![Kiki Hobby Repair](/img/default-banner.jpg)
- 71
- 535 513
Kiki Hobby Repair
Hungary
Приєднався 13 лют 2021
Welcome to my channel
My name is Kiki and I am a big fan of repairing faulty stuffs. The last few years I spent quite a lot of time watching repair videos. Especially consoles like Nintendo Switch's, PlayStations, Xbox's and also tablets, laptops etc. Due to the reason that I am anyway a technical guy I thought I would try out myself doing some repairs. So I bought some faulty consoles and because the succes rate was quite high I started to enjoy this process. Later on I thought maybe I could make some videos and sharing this content with you to learn (and fail because for sure on this level this sometimes happens :) ) together.
I am not a professional by any means, I am not a technician, my English is not perfect, my hands are shaking :) but I really enjoy this process.
In case of questions you can contact me on the following e-mail address: kikihobbyrepair@gmail.com
Thank you and have fun.
Kiki
My name is Kiki and I am a big fan of repairing faulty stuffs. The last few years I spent quite a lot of time watching repair videos. Especially consoles like Nintendo Switch's, PlayStations, Xbox's and also tablets, laptops etc. Due to the reason that I am anyway a technical guy I thought I would try out myself doing some repairs. So I bought some faulty consoles and because the succes rate was quite high I started to enjoy this process. Later on I thought maybe I could make some videos and sharing this content with you to learn (and fail because for sure on this level this sometimes happens :) ) together.
I am not a professional by any means, I am not a technician, my English is not perfect, my hands are shaking :) but I really enjoy this process.
In case of questions you can contact me on the following e-mail address: kikihobbyrepair@gmail.com
Thank you and have fun.
Kiki
I paid over $400 for 3 faulty Nvidia RTX3060Ti GPUs . Can I FIX them??? PART 2
Hello Guys,
In this video series I bought 3 GPUs for over $400 and I am trying to fix them to have some fun.
In this Part 2 video I am working on an Nvidia RTX3060Ti Founder Edition
Lets see if I can fix it?
Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the following link: www.buymeacoffee.com/kikihobbyrepair
Thank you.
Kiki
In this video series I bought 3 GPUs for over $400 and I am trying to fix them to have some fun.
In this Part 2 video I am working on an Nvidia RTX3060Ti Founder Edition
Lets see if I can fix it?
Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the following link: www.buymeacoffee.com/kikihobbyrepair
Thank you.
Kiki
Переглядів: 337
Відео
Trying to fix 3 broken RTX 3060Ti graphics cards
Переглядів 5586 місяців тому
Hello Guys, In this video series I bought 3 GPUs for over $400 and I am trying to fix them to have some fun. Lets see how many I can fix? Link to @northwestrepair UA-cam channel: ua-cam.com/channels/vDDbj3qJYg-5FSPFWJxqMw.html Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the following link: www.buymeacoffee.com/kikihobbyrepair Thank you. Kiki
Gigabyte GTX1660 GPU artifacts fix!!!
Переглядів 7937 місяців тому
Hello, in this video I am trying my luck with my first ever GPU repair. It is a Gigabyte GTX1660 that I purchased as faulty with artifacting symptoms. Lets see if I can fix it.... Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the following link: www.buymeacoffee.com/kikihobbyrepair
FIXING A MILWAUKEE ANGLE GRINDER WITH NO POWER
Переглядів 1,2 тис.7 місяців тому
Hello Guys, in this video I am trying to fix a faulty barely used Milwaukee M18 Fuel brushless angle grinder with no power. Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the following link: www.buymeacoffee.com/kikihobbyrepair Thank you. Kiki
BEST CHEAP laser engraver 2023 - MECPOW X3 PRO 10W
Переглядів 8798 місяців тому
Hello internet, in this video I am going to review the new Mecpow X3 PRO 10W diode laser which is a 279€ budget laser engraver/cutter. Is it any good? Lets figure it out! BLACK FRIDAY SALE!!! link: affiliate.geekbuying.com/gkbaffiliate.php?id=4226&url=999471 Affiliate link: Mecpow X3 PRO10W: affiliate.geekbuying.com/gkbaffiliate.php?id=4226&url=992910 Link to the Sculpfun S30 5W diode laser rev...
