![phog_vision](/img/default-banner.jpg)
- 40
- 188 487
phog_vision
Приєднався 16 тра 2008
2015-2020 Yukon Sun Visor Replacement
I had to replace my sun visor and figured I might as well make a quick video about it. Pretty straight forward but always good to see someone who already had to do it.
Переглядів: 303
Відео
2015-2020 Yukon Door Handle Replacement
Переглядів 1,7 тис.10 місяців тому
I couldn't find a great video showing how to replace door handles on this generation of full sized GM trucks. Hopefully this is helpful if you're trying to tackle this project.
2015-2020 Yukon - Service Rear Vision System - FIXED!
Переглядів 14 тис.10 місяців тому
Have you gotten the dreaded blue screen with those awful words, "Service Rear Vision System"? If you have a Yukon, Tahoe, Suburban, Sierra, or Silverado this video might fix your issue. NOTE: If your camera issn't working check your reverse lights. Mine were not working along with the camera. That's what lead me to the fuse block under the hood.
Jaymoo Custom Lightsaber Blade
Переглядів 74310 місяців тому
We dive into the custom lightsaber blade by Jaymoo for the Disney Parks lightsabers. Is it brighter? Is it better? Check out the video for more info! Check out Jaymoos Playground on Etsy: www.etsy.com/shop/JaymoosPlayground Also check out the Jaymoos Playground UA-cam page: ua-cam.com/users/JaymoosPlayground
Rheem 36kw Tankless Water Heater Install
Переглядів 19 тис.Рік тому
*DISCLAIMER* I am NOT a professional or expert. I am a DIY home owner. This video is NOT step by step instructions on how to install a tankless heater. It's simply an overview that hopefully helps others trying to figure out if they should attempt to do this themselves or hire a professional. I made the video simply because I couldn't find a lot of resources out there and hoped this would be he...
Ryobi 40V mower self propel fix
Переглядів 25 тис.2 роки тому
The self propel feature on my 40V Ryobi mower stopped working. Ended up being an issue inside the on/off button housing.
Can you put a ROKU in a GMC Yukon?
Переглядів 9 тис.2 роки тому
You sure can and it works amazingly well!!! As long as you have internet via vehicle or phone hotspot you can make this work. I originally tried an AppleTV but some finicky power issues led me to using the ROKU instead.
Can you put an Apple TV in a GMC Yukon?
Переглядів 1,8 тис.2 роки тому
The quick answer is yes...BUT. As long as you have internet via vehicle or phone hotspot you can make this work. One issue is the factory 120V plug uses a modified sine wave inverter which the Apple TV doesn't like. You'll need a pure sine wave inverter. The biggest issue is when the car is turned off it cuts power to the power outlets. After that the Apple TV needs to be unplugged for 30 secon...
ROTR Virtual Queue Guide - LIVE VIDEO VERSION
Переглядів 2,8 тис.3 роки тому
A quick guide for getting a boarding group for ROTR.
Savi Custom Lightsaber - Is it too fat, expensive and cartoonish?
Переглядів 554 роки тому
An overview of a Savi's Workshop custom lightsaber.
Savi Custom Lightsaber Function - Does it sound and look good?
Переглядів 424 роки тому
An overview of the function, lights and sounds of a Savi's Workshop custom lightsaber.
Savi's Workshop custom lightsaber VS Disney Parks Rey lightsaber
Переглядів 1144 роки тому
Compare and contrast a Savi built lightsaber and a Disney Parks Rey lightsaber.
Savi Lightsaber RFID HACK! - Get all 6 colors with 1 kyber crystal
Переглядів 1,6 тис.4 роки тому
You can use an RFID reader/writer to change your kyber crystal code to unlock every color and sound profile for your Galaxy's Edge Savi Workshop lightsaber. This can also be used to unlock different voice profiles for holocrons. Here's a link to the reader used in the video. www.amazon.com/dp/B07VB46289/ref=cm_sw_r_tw_dp_U_x_6DWzEbV24JGWD
2018 Evoque 2.0T Ingenium - Air Filter Change DIY
Переглядів 3,9 тис.4 роки тому
NOTE: It's been brought to my attention you don't need to remove the MAF sensor or air intake tube. Loosening the 6 screws around the air box should be enough to get the filter out. 2018 Evoque 2.0T Ingenium - Air Filter Change DIY Tools needed: - Large flat head screwdriver (hose clamp). - Small flat head screwdriver (air flow sensor clip). - Philips screwdriver (air filter housing screws). Pa...
2018 Evoque 2.0T Ingenium - Cabin Air Filter DIY Replacement
Переглядів 17 тис.4 роки тому
2018 Evoque 2.0T Ingenium - Cabin Air Filter DIY Replacement Tools needed: - OPTIONAL: something to get the clips out. I used this auto trim removal kit from Amazon (tinyurl.com/vujjfpj). Cost is $9. - A crap load of PATIENCE. Part # LR056138 Amazon link: tinyurl.com/qwq58aj Cost: $20
2018 Evoque 2.0T Ingenium - Oil Change DIY - INCLUDES service warning reset
Переглядів 37 тис.4 роки тому
2018 Evoque 2.0T Ingenium - Oil Change DIY - INCLUDES service warning reset
tanner the wheaten terrier chasing bubbles
Переглядів 9010 років тому
tanner the wheaten terrier chasing bubbles
wheaten terrier and black lab play in the snow
Переглядів 14410 років тому
wheaten terrier and black lab play in the snow
tanner the wheaten wants the pterodactyl!
Переглядів 1310 років тому
tanner the wheaten wants the pterodactyl!
furnace code light after fan failed to start
Переглядів 22210 років тому
furnace code light after fan failed to start
Can this go outside ?
What is the name of the part? Lol
Excellent presentation and installation, Thank You!
I just got mine, super exited.
Oh hopefully mine is that simple!
I can’t believe how useful I’ve found ur evoque videos over the last few years, fantastic thanks once again. Cabin filter still not easy though.
@@rayoakley6669 glad they’ve been helpful!
Hello, When should the engine control chain be replaced?
Thank you for this! Also I have an HDMI to USB converter and it's now showing up, can you help me on this?
My drive is working intermittently, this seems like it could explain it. Thanks!
What type of inverter box do you have??
I can't find the oil filter removal tool for the life of me... where did ya buy yours
I found mine at Walmart. Here’s the linky: www.walmart.com/ip/Hyper-Tough-64MM-Oil-Filter-Wrench-Model-4207/836772683
Came looking for this exact solution. Thanks for posting!
Happy to help!
Merci 😊
De rien. 👍🏼
You da real mvp
Glad it helped!
I think I'll let the dealer do it
What ones the part number on the label I need one for my Yukon
How Did you get it to Show on the front Screen? I CANT FIGURE IT OUT, SHOWED ON REAR SCREENS FOR A BIT BUT WENT AWAY
Screen in the front dash only works when in park and you select media(I think). Rear screen should work when you select AUX input from the rear screen.
Thanks for this great video. My problem was this exact issue. But, I too, had a challenge figuring out how to connect the starter button. I ended up leaving it outside of the housing for the short term.
anyone going to point out the amount of sludge on that old filter?
Per code you need a form of disconnect for your electrical at the water heater. Can’t go just straight in with conduit, you should have a fused disconnect on each circuit.
Interesting. Both the heater and circuit breaker are in the garage within site of each other. Is that enough?
Do these self-propelled battery mowers have belts?
but the service reset procedure...doesn't update the km for the next service on my evoque td180 2018...it never updates it..
Tell her you are General Grievous, and you collect the lightsaber hilts of fallen enemies.
Got the same one, and yes the flickering of the lights every time we use hot water. My son thought the bulb was going out. But yes it's a small problem, other then then that it's spotless.
Luckily I found your video because my self propel feature stopped working all of a sudden after one season of mowing. Take it apart and both the molded plastic L shaped piece and the dowel sheared off at the base. Basically the same problem you illustrate. What a piss poor design Ryobi for a $400 mower! I'm going to try and tack it back in place with super glue so both pieces stay in place while I then reinforce the base of both pieces with epoxy. Should be fun. I think if I buy the new part it will only wind up breaking again due to the poor design of the molded part. They should have molded in a tapered feature or thickened the base wall at the bottom to eliminate the stress riser there. Thanks a bunch for posting this, very helpful!
Great video
Yup that’s what happened to me
Thanks for posting. I occasionally get this message and was going to start by replacing the camera. Somehow, I knew it wouldn't be that easy though. Your video may save me hours of chasing.
So I checked all the switch. My mower turns on and off. When I try the self propelled it makes noise and doesn’t engage. So I need to remove the transmission? How do I do that
Hola!! Que clase de adaptador y que roku usastes, el mio me sale q no lo soporta, tngo una 2015 yukon denali xl
Utilicé el traductor de Google, así que espero que esto funcione. Aquí está el adaptador de Amazon: a.co/d/hfUkwzO El Roku es el Roku Express 4K. ¡Espero que ayude!
Thank you, I'm sorry I wrote this in spanish, I go to try it in ur way, Thank u
@@melvinmarroquin5356 no need to apologize. Technology for the win! Hope you get it working in your Yukon!
I hope that too, thank u
insteadof using 4x40a why cant you use 2x80a brakers
I too am not an electrician, but I would be concerned using 2 x 80 amp breakers, the load for each heating element is structured to shut down if it goes over 40 amps, if you put in 80 amp breakers there will be no fault on any single element till 80 amps is obtained….i would be skeptical…just my opinion.
My self propel stopped working months ago. I've been just pushing the mower 🥵 This was my exact problem and got it fixed. 👍🏻
Glad I could help!
Now im curious!! How HOT was the water?? You showing installing. but not showing the results, of how hot the water got! Thermal camera
Your comment got me thinking...so I checked it out. The water heater is set to 125 F. The water temp at two faucets, one close and one far from the heater, is 120 F.
Great Repair ! Gotta say though, I hope that mower wasn't expensive, because the gauge and strength of all those plastic parts is really cheesy and cheap. I mean, there are kids toys with stronger plastic parts than that thing.... Good luck with it, I have the Ryobi 40v weedwacker and so far it's still working, but the battery didn't last very long...
Thank you. I had the exact same issue. Wouldn’t have torn it apart it myself if I didn’t see your successfully fix. Even used your cushion idea. Great instructional video.
Glad it helped!
Can anyone tell me where the second switch to turn the mower on goes? It seems the most important part, reassembly, was left out.
My sister and I are both in our 70s and have Ryobi lawnmowers. We both love fixing things I told her my self propelled feature was acting up on the lawnmower, and she found your video and sent it to me. Your video is very well done. Everything you said on the video was important and after I watched it twice, I was able to fix my lawnmower! So, my husband and I owe you a great big thank you
That's awesome, you're the reason I make random videos of things!
Penso che il mio filtro non lo avranno mai cambiato in Concessionaria, in 40000 km ..lo farò io grazie
Amazing!!! Thanks man Question; what glue did you applied ?
I used super glue.
I could not find the size of the electrical knockout in the manual and we are installing this soon. Rheem hung up on me twice. Thank you for that information!!! This will save us the running around that you had to do:)
Thanks for the video. I used a golf tee to replace the plastic post that held the switch.
Great idea!
This is why battery mowers are so so stupid. They are designed to fail like this over time, where plastic pieces slowly wear from normal basic use, and it why I won't buy an electric mower.
Agreed. Lots of plastic on this thing.
Thanks! I'm going to give your fix a try.
I have the same tankless water heater and recently it stopped heating up water. Do you know how I can fix it. We have replaced the flow meter still don’t work
36kW is too much for residential homes. Only good if you have at least 300Amp house.
We have 300A service. In hindsight I could've sized down. Too late now.
Your tip of pitting the fat end on the scanner was incredibly helpful
thank you for the video ,, i am installing one just like it and will follow your direction to the T .. thanks again ..
Speed control is a common problem. Many go too fast to mow or even walk behind. Do you think that the speed control is a variable resistor that can be modified so that the propel motor would run slower?
Very thorough and well done. Thanks.