it will get rusted and can explode.
@@noisefekt I try to drain it before and after every use!