Відео

And how u take it off i wan to take it out of a pull a part vehicle

The string works great, I have noticed on the aftermarket handles the rear part of the handle needs a slight mod the slide ramp (i file a bevel onto it so it will slide in easier in conjunction with the front part sliding in behind the part you are holding with the string). If you do not do this it will take multiple attempts before you hit the sweet spot. Or just buy the Toyota handle.

Thank you for sharing this valuable information:)

Thank you so much, that’s really helpful!! ❤

I have a 02 passport and no offense but what the dude in the video is doing is absolutely ridiculous. That is so wrong that I think you might research a little bit.

Why can’t you just look at the transmission fluid compartment under the hood?

Thank you!

This video is very helpful even though it was from a year ago thank you for making if I have any more questions about the specific vehicle is it okay to seek your guidance in this because we have the same kind of vehicle that we do and my man is a duet himself to the guy but he's a young mechanic thank you in advance

Great video! Just to offer a suggestion…..always after removing the coils and before pulling the spark plugs use compressed air to blow dust dirt and debris out of the spark plug holes.

I kinda liked the 2 screws to mount..lower window to adjust...no one counts the pollution caused by junking cars that cant be fixed economically a dealer would gouge you 600 bucks to fo that..i bet thr mirror would cost 250

Gm cars are trash

Thank you

Thanks for your insightful video

Awesome. Happened to me today

Just want to say. You did a great job explaining and providing key information . The T-30 bit called out Noting it was a capture bolt The use of a cable tie - was a simple solution I have my part - thanks for the short explanation A+ For you .

Great help. Thanks for the video!

if its electronic throttle pedal you don't give it gas when starting. I got mine directly from the factory (2000) tho and it had a note on the steering wheel not to press the accelerator while starting. Any vehicle if you turn it over repeatedly like that its going to have trouble starting.

Your videos help a lot. Thank you for your help and for making these types of videos.

What was the purpose of having the car running at first but not during the topping off

What are your thoughts about what brand of spark plugs may i use for the same model?

very easy to do your self thank you for showing it takes all the guessing out of it and less chance of breaking parts

Son.......U got no kids???????COULDN'T even find the hole

Thank You

Thank you so much, you help me save some buck!!!!!❤

Since it's your daughters car and 7 kids... All i can say is... THANK YOU DADDA 🙏🙏💛🙏🙏 this video helped i almost wanna pay you for mines and your daughter with all the respect in the world

I have a 2004 Isuzu Rodeo and I put oxygen sensors cause of the engine light was on. Engine light is off now but my gear box won't go in park or reverse now.

I have a 94 model Isuzu rodeo. It's running really bad. It's not idiling very good. At2000; RPMs it starts to spit and sputter,and has no power. Now then if I turn it off and on real fast while it's running it seems to reset something and then it will run fine. It still has the idiling problem of up and down missing really bad. What can I do to fix the problem

Como va el testigo de precio aceite,?

what size torexbit does it take to get this apart

Your video helped me replace my mini van door handle with ease.Thank you so much for sharing your experience.

Amazing idea never thought about this

I always forget to bring mine on solo camping trips, but hell, what a great idea.

I bring a backhoe with the hydrolic pile driver attachment

cant nail it then screw it

You could also use a jack hammer to drive in steaks.

Where did you get the correct color of the mirror I need one for the driver side

how can I get in contact with this junk yard. I need the parts from the station wagon it look like 1983 - 1991 ford Crown Vic LTD Country Squire or a Grand Marquie. I take parts or the whole car.

I have the 2000 Holden Frontera here in Aus, its the same 6VD1 engine. If you look inside the intake manifold there behind the throttle plate there is a small tube for the EGR valve. I usually put a 2mm steel rope in the drill and run it up the pipe to clear out all the carbon. This becomes blocked on mine about every 20,000-30,000km. Note that the EGR can become clogged and not produce a code or MIL. Mine was clogged for years and there was no code or check engine light.

Get Toughbuilt bro.

I have the exact one. U’ve inspired me to do this myself. Thank you

I have a 1995 Rodeo. Different engine, but your video helps a lot. Thanks

I am curious if these mirrors would work as a replacement for a 2004-6 GTO as well? They look nearly identical at the mounts and the trim profile looks very very similar although the glass is definitely a different form/mold. So I went ahead and bought a NOS from rockauto that was a 1 day deal and cheap(21 bucks) and a mirror alone for a GOAT is getting harder and harder to find except for junkyards(where are you on this Dorman?!?!), and then its color matching etc issues to be addressed, I started closely inspecting as many GM cars same era as the GTO(even though it is an orignal Holden VSP manufactured car out of Australia, there are a lot of things that are homogenized for these cars.) Anywho, long story short, anybody have any knowledge of what I am about to try out? Thanks in advance👍👍 (oh and yes I did check cross reference and GTO only crosses to GTO's, I am leary of that though for 2 reasons...first off, the GTO was originally only produced for Australian markets and even though its a GM/ Holden produced model, maybe they shared blueprints for certain parts but they never made it into the parts catalog... 2nd, I can clearly imagine an exec from Holden and GM butting heads over production of OEM parts and Holden fighting to retain patents and copyrights in Australia and resisting any attempts at sharing part specs with any manufacturer including GM and probably Dorman too hence the reason even the mirror glass is hard to find)

Are these cars for sale or what please reply

Why did you shut the car off tho

What about a 2007 Buick Lucerne passenger side door panel? I have to replace my passenger side mirror...Thank you for the video!!!

😻😍🤩💖👍‼️

Great video, helped a lot!

Nice set of tools… appreciate the video 👍

not a hvac tech but got a few veto bags recently. I think you'd like the tp-lc

I have both and defiantly prefer the Veto. The Milwaukee jobsite dumps my tools way too often