Відео

As far as the wire harness for the sequential tail light it comes with taillight. License plate light comes with the fender eliminator. And yes all the wires are tucked right under/ inside the fender eliminator.

What video?

I got the same issue. Pretty anoying. Dodge Grand Caravan 2014 for my part

I had somebody else had the same problem. He said he took it into a stereo shop and they connected two wires, two red wires together and instant sound I believe it’s a wire from the stereo that gives power to the amp. Check a red wire coming from the stereo harness to the cables that connect to the stock harness.

Thank you

Links are in the description of the video

There’s a cable that allows you to connect the rear monitors. I don’t have the rear monitors so I can’t confirm, but I linked it on the description of the video.

@@RonDIYMods thanks

Not at all. No problems at all.

You’re welcome bro.

The LED panel is a kit. It comes with the bulb with the wire amzn.to/3qQlcz0

@@RonDIYMods i'm a moron, i see it now on amazon. thanks

@@MrEhodg66 no worries bro.

Check out this video. ua-cam.com/video/1s8JfV35BMk/v-deo.htmlsi=Ro_IMJlRpT127GN3 Between the video and mine, you’ll be able to fix your door

I’m super glad that my video helped you. That’s the main purpose of my channel and videos. To help people do their one work and save money.

@RonDIYMods Have you done a video of brakes and rotors replacement for the ghibli?

Thank you. Yes. It’s exactly like OEM one.

@@RonDIYMods Cool, Its cheap enough. I may get one next time I do an oil change. I have been replacing the plastic cap every time I do an oil change. Filter costs almost $70.00 from dealership for the filter, cap, o-rings and crush washer.

@ wow yeah this is a cheaper alternative and you can keep using the same aluminum oil, cap housing.

@@RonDIYMods Sure, but I would inspect the check valve inside the cap at every oil change, make sure the spring is still good. Replace the cap if it is weak or broken. You don't need to take it apart, just push down on the valve and should be hard to compress. I still have the last few caps I replaced in the box the new ones came in with the oil change date listed on it so I can inspect them later for debris. Maybe I will buy one of the aluminum caps for my next oil change and compare the check valve spring strength inside that one to the valve springs in the old caps I have. Hopefully they are the same. I am always very suspicious of automotive products from China, I have a very hard time trusting them because I have not have very good luck with anything I have bought off Amazon from China. I could have saved a lot money on my lower control arms buying the Chinese made arms vs the OEM arms, but I just don't trust the reliability of Chinese products. Especially when it comes to my Maserati. They are cheap for a reason and you usually get what you pay for. A bad check valve can cause engine damage if used for an extended number of engine start ups. You could run it for a few months and then remove the filter to check it just to be sure. If it is ok, put it back. No need to drain the oil out of the engine. Just loosen the cap up so air can get in, it will drain most of the oil from the cap and filter. Remove the filter, check the valve. Reinstall if good. If you do this, you can make a video of it.

thank you for that information. Ok. Will do. I’ll check it in a few months and I’ll report back with it.

Wow. I’m glad it was a quick fix. Those wires might be the ones that give signal to the amp.

I think that is correct. Still confused why the plug and play didn’t work. Or I should say worked for a few minutes

Wow strange. Keep us updated

9”

Are you playing audio from the stereo or Bluetooth music. If you’re playing Bluetooth make sure your phone is not muted and your phone volume is up.

I have tried it all!!

pull the stereo out and make sure that all the plugs are plugged in correctly on the back

Reboot it

I did try all of this stuff. Like I said it was working fine for a few hours. Could it be a fuse or something else? Screen works perfect, just no audio via phone or radio.

Are you playing audio from the stereo or Bluetooth music. If you’re playing Bluetooth make sure your phone is not muted and your phone volume is up.

Every single thing works perfect. No audio. I’m have tried everything. Unplugged it all, back in. I feel like there is some type of mod that I need to make to supply audio

Did you ever figure this out?​@@keeganmyers3332

I didn’t remove the pillar cover. All I did is tucked around the side. No need to remove the pillar.

amzn.to/4i8S8bK

I appreciated your comment. When installing an aftermarket radio you need to use aftermarket mic. I haven’t figure out how to hard wife the stock mic to the aftermarket audio. If anybody knows how to do it, please post the procedure how to use OEM mic with an aftermarket radio.

