![Brokenasscrx](/img/default-banner.jpg)
- 137
- 324 956
Brokenasscrx
United States
Приєднався 29 тра 2017
Automotive junkie looking for the next fun ride. Take a look around and follow some of my latest builds!!
Test and Tune on the Ls Swapped Obs/Sloppy Stage 2/Straight Pipe
What's up UA-cam?!?! We did it! with plenty of hard work, dedication, and some good people along the way, frank made it out to its first cars and coffee. Some small pulls along with some cruising shots of frank. Overall extremely pleased with how it went. Still some figuring out left to do But were out and about!! Don't forget to check out the rest of the channel and hit that subscribe button!! Yall have a nice day!
@turbo_coptruck
@rtperformance9261
@turbo_coptruck
@rtperformance9261
Переглядів: 66
Відео
DIY Harness Bar for the LS Swapped Chevy!
Переглядів 50Місяць тому
What's up UA-cam!?!?! You read that right. I built a harness bar for Frank because I couldn't find a logical solution for my racing harnesses. Of course there are other options out there, but I wanted to take my chance on building something more budget friendly then the high priced or "universal" options. Check out this install/build and let me know what y'all think. And as always, don't forget...
Steering Box/Gear Replacement on a 88-98 Chevy Silverado (and power steering pump)
Переглядів 1632 місяці тому
Steering Box/Gear Replacement on a 88-98 Chevy Silverado (and power steering pump)
5.3 Ls swapped Chevy Obs Silverado first test drive!!
Переглядів 5113 місяці тому
5.3 Ls swapped Chevy Obs Silverado first test drive!!
I had to call a toe truck and not for Frank!!
Переглядів 384 місяці тому
I had to call a toe truck and not for Frank!!
Ebay Hot Rod Wire Harness Install on a 88-98 chevy obs c1500 pt. 2
Переглядів 1014 місяці тому
Ebay Hot Rod Wire Harness Install on a 88-98 chevy obs c1500 pt. 2
Holley Terminator X max install in a chevy obs c1500
Переглядів 6945 місяців тому
Holley Terminator X max install in a chevy obs c1500
Unboxing the Holley X Max for the ls swapped obs c1500
Переглядів 1766 місяців тому
Unboxing the Holley X Max for the ls swapped obs c1500
How to build a Aluminum Racing Dashboard for a 88-98 Obs Chevy 1500
Переглядів 2226 місяців тому
How to build a Aluminum Racing Dashboard for a 88-98 Obs Chevy 1500
Ebay hot rod wire harness for a 88-98 obs Chevy 1500
Переглядів 1547 місяців тому
Ebay hot rod wire harness for a 88-98 obs Chevy 1500
Axle flip kit and c notch install on a c1500 obs silverado
Переглядів 4,1 тис.7 місяців тому
Axle flip kit and c notch install on a c1500 obs silverado
This LS Swapped Silverado is going to be Insane!
Переглядів 1068 місяців тому
This LS Swapped Silverado is going to be Insane!
Dropping some weight on the LS obs chevy
Переглядів 858 місяців тому
Dropping some weight on the LS obs chevy
It's Alive!!(frank the Ls swapped obs chevy runs!)
Переглядів 758 місяців тому
It's Alive!!(frank the Ls swapped obs chevy runs!)
FL2k 23 (and a update on the projects)
Переглядів 2599 місяців тому
FL2k 23 (and a update on the projects)
The answer to the cop truck! I reveal the new channel ride!
Переглядів 1919 місяців тому
The answer to the cop truck! I reveal the new channel ride!
How I am building my roll cage(awd crx build)
Переглядів 2549 місяців тому
How I am building my roll cage(awd crx build)
How to convert a Crx to awd part 2(Awd d2b crx build.)
Переглядів 2,3 тис.9 місяців тому
How to convert a Crx to awd part 2(Awd d2b crx build.)
