Відео

I have a computer with a power of 1200 watts and some RGB lighting devices. Do you think this device is suitable for me??? Usually the electricity fluctuates and goes a little higher and lower than the standard

You forgot to use unmanaged network software

sadly dont work limited to 1Gbps no matter what, got 10 Gbps switch and cables rated for 10 Gbps still says 1Gbps on network adapter with latest drivers and cant get it to work on any pc in the network.

So, I’m far from a tech expert, so take this with a heaping helping of salt. From what I could quickly find, this is likely an issue with the battery on the motherboard not retaining power. If that is the case, it may need to be replaced

1:13 i’ve done that a lot of times it brings me back to the same thing

why is it beeping?

should i also get the switch to improve my internet speed i bought the tp link itself and installed it into my pc and it didn’t make a difference at all

Is it noisy when running on battery power only?

I have the bazooka and mortar in different computers. Ddr4 is 3200mhz . Better 5600x or 3700x?

How did you remove the pcie brackets? Struggling with that

I pressed something in the bios settings and it showed this screen and nothing worked please any tips?

Starting Machine is almost like mine.

A bit of a newbie question but I see at 6:41 you removed some of the casing to accommodate space for a GPU. How do I remove those metal strips if I've already installed the motherboard? I bought a custom build second hand and don't want to take everything apart if I don't have to

is it pure sine wave ?

Hi! How much space is behind the panels when on the wall? Would I be able to put some LED stip lighting on the back of the panel?

Thanks for this, I was having trouble visualizing a similar setup, this helped a lot!

I don't have a keyboard. It's a tablet

Only have router modem and pc. Modem is 2.5 which is connected to 2.5 wan on router. My pc Ethernet port is 1gb. All other ports on router are 1gb lan. If I buy this adapter to attach to motherboard, how will I cable route this with my devices?

I have the V-2.6 of this and cannot for the life of me get the bluetooth to work the wifi is amazingly fast going from onboard X570 gigabyte

for 30$ more you can get the 5700x3d now. what a shame man get it!

To complicated. Got to much stuff going on for me, Extra router in a separate compartment, naw i didn't even go past that part, I was Looking for a simple setup. From my existing internet to adding the TP-LINK system. Thanks but this video isn't for me, gotta look some more. Thumbs up though.

I'm doing the same upgrade with a MSi B350M mortar, but when I switched the CPU from a 1700x to a 5700x, the PC stopped booting. Now, it continuously restarts without displaying anything on the screen. I noticed that the EZdebug CPU LED is lit. Any ideas on how to solve this problem? Before all this, I had updated the BIOS to the latest revision.

Quality of cushion is bad and 3.5mm jack cable is also bad as my vol button on the cable is malfunctioning. Headband cushion also came off. Using this headphone since 2020

Interesting but you never showed “how to” get error off so I can use computer today.

It's cool but that corner with two BBFs (drawers) is cringe and seems like it gets in the way with constant knee bumps.

Bro now I have problem with Diagnosing pc, screen black out

Or you can do what I did and get 2 more fans and have great air flow.

Yo screw you guys taking photos of my bass patches. You guys left some photos on my PC. Also some synths are able to have PIE on it thats not cool bro. Also whoever created the synth can suck my nuts Mr garrison even just adding background noise changes the light.

1400 EURO chair bad wtf ? you are a troll ?

I have the same problem, but replacing the battery didn't fix it, the bios clock is not keeping the time even after resetting it a few times with a new battery and then replacing the new battery with another new battery still no fix.

Built my pc in 2017. Ryzen 1600, GTX 1060 Added 16gb ram, then upgraded GPU to 5700XT and 750W PSU Decided today to finally upgrade CPU and went with the 5700x Didn’t want to spend the extra for x3D. I mean I’m coming from a 1600. They’re both light years ahead. And the 5800x seem to be ~2% better, but run hotter, so I went with 5700x Plus now I have a 5700XT GPU, and a 5700x CPU 😂

Pros +Compatible with all consoles +Clear, clean sound on all formats +USB audio mixer is easy to use Cons -3.5mm wire can be fickle -Better on PC than consoles Don't buy it if : You’re a console-exclusive player The JBL Quantum One certainly works fine with the consoles, but this is clearly a headset created with the PC in mind. The audio still sounds fantastic, sure, but there’s a few technical hiccups that can lead to some mid-gaming session frustration. You prefer a wireless headset As powerful and impressive as the JBL Quantum One is, it is a wired headset. If you prefer something that doesn’t tether you to your laptop or controller, then this headset is not the one for you. You don’t care about surround sound The One is the top of the new JBL Quantum line, so don’t feel like this is the only option. If surround sound or the other bells and whistles aren’t a concern and you’re just looking for a competent headset, other choices are available.

So what happens when it just boots you into bios?

What if my PC guzzles up more than 1000W? I mean, it doesn't do it all the time but during certain workloads it's very much capable of shooting above that.

Can

This worked, thank you! 😄

Hello! I need help with my montech air 100. The case fans won’t spin or light up and I checked the BIOS, do you know where the little 3 pin white one and the LED input one goes? Thank you.

I have an EVOO laptop model # EVC141-6BK. The normal login screen does not show up, a black screen shows up first saying "American Megatrends" then prompts me to enter a password. I am unable to login, it keeps saying invalid. Help would be appreciated, thank you.

My motherboard does not see my USB media, everything that should be enabled is enabled, on my main PC pendrive working fine. What am i doing wrong? ;/

I have an almost identical system I just picked up for $150. It's a 1700x, x370 pro carbon, GTX 1070, EVGA 650w G3. I just updated to the newest BIOS revision and bought some DDR4 4000 RAM. I'm very much looking forward to selling my old rig and upgrading to a 5700x and GTX 3080. It's amazing that AMD allowed for 5000 series on the x370 and that I can upgrade a 7 year old PC to almost modern specs. Mind blowing.

I did yes I needed a new processor

bro has never seen wall anchors before?

I’m going from a 2700x to a 5800x today. Great video! The stuff about the BIOS is what I needed. Thanks!

Hello, Congratulations Cool 👍👏👏👏👏👏

This is most unfortunate for me. Because of my living situation, I live in an RV with an inverter-generator that I have to power down every night before bed. So every night before I power down, I turn off my desktop computer and switch off the PSU then hit the power button to basically drain the motherboard. Before coming here, I had a strong feeling that it was my CMOS because of the symptoms, but failed to realize what I was doing every night to my desktop. My question is; Should I now just turn off my desktop as normal and leave it that way? Regardless, I am unable to keep power to my desktop at all times.

Nice video! I'm doing a build using the same motherboard the next upcoming week or so. I haven't built a pc for like 10 years.. lol I'm excited 😅

I dont have f1 on the screen

I got the same thing except mine doesn't say "PRO" and it will randomly die on me while it's IDLE (thankfully). So no power out from it, won't turn back on, nothing happens until I disconnect the battery and reconnect it, which is a bit of a pain since I generally need to unplug everything and move it to do that! I called Tech support and they were quick to blame my usage on it saying my computer is using too much power etc.... it happened 3-4x now when only a few watts of power being drawn form it. So that's nonsense. Not happy with APC support. Luckily I got it from Costco so I can just return it or replace it (but hopefully the model doesn't suffer from this issue and I just end up with it again). Previously using the same equipment I had the APC 1000 model and it never died on me until the battery died maybe after 6 or 7 years of use! So my question is, if you've bene using this for a while now do you have the same issue where it just dies for no reason?

Your shirt is obsolete now :D

Bro when that happen to my computer I got so scared I thought it broke but when I saw your video I got less scared thank you