Best Cheap Bluetooth Speaker???? - Tronsmart Bang 60W
Переглядів 3329 місяців тому
Hello Guys, in this video I am going to review a Bluetooth speaker which was kindly provided by Geekbuying to me. Lets find out if it is good enough. Affiliate link to the device: Tronsmart Bang 60W Speaker: affiliate.geekbuying.com/deeplink.php?affid=4226&url=www.geekbuying.com/item/Tronsmart-Bang-60W-Outdoor-Party-Speaker-497262.html Coupon code: NNNBANG60W BLACK FRIDAY SALE!!! link: affiliat...
Sena 30K Mesh Intercom Battery Replacement / DIY
Переглядів 4 тис.10 місяців тому
Hello Guys, In this video I am going to show you how to replace the battery in a Sena 30K mesh intercom system. Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the following link: www.buymeacoffee.com/kikihobbyrepair In case of questions you can contact me on: kikihobbyrepair@gmail.com
Custom Wooden LED Light Box - Laser cutted
Переглядів 25311 місяців тому
Hello Guys in this video I am going to show you how I designed and made this wooden lighting box with the name of my little daughter Link to the products (affiliate links): Sculpfun S30 5W (tested version) www.geekbuying.com/go/7f2KRyOO Sculpfun S30 PRO 10W www.geekbuying.com/go/7f2KVnC6 Sculpfun S30 PRO MAX 20W www.geekbuying.com/go/7f2KWoFA Sculpfun S30 Ultra 11W www.geekbuying.com/go/7f2KalS...
DIY Dartboard Ring Light - 3D Printed
Переглядів 4,6 тис.Рік тому
Hello Guys, in this video I am sharing with you my newest creation which is my own design of a 3D printed Dartboard LED ring light. 3D printable files can be downloaded under the follwoing link: cults3d.com/en/3d-model/gadget/3d-printed-darts-table-led-ring-light Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the following link: www.buymeacoffee.com/kiki...
Fixing an XBOX 360 disc drive error - A funny one :)
Переглядів 197Рік тому
Hello Guys, in this video I have a funny fix for you where I attempted to repair an Xbox with a disc drive always opening and cannot be closed problem. I am sorry for the pixelated picture from the 27th seconds. It is only for roughly 20 seconds. I have no idea what happened..... Afterwards no issues. Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the fo...
Trying to fix a heating thermostat with a dead LCD - Missing pixels
Переглядів 434Рік тому
In this video I am attempting to fix a heating thermostat which has some issues with the LCD. Most of the pixles are missing. Lets see if we can fix it. Buy Me a Coffee. If you find my work useful and valuable you can support the channel on the following link: www.buymeacoffee.com/kikihobbyrepair
Sculpfun S30 5W diode laser engraver cutter test - Best budget laser?
Переглядів 4 тис.Рік тому
In this video I am going to review the Sculpfun S30 5W diode laser engraver / cutter which is an entry level cheap machine. The question is if it is good enough to recommend for beginners? Let's find out.... Link to the products (affiliate links): BLACK FRIDAY SALE!!! link: affiliate.geekbuying.com/gkbaffiliate.php?id=4226&url=999471 Sculpfun S30 5W (tested version) www.geekbuying.com/go/7f2KRy...
I made my own honeycomb LED Light and it turned out awesome
Переглядів 6 тис.Рік тому
I made my own honeycomb LED Light and it turned out awesome
Building Timelapse - Having fun soldering a prototype PCB
Переглядів 7432 роки тому
Building Timelapse - Having fun soldering a prototype PCB
DIY 3 axis Camera Slider - Open source
Переглядів 2,1 тис.2 роки тому
DIY 3 axis Camera Slider - Open source
3 Axis Camera Slider - DIY Portable Open Source
Переглядів 3,3 тис.2 роки тому
3 Axis Camera Slider - DIY Portable Open Source
Best Fusion 360 upgrade!!! - 3D Printed Macro Keyboard - OPEN SOURCE
Переглядів 4,5 тис.2 роки тому
Best Fusion 360 upgrade!!! - 3D Printed Macro Keyboard - OPEN SOURCE
Can my DIY Spacemouse compete with 3dConnexion??? - SpaceRat V2
Переглядів 103 тис.2 роки тому
Can my DIY Spacemouse compete with 3dConnexion??? - SpaceRat V2
Trust Rexx Vertical Mouse Weird Click/Button Issue Repair
Переглядів 2,3 тис.2 роки тому
Trust Rexx Vertical Mouse Weird Click/Button Issue Repair
DIY 3D CAD SpaceMouse for 20€ - 3Dconnexion alternative???
Переглядів 98 тис.2 роки тому
DIY 3D CAD SpaceMouse for 20€ - 3Dconnexion alternative???
Nintendo Switch overheating repair - ANYONE can do this!!!
Переглядів 29 тис.2 роки тому
Nintendo Switch overheating repair - ANYONE can do this!!!
FAKE Sony IMX290 microscope camera - SCAM
Переглядів 24 тис.2 роки тому
FAKE Sony IMX290 microscope camera - SCAM
Nintendo Switch Joycon connector replacement - The safe way
Переглядів 1,9 тис.2 роки тому
Nintendo Switch Joycon connector replacement - The safe way
Blue Yeti Microphone Repair - Being recognised as USB Advanced Audio Device
Переглядів 3,3 тис.2 роки тому
Blue Yeti Microphone Repair - Being recognised as USB Advanced Audio Device
Nintendo Switch Joy Con Repair - Analog Joystick drift - An easy one
Переглядів 2802 роки тому
Nintendo Switch Joy Con Repair - Analog Joystick drift - An easy one
Belkin charging station - no power repair
Переглядів 2 тис.2 роки тому
Belkin charging station - no power repair
поставь поляризаторы на источник освещения, на видео у китайцев он скорее всего используется....
Szia! Az akkumulátor amit beletettél az bír annyit mint a gyári?
So the term you are looking for is dynamic range. Each sensors has a certain amount of ~f stops or dynamic range meaning how much/little light is needed to produce a viable image.
Oh my god! That looks worse than my $30 usb microscope camera! By the way, I've been experimenting with arducam type image sensors to make a diy microscope camera. I have a setup coming tomorrow that is less than $50USD for 8mp/2k camera sensor and 8x-100x lens. For some reason arducam type pcb cameras went up greatly in price on amazon but you can still find deals from time to time. I will try to update with the results in a video.
Great video, I had an issue with the left click button where i needed to push really hard or it wouldnt drag properly etc. I noticed that the top button was slightly depressed than the right button so took it apart, applied some nail polish coats to add layers, top buttons are now perfectly balanced and it works great now! I also used the contact cleaner and compressed air (spotted some dust bunnies near the wheel inside) to just ensure nothing else would come up for another year at the least.
Annyi bóvlit árulnak és egyszerűen nem lehet megtalálni ami jó és nem csak a kamerára értem hanem minden elektronikai cuccra. Mindennel atbacarintanak a kínai szarokkal.
i instead got amazon to refund me
Maybe I was the one who bought and fixed it 🙂
which site did you order from Eakins store? or Eakins microscope store i believe they are not the same company?
hi bro whats called that seed's you used on chip in 9:18
Those are solder balls. They are made for bga smd soldering in different diameters.
What about inside quality of this particular mic ?? Is that just like a garbage or a quality product from inside this mic ??
These Blue Yeti mics are quite high quality. Lots of UA-camrs are using them.
@@kikihobbyrepair What about M-Audio mic and samson mic Which Brand given quality products?? Which brand make top quality products ??
@DG-fn2zb I have no experince with other brands.
What's the size of the battery in mhA?
Hello? I need to know if it will fit on my 3D printer before I pay for the 3D files. Can you please let me know what size printing bed I will need? Thanks.
Hello, the longest part is around 255mm long. I printed 4-5 of the sections the same time on my Bambulab P1S positioning them slightly diagonally.
maibe just use a lab powersupply these are about 50 euro same as the tweezers and can be regulated
I do not really get your point. Do you mean to use it for heating up the tweezer? But how do you control the tempearture? As soon sa you grab a componenet, the temperatiure will drop and you will need to provide more power to the heaters. A lab PSU will not do this for you.
Thanks for letting us know. That's very bad, bro. I am looking to buy Hayear HY-6110 with IMX334. It's the best when it comes to sensor specs, but I am now skeptical if they are using an original sensor or not.
you are so good and creative! Thanks a lot!
Thank you!
Well done with the design 👍. How big a print area does the 3D printer need to have?
Thank you! The sections are around 255mm long. I could fit like 4-5 on my Bambulab P1S diagonally.
@@kikihobbyrepair Thank you 👍
so i need a new battery? :(
This is why Aliexpress is one of the worst for dealing with dishonest sellers. I was sent completely different items that what was described, and even after many weeks of trying to navigate their ridiculous dispute process, I never got a refund. I ended up opening a case with Paypal. Always deal with eBay as you have a high chance of winning disputes there.
the fact i had my 3ds since my childhood and the battery and system works perfectly while my switch is from 2017 and makes noises like it’s about to explode and dies after an hour of playing…Nintendo rlly stopped making good stuff
Hi Kiki, coul'd you please show us where are connected tne four USB wires? (Close up picture, if possible). Thank you very much
Needs a polarizer to take that reflection away
Hi guys, anyone with problems on the left click button? Randomly stop receiving the clicking while pressing it... thks
what is the battery model
TYKK (thank you kiki)
Those green Joystick potentiometer can they be swapped with the orange ones?
Massives Problem dazu: Vidoes auf YT/Mediathek Fehlereinsichten auf ??? (Nicht nur dieser hier, sondern auch schon früher für "kleine" Fehler) Warum nicht öffentlich zugeben, dass man Fehler macht auf YT/Mediathek?
amazing level of engineering as for amateur, thanks for the video, was very informative
Thank you! 🙂
Thank you for sharing this 'trouble AND great frustration' you must have felt. I have learned from it. You looked very calm telling the story, but you must be so angry. Sorry for that. Wishing you well!
I would like to order a microscope camera but after watching the video and reading the comments I’m not sure which store or sensor to choose :/ any advice? Thank you!
Do you know where can I get a replacement for that led? My scroll wheel is not working but the led is soldered as it should. Maybe the led stopped working?.
amazing
Thank you.
@@kikihobbyrepair no upcoming video this months You haven't uploaded a video in 3 months.
I have a lot to do nowadays around the house. Furthermore I have a 1 year old baby 🙂 harder to find free time... But I have just this week started to work on a new interesting project. 🙂
Hi Kiki. I put together your project, but for some reason the zoom out button and the upper round button do not work. I am sure that I did exactly according to the scheme. Do you have any clue?
Mine randomly started going into overheat sleep mode and yeah I’m guessing it’s the fan. It doesn’t charge my joycons so I’m gonna have to attempt this, I’ve taken electronics apart before and built pcs so this shouldn’t be an issue. Thanks for your upload Edit also subbed, you earned it buddy
You are welcome. I hope it helps.
@@kikihobbyrepair just got around to finishing it today. the new fan spun up and i reconnected everything and added more paste and it works! thank you so much!
Gracias 🙏🏼
hi can u provide all needed items , to build this light?
Thank you for sharing your project. It is simply enormous because the circuit is kept so simple and only a few components are needed. I've been thinking about such a project for years, but I don't have the right knowledge of electronics and programming, but a lot of ideas in ergonomics and form design. As a program designer from the 80s to the end of the 90s in CAD/CIM, the mouse has always annoyed me. i hate the keyboard with Shift+Ctr+Alt plus right mouse click. 3dconnection is too expensive for me. I am a pensioner. So your DIY Space Mouse with 12 buttons with small LCD ergonomic all around, that would be ideal. Similar to the large 3DConnection models. I would hardly need the keyboard anymore. I work hobby-like with SolidWorks (ancient), Fusion 360, Davinci Resolve, Thanks again for your great work. HD
Thank you for the nice words!
Dang it dont hace a 3d printer and that would probability be expensive to do via online.
No hardware modification needed.... insane deal.
What operational amplifier did you use?. This circuit does not work with T082 because of the input common mode voltage range.
Just Wait It To Cool Down
I received the same model, but the USB points were damaged, do you have a schematic to be able to directly connect the cables to the board?
You lost 12 euro but win a loyal subscriber😂.
Thanks a lot 🙂
Just replaced the thumbsticks on mine, had nearly worn em down to the nub. Seeing from your teardown how easily they were swapped gave me the confidence to dive in, appreciate ya helpin me keep this dinosaur alive!
Do any thumbsticks work or do I have to buy a specific kind? Which ones did you replace it with?
I just used the standard thumb sticks from the Xbox controller that ships with the console (or sold separately). They have a similar connector that allows for full compatibility@@DarkForce852
@@DarkForce852 I replaced mine with standard xbox elite controller caps . Works perfectly fine .
do you think normal xbox buttons will fit this? my letters from my buttons wore off :(
Price?
Thanks!
Thank you!
Hi u think that work in solidworks?
save me from buying a new mouse
I am happy to hear this
Hallo, kann man die Maus irgenwo kaufen? Hello, can you buy the 3D mouse anywhere?
Hello, no, this 3D mouse is a DIY project. Only makes sense if you build it yourself. All the documentation is available for free.
@@kikihobbyrepair Habe leider kein 3D-Drucker
Thanks a lot! Congratulations!!!!