Відео

Thank you very much! Yeah I think it’s fun to see the sticks while I’m doing some wild aerobatics. Do you change the reciever that comes in the UMX conscendo, or are you using ELRS with the stock reciever?

It might have a little upwards angle while punching out, but it for sure shouldn't be at a 60 degree angle. CG has a very large effect on the elevator, and if you're having issues with it climbing you should do some in-flight CG tests to see if you've got the CG correct. Also, remember that you must shut off SAFE to get your plane set up correctly. You can't trim or test CG with SAFE active.

No you’re totally right! We use the WolfWhoop WT03 because it has up to 200mW power, plus it’s super tiny. It looks like the TX02 and the WT03 are pretty much the same, so whichever one you like should work! We also have a video going over FPV cameras, and also how to add a camera to the conscendo, so feel free to check those out for some more info!

Thank you very much!

Yeah thanks! I think its fun to see how the conscendo is actually being controlled with the sticks, especially when its being flippy

Jeez over an hour??? That sounds awesome especially for a UMX! Did you add FPV to it, or just line of sight?

@@InvertedAviatorsRC line of sight

Well that’s really impressive being able to keep track of it and orient it correctly for so long!

@@InvertedAviatorsRC I had a spotter with me they helped

Woop wooooop thank you for the continued support as always!

Oh I'll have to give that a shot! Thanks for the tip!

Woah that's some awesome flight times!!! Yeah we really love this plane too. Did you test the flight without any FPV?

Do not use FPV

Oh that’s impressive! I get nervous flying line of sight when it’s really far away, but keeping the Conscendo airborne for 37 minutes LOS is awesome!!!

Yeah its awesome! I'm getting ~10 minute flights all the time and its super easy!

Oh that’s a great idea! We’ll have to look into carbon spars!

For this setup you should be looking for analog goggles. The WolfWhoop Wt03 camera sends out pretty nice analog signal, so digital goggles won't be able to be used with this camera. Our first analog goggles were the Teleporter V5 (www.fatshark.com/product-page/teleporter-v5) and they were really nice at the time, but nowadays you might want something like the Fatshark Scout. We also have a video on which goggles to pick out, so that might be a good resource too! (ua-cam.com/video/KAn8UINDpQg/v-deo.html)

We chose this camera due to its incredibly lightweight design, combined with its long range for its size, as well as the AIO camera and vtx system. While the Runcam Racer 3 might give you a little better camera quality, you would also have to add an additional video transmitter in order to send the camera signal to your goggles. With this plane being a super lightweight glider, we're trying to cut down on weight in every way possible, so in our opinion the WolfWhoop Wt03 is by far the best option! Let us know if you have any more questions!

Thank you very much! Yeah a super strong paint-adhering tape would be a life saver!

We actually bought this plane broken from a friend, so we haven't gotten to fly it yet, but yeah it should be fun!

Thank you sir!

I already have the dx6e and umx conscendo with a 3s spektrum battery

Ok the dx6e is the exact transmitter I use, so setup should follow the vid pretty closely! In terms of goggles, you should be looking for an analog set. Something like a Teleporter v5 or a Fatshark Scout should be pretty good for getting you into the hobby. While digital does provide really nice pictures, a digital system might be too heavy for a UMX build like this. Let me know if you have any more questions!

@@InvertedAviatorsRC thank you very much!

Yes of course! Let us know if you have any other questions, and our discord is always open too!

Yeah I need to do a little tweaking with the expos, right now I don't have any expo. And thanks for the tips for flaps with landing!

nevermind..i found your other video..just got the little fpv camera ordered!!

Glad you got it figured out! Let us know if you have any questions and happy flying!

Thanks! Yeah its been a new experience for sure! I always try to keep the speed up for those reasons, but flying mainly UMX planes creates some low throttle habits.

Well first off welcome to the hobby!!! We actually have a video that goes over all the different levels/types of goggles, as well as the parts that you need to get them working (ua-cam.com/video/KAn8UINDpQg/v-deo.html). But in short: 1. The Teleporter v5's are pretty cheap and a good beginner set of goggles (www.fatshark.com/product-page/teleporter-v5) 2. Some goggles need an exterrnal receiver module, but those teleporters don't, so big win. You might also need some Omni-directional antennas (amzn.to/3QlDSQU) in order to get some nice range from the goggles. Feel free