D2B Awd Crx gets some love!! ( How to convert a crx to awd)
Переглядів 2,4 тис.10 місяців тому
D2B Awd Crx gets some love!! ( How to convert a crx to awd)
Unboxing a S1built Awd kit for the green d2b CRX
Переглядів 27710 місяців тому
Unboxing a S1built Awd kit for the green d2b CRX
How to install a cold air intake on a 99-07 Silverado/Suburban/Tahoe.
Переглядів 54610 місяців тому
How to install a cold air intake on a 99-07 Silverado/Suburban/Tahoe.
Finally, AWD Crx with a d2b setup!
Переглядів 1,2 тис.11 місяців тому
Finally, AWD Crx with a d2b setup!
How to clearance a d16z6 for Eagle rods
Переглядів 22311 місяців тому
How to clearance a d16z6 for Eagle rods
6 Point Roll Cage Work in a Honda Crx SI
Переглядів 296Рік тому
6 Point Roll Cage Work in a Honda Crx SI
Looking into this mysterious knocking noise: part 1
Переглядів 40Рік тому
Looking into this mysterious knocking noise: part 1
Florida Super Meet, even saw Nursing Garage
Переглядів 88Рік тому
Florida Super Meet, even saw Nursing Garage
Class in session... 🎶🎙🐐 🦧🎸 🦦🪕 🥁🐒
Im more of a "im actually broke and can't afford a burger at mcdonalds" kind of guy
Life building cars
I’m more of a 5.9 Cummins guy
@@TommyC1027 to each is own 🫡
That’s not launch mode- that’s just moderate acceleration
Good job bro and fabrication. You made it look so easy but I know you must take your time to make everything line up which you did. Awesome. Time to do my CRX now.
@deebee9751 thank you 😊 working to get back on this finally and move forward with the rest of the fabrication. Stay tuned to see it done! Also you definitely should. S1 made that kit extremely easy and straightforward to do.
🐌
@@malvern4464 🤣🤣🤣
Would love to be in there...just pinned to the seat.
Phuckatesla...🤢🤮
What's it turning into now?...
Welcome to $+$-$/3=-$$,$$$ work.... why?: because racecar...
Love your dog there to help with the flash light 😊
@@loks2315 he's a great supervisor as well
f100
@@zlokyo can't go wrong with that
Mazda Miata
@@uhAlphaFox that would be a blast in that little thing
Ecololine
That's a different idea 🤔
Lower the music, it's a major distraction for a very instructive video.
Pinto 😂
@@kevinhurst1375 that would be fun
A Mid engine Festiva... call it: a Ford Frenzy or sum sh!t
Cop Truck... 😂
@@BackyardClunkers77 🤣🤣🤣🤣 I doubt that he would ever go ford
@brokenasscrxnick7125 na he's a chevy guy through and through @babracingcop_truck
Is it going in a Ford derby car?.... 😄🤟
@BackyardClunkers77 lol that would be a upsetting derby car
My brother Juan got decapitated after hitting a ditch in a golf cart. Shit happens! RIP Brother 😔
Carlos campos 😂
@@revin8894 who's that? My brother was named Juan
@@hagee2995 my dogs name is Carlos 🤔
@revin8894 I had a Rotty named Erin, but she ran away with another dog 😔
Show and tell for trolls
@@Bigcuz.03 gotta help them understand sometimes
I bet that Hiazhunter has experiences with face plantings 😂 some people haven't learned to wear seat belts... Or maybe they stuck in the Lap Belts era. 🤣
Try not to have a blowout, as it turns out fiberglass beds don’t like projectiles at 200 mph
@@Im7heon1yone not many bed sides would like that 😄
Facts
One... eternity láter...... 😮
@@BackyardClunkers77 owch......
@brokenasscrxnick7125 Don't feel bad, the 66 Hell Fish is in the same boat... I wanna see & hear it running around the track.... 🤟😆🤙
We both been procrastinating on each project 😢
@@BackyardClunkers77 in good time things will be sorted out
@brokenasscrxnick7125 after the Scion, & a rusty 1st gen cummins Ram rocker panel replacement job, I'm back at the HellFish. 🤙 Let's see both the crx & HellFish done by end of this year? Or at least 90% done & drivable...
Get it done boy!!!!!!
🫡🫡
That dash will kill whoever is in the truck if it has even a fender bender
As if this is the first guy ever to build a dash like this. Look at the rest of the videos he has safety belts.
A dash kills people that don’t wear seatbelts on the daily
That's a nice dash for a face plant 😂
Guess you haven't heard of a racing harness?? #haters #automotive #racing #shorts
Idk why you put a laughing face like your comment was funny. But being strapped in might bruise a rib but he ain’t hitting the dash. Now I’ll laugh like it’s funny too 😂
@@Bigcuz.03You don't have to get all butthurt over a little humor.
@@Hiazhunter not butt hurt but it also wasn’t humor. Just a negative comment for no reason
It does amaze me how many people put themselves in stupid positions While You're Building crazy shit
I'm definitely gonna get a few of those stickers for my welding projects
They are perfect 👌
Frank got sum go go juice now... 🤟😆🤟
Just a baby bottle 🍼
@brokenasscrxnick7125 just a lil sippy cup, just a taste... That's all it takes before it's laughing all the way down the strip & it's hooked on a drug problem... Test out Frank's allergies, let's hear if it has the sniffles & baby sneeze. 😄
Depends what you consider a sneeze 😂
Not backfiring 🤣
Awesome!!
Don't push me! Push a push pop!
🤣
Was that one of those hurry up Phuckit its Friday builds?, or a Hangover Monday mornings?
Almost one of the worst ones I’ve seen
The second one shown is actually a factory correct one on some GM vehicles, it’s the larger of the two options for Fixed Orifice tubes.
How does someone fuck up the backlash and pinion depth THAT BAD
I think a leading hidden factor in this was the pinion angle of the diff. It was pretty off.
I think you got that lash set a few inches off... 😹
🧐 mhmm looks like a good pattern tho 😂
New gear unlocked😎
😂😂
[💨💣🛎🎉] Achievement Unlocked, Overdrive is now available for purchasing...
it will be ok just add thicker oil to it.
🤣🤣🤣🤣man
Great video. I was curious about the height with a flip kit and no notch.
Thank you! Also, keep in mind that I have updated the rear u bolts. I don't recommend the way I did it in this video, I bought longer u bolts and went around the axle tube itself.
Is it hard to replace the seals on a ford fusion sel
I've been doing automotive A/C work since 1986 and I've never heard this thing called an "orfix tube."
Doing the same soon myself with 3 of these mfs
This is the aftermath when a gear head "heads to the golf course"....
🤣
[mechanics driving a golf cart]: "Dude what's these straps for in the back?" "It's to hold the nitrous bottle"... one strap for the nitrous, one for the fire extinguisher..." lol
Oooo sour apple... 🤪
The one that looks like rock candy is not bad/faulty it was made that way. I have seen a few I think usually on GM vehicles.
I don't think it was made that way...... definitely contaminated.
@@brokenasscrxnick7125 i thought the same thing the first time I saw one. Seems they only came from the factory in that configuration and all the aftermarket replacements look like the first one
Ac delco 15-31053 is the part number
@ericgunter45 From my research, I haven't found any oem one looking like this. Yes they vary in style, but nun that come pre clogged.
@ericgunter45 I see the similarity, but still this one is contaminated
The problem is they don't provide an easy way to replace it. A shutoff valve before and after would be nice.
With the right equipment, it's not a hard job.
I've replaced hundreds of those way back when. Never saw one come out looking anything like that.
That was my thought 🤣
Orfix tube? Never heard of one. Orifice tube guy.
pronunciation police, my bad 🫢
Tomatoes, tow-mat-tows... Tom-A-Toe...
Too much water in the system. Replace the receiver dryer.
You should replace the dryer any time you open the system
And completely flush out the Entire system !!!!
Nice