Відео

Hello they usually last about 75k miles and that is were I noticed it started driving like a wood wagon. When you go over speed bumps if its stiff then you know they are bad. I believe if you change the suspension setting from normal to sport you cant notice the difference is also an indicator. For me it was the oil stains on the driveway and I noticed that they were damaged. I had the new ones in the garage for the front for a while before my wife drove the car and mentioned it drove really bad so it was time to change them. The rear did go bad before the front but oil on them is an easy way to determine they are done. The car runs so much better now. Thanks

That is a great question. I would say one for safety reason of breaking when you are bringing the pole down. I am sure you can add a second one if you keep it vertical and if you bring it down cautiously not to break. The carbon pole has lifetime warranty. Let me know if you try it and works

hello oh boy I am not sure if they sell just the plastic piece. You can replace them but they are all different part numbers if I am not mistaken. I have not replaced one so not sure if you need to remove the valve body to get to them. I believe they pop out from the valve body. If you can insert the plug and put a zip tie maybe can work. Each solenoid is numbered and you would have to buy the correct one to match it. Hope this helps

hello I am not sure but they changed the cowl style I guess to correct the issue but not sure if it fits on the same holes. You would have to ask the dealer if it does. I had a friend with a newer year and looked completely different on the outside.

I should definitely do that. I need new tires on it.

Thats a great deal. Enjoy

Thank you glad it helped

I just did the oil on the motor. Didnt do the fuel filter I dont use the unit as much but great question its suppose to be under the gas tank. On anther video I did the pump oil change.

89k which I have been told that it happens way sooner.

@ExtremDIY Ya my g30 has only 35k on it and I had to replace the radiator and few hoses and the expansion tank. I am just afraid that the oil pump will go bad soon it's the early b58 engine with plastic oil pump.

@@sevakshir3612 I replaced the oil filter housing made of aluminum, the coolant fitting that cracked made of plastic, the water pump and thermostat all in one week. plastic parts are no good. my friend has a 7 series that is outside my house to be checked for cooling problems with 30k miles on it. Seems to be a pattern.

Hello not at all. the foam barely weighs anything. I did replace the single car door motor from ceiling mount to side mount to have a cleaner look and side springs to center style spring to match the double door. I also replaced the rollers that were making all kinds of noises. The foam helps a lot since I face east and in the mornings it would start to cook the garage. Thanks

Thank you for the info I will look into them with that warranty its a no brainer.

@ Great quality and OEM fit. I’ve already replaced upper/lower control arms, tie rods, and sway bar links…all with the 10 year warranty. They also offer free 2 day shipping and the prices are much less than OEM. I have a 2017 Escalade with 205,000 miles and it rides like new again

@@ponch38 That is awesome. I didnt know they had that great warranty. Since they sell on Amazon I will add the links to my video. Thanks again

hello before you do that make sure the cable that goes to the transmission is hooked up. I had my other Escalade where the pin fell out and tranny was not shifting. Its an easy fix just look at the side of the tranny and check the cable to make sure its connected. Also check with the dealer I believe there is a recall on the temp sensor before you buy it. Hope it helps

2015??

@ I thought only the zr1 was supercharged

Hello you can scan the QR code on the control box and download the app to change the colors. Make sure you have the power negative and positive correct. On my control box I am not using the first VCC slot. Starting from the second VCC goes to the red cables, second DAT goes to the green cables, CW goes to the white cables, WW goes to the yellow cables and GND goes to the black cables. Make sure you have all the colors together. On the app you can do a bunch of RGB configurations. We love it hope this helps.

No, regular oil additives themselves are not magnetic and will not stick to a magnet because most oil additives are composed of chemical compounds that do not have magnetic properties. Thanks

Hello, Conventional motor oil lasts about five years on the shelf, while semi-synthetic and synthetic motor oils will last seven to eight years. The oil's additives break down, potentially reducing its effectiveness. As far as the 6 months they recommend is most likely that you drive the vehicle on a regular basis. If you dont drive your vehicle its up to you if you want to change the oil at 6 months interval specially a car you drive once per month. When it comes to changing oil I recommend 3k to 5k max and use the best oil you can get and filter. I have found that Pennzoil Ultra Platinum if extremely good for the price. You can also look at Valvoline new Restore and Protect oil for vehicles purchased used and dont know the condition of the motor to help clean out any gunk. A good oil filter with 20 micron rating is recommended. By adding the magnets its cheap insurance and helps me to keep an eye on the engine. Hope this helps thank you

Hi my Name is Wilson J . from Canada. Thank you very much for Replying. I worked as manager.. of Can Tire & Woolco Automotive, I believed in good Customer service, would always bring Customers back & more Customers, what you just did for me is The best customer service i've seen in years!. Pease keep up The good work, Keep making These Vidoes (Best vidoes) and GOD bless you and your family

@@WilsonJohnson-y1ihello you are very welcome. thank you and same to you and your family.