Apparently it does but you need an extra cable to work with OEM rear view monitors. I personally don’t have the rear monitor so I can’t confirm this. Link in description of video.

Yes thank you

Nice. I love it bro. Makes the car feel quicker more responsive.

Thank you for sharing that info.

@@juanjaramillo8518 it’s a hard job but not hard enough to take day’s.

amzn.to/3ANzy8n antenna adapter

This wire look like they would work amzn.to/4fAzPud

@RonDIYMods thank you. how about the other wire with the frame you mention.

Just found a complete kit amzn.to/4hYJ0pV

amzn.to/3XuPfId

I believe this cable can work check it out amzn.to/4eBuem8

Yes all the info is here www.multiecuscan.net/VehicleSupportCheck.aspx

I believe this what you need amzn.to/3Z3z5rX

No. If you got the start/stop warning light that means you have an issue with the system or some other problem in the check engine system. Usually when you have a problem in the car the start/stop warning comes up. Try connecting the car to a scanner and see if you can pull any codes.

@@RonDIYMods Ran a code, got a P0440. Evaporation Emission System. So it make sense for the check engine light to be on. However, that's the only code. Could something to do with the emission failure trigger the Start/Stop light?

@ yes specially when your check engine is on it disables the start/stop and you get that warning light as well.

All you do is pull in the frame it won’t break.

Your welcome and thank you for watching.

3way valve/ thermostat parts.moparonlineparts.com/p-genuine-alfa-romeo-valve-coolant-3-way-68312761ad

Thank you for watching. 🤙🏼👍🏼

🤙🏼👍🏼

Do you remember the actual color name for the seat covers besides just Red?

2011-2020 Dodge Grand Caravan back up cam install on a T’EYES CC3 Radio ua-cam.com/video/_2TBYGLkIgQ/v-deo.html

OBD PORT

Thanks

I’m glad my video helped you out.

No

With the resonator delete it get louder not just in start but while driving as well.

@RonDIYMods did you also disconnect the exhaust valve caps?

@@Shapectro No. but I have disconnected them in the past and its a bit to loud for my liking.

Thank you for watching. I’ve had a good experience with quadlock so I would recommended.

@RonDIYMods how long is that usb Cable ?

I have a Dodge grand caravan, and as far as the steering wheel controls, I was able to retain when it comes to the two TVs and HDMI apparently there’s a cable that would help you retain all that including the reverse camera I can confirm this because I don’t have the TVs in the back, but as far as the reverse camera, it does work. The cable link is in the description of thevideo.

Honestly, I don’t think it’s a start stop. I’ve been using mine for almost a year with no issues. Usually when there’s an signal or electrical interference, you should be able to see it within the first month but if it’s been more than six months, I don’t think it’s a start stop. Where did you buy the star stop? Is it a name brand or something else.

I bought mine from AliExpress! Is it worth installing? And how did you disconnect the original, by just pulling on it, or do you need to press anything to unplug it?

@@speedf1688 theirs a little tab you need to press to disconnect. Press tab and pull.

????

Did you end up using the start stop disable around the same time or was this before you installed the start stop device?

I don’t think so. Where did you get it from. Did the problem start right after?

No not Amazon but I posted the links on the description of the video.

Are you talking about my video or did you do this install and don’t hear it?

@@RonDIYMods in the vid when you were revving it there wasnt a difference but i was in clas sso i couldnt finish the vid which i see in the driving it does come out

@@RonDIYMods i meant to add this into my last comment but you only listed the blow off adapter not the blow off valve you used can you link it to me cause im planning to get all 3 for my bday then remap my car

⁠@@ThatAlfaRomeoN i’m only using the cold air intake and the SILA adapter plate. The blow off valve is the original OEM one.

@@ThatAlfaRomeoN yes you can hear it more while driving if you’re revving it, it’s not that much of a difference but definitely while you’re driving you can hear it.

The links are in the description of the video