Відео

Worked for my 2016 Wrangler...,a little flux ball sides of chip Heat gun,all done ....

Hi, how many brix do you have before go in the filter at the end the filter? Thanks you

I just got an 84 Bombardier SS25 470 that has been sitting in the woods for ten years. Wish me luck

Great video, thank you very much for your time and expertise

are you in heaven bro??

Hey I have the same timer on my slide gate at the car wash I have and I want to set it for the gates to open at 5 am but not close I have to close with the remote cause there might be someone still inside guess my question is do I have to set everyday of the week or do I only need to enter the time once on the first setting and that will open it everyday and what do I put in the off setting do I leave it blank

you do good work.

Every try this with 63mm pipe? Or any thoughts?

Smart move, wearing the respirator

Thanks Rudi. Very helpful video. Nicely done.

What an excellent video! On the way to my ATV dealer to get it for my 2024 Polaris 570 EPS

Was there a motorcycle inside? ua-cam.com/video/r6lAzan0MiU/v-deo.html

Your the man. Thanks. Im guessing by 102.7. U are from ny or long island. Im in seaford long island. Thanks. Gonna fix mine now

GE has connects 6 and that does use a single 5 AM. Miniature, fuse, they are so a miniature light string. They are polarized, other brands as well. And then you had the C7 and C9 that use the single 5 AM fuse, and then you also have the pro line sockets for C7 and C9 that are unfused and just rely on circuit breaker. I have taken at 10 AM. Confuse and put it into the C7 and C9 sets for nuisance. Fuse, blowing The fuse will still go away quicker than the circuit breaker will

BT 250 tüfek için atış tripod olur mu avda kullanmak için

How do you reuse the blue pad things? Is it Butane that is being put in it?

smart and well done , will do the same!

ALWAYS change your o-rings/gaskets. Never reuse. Even if its new and you just torqued it down.

Thank you so much!! Radio stations quit coming in on a long road trip and found this video and it worked perfectly.

Before bleeding the brakes gravity bleed first.

Nice and simple. You don’t use a pre filter over your air filter?

They sell rubber tires for 14$

Great Hack! Glad I kept a few of the empty cartridges. Was easy to do. And definitely a money saver on the rediculously high priced refills. Thanks

I agree with the others this is the most thorough video on this sprayer !!

Never use ethanol pump gas because the ethanol absorbs water from the air ...If you can use ASPEN FUEL OR VP FUEL 4 CYCLE NON ETHANOL....YES IT'S EXSPENSIVE BUT YOUR PUMP WILL START IN A EMERGENCY

On the brass adaptor hand tight is all thats needed ...other wise you'll crush your rubber washer

Thanks for the video🙌🙏🏾

The best little chain saw ever👍

Just tried it and the whole chip ended up moving on me, I put too much heat on it for too long I guess, trick is to only hold heat for couple seconds. Now I`m looking for another radio but I hear you need a code, nothing is ever easy.

Apparently, this is a very common issue with this unit. Mine's doing the same thing. I'm gonna try the soldering technique (I don't have a heat gun) and maybe upload a video too if it works.

What if we fill above the high mark.

This worked! Thanks a bunch. I don't think there are any new radios around for my 2013 Grand Caravan. :)

This must be a Canadian thing. Mine is from lowes and it's identical to the dealer

19 мм болт не могу открутить, он прикипел и одна направляющая прикипела, тоже буду менять

If it gen 1 then yes it dose every bit the 250 ft Pou is it says it dose the new gen2 it rated for 550ft but dose 600 ft pounds

Thank you. Helped a lot. Question, if when reinstalling the blower assembly back into the dash, if its not alligned properly will that cause a lack of air to come out of the vents? I can hear the motor roaring and working fine, just the amount of air coming is very underwelming. Its coming into summer her in Australia and need to fix this.

Thank you much rudi great camera angles and explanations

i have a slightly different problem...mine will say its on a station..but all i get is static..then every so often the radio will come in and play fine..only to go back to static...doesn't seem any rhyme or reason to it.

Yeah mine also cuts like butter you should get urs checked out Millwaklee is a good brand

Water pump is changed thanks for the help my man! Had quite the trouble scrapping and sanding and using goo gone to get the old gasket off, also had quite the trouble getting the new waterpump on without smearing the gasket and gasketmaker out of line. The biggest issue with that is that terribly stupid little hose under the AC compressor so hard to fit into that and not mess the gasket out of place. It's done and my truck isn't leaking coolant or overheating anymore. Saved lots of money but boy I almost gave up quite a few times. It's definitely an easy job but melted gunk and hoses will make it quite the challenge indeed, and getting the fan off required an air hammer from a friend.

Fantastic, worked like a champ for my Mom's dodge caravan 2016 now it will be much easier to sell with a working radio!

I put a set on my 2018 ram 1500 so I could carry 1 ton of coal.before the timbren I split the bushing on my shock from the weight.

Is this the same for the 2015 5.7 hemi RAM 1500? Thank you

All I had to hear was, "Canadian Tire" and I was all in.

You do not ever open up a sealed bearing and install it like that. You are making them more likely to get contamination in them. Even though they are "sealed" bearings, grease will seep into the bearings when pushed in through the zerk fittings as they are not truly 100% sealed.

Always a great leak os 1st coil, mine is the same thing hahahha

the aftermarket stuff is probably better than the polaris brand. owners think it’s the best product when in reality it’s no different and no better than the lowest cost lubes you can get anywhere else at half the price.

Took me absolutely forever to find this video, there's almost no information on the 1st gen dakotas it's all 2nd gen

I appreciate the video just to see which stub shaft I was getting but however after my install I had to leave a comment. You did that whole replacement thevhardest way anybody could have possibly done it LOL

Steering column cover is called a "knee bolster"