Welcome

Thanks

I love magnets they can be used for so many things.

That is a good one..lol

I am sure its possible to get it done without removing those items. thanks

Thanks

Hello if you have the attachment series yes you can just buy the saw attachment and or the extension to it. I also have the attachment carbon series weed eater and I could have purchased the saw and extension but decided to get this setup cause it has the extra internal extension. This is the same as the aluminum but in carbon amzn.to/40dng36. Thanks

Hello I used this type of bender kit its inexpensive if you dont do it on a daily basis. amzn.to/4gKzjL7 there are more professional tools for it but I dont work with copper often this works for me. Thanks

hello the one I used I had for a while but honestly its a bit flimsy. This is a similar one amzn.to/49Vxo3m and looks a bit more sturdy. thanks

Hello its more difficult on concrete but if you are mounting on wood is a lot easier. The outcome is fantastic.

I totally agree with you on that. I did a Jeep Grand Cherokee I had that drove me crazy with the horrible cowl design too. Seems like cowls go bad rather fast. I also replaced the cowl on my son's BMW that fell apart also. My Escalade cowl seems to be holding up well and its a 2016.

Thank you for your feedback. This one is fairly new I dont think it needs the fluid change yet. Once its due I can make one but since we dont drive it much we are not anywhere near the 30k miles recommended cvt oil change.

@@ExtremDIY Thank you. Ours is fairly new as well, but people say... to help the life of the CVT, keep the fluid changed.

Its a fantastic light which I use all the time for my videos or if I go in the attic. Battery last ok and magnet is very strong. You can use as a backup but remember is battery so if you need to use for long time you its better to wire up the truck with multiple lights to get more of an even lighting than just one end of the cargo area. You can wire up to the truck with multiple linear lights and it will be very bright inside the truck and even add a motion option if you want to get fancy.

Welcome and thanks for watching.

Fram oil filters have a very good micron rating. I have been doing some research and they are pretty good. I wont use the cheap one but the TG or Ultra Guard are good. You can use the Mann filter that most people use. Most people have the brand they like to use like the oil type. I have used most oil brands and for me Pennzoil Ultra platinum is one of the best oils. I used the Euro spec for the mini but you can do Liqui Moly which is good oil to use also. The car has a 8k mile oil change but I will never go that high.

Thanks

thank you

Welcome

Hi no its some off brand we had picked up online and came with the brush to sweep floors but was too heavy. So we converted to brush cutter. We converted many Echo to do our mountain bike trail maintenance. To me Echo is the best all around gas equipment. You can buy the renegade blade and add to any trimmer you have. Check them out on the links above they are wild. thanks

@ExtremDIY oh all right I mostly use Husqvarna equipment such as backpack blowers and string trimmers and you know chainsaws

@05tunafish22 We had some Husqvarna also that we added the Renegade blades too. My partner had a bunch of Husq Chainsaws which he loved and even had some modified ones. Thanks

Hi its in a corner and crushing ice. My previous one was louder and was a glass one. When I use it one island its perfect. Maybe the professional ones could be a bit more quiet I assume. We use it all the time and to me seems perfect.

Depending on your vehicle there are some aftermarket aluminum ones with magnets. I believe for BMW there are some companies that make them. If you have a the plastic oil filter caps that stick out a couple of inches you can glue some magnets on the outside of the cap. Once you replace your cartridge you just clean the inside of the cover. You can also add the oil drain plug that has a magnet on it. I have seen people add a bunch of magnets to the bottom of the oil pan like the transmissions has. The only issue is you cant see the metal. Just every time you change the oil remove the magnets before you remove the oil drain plug so most of the metal gets flushed out. Hope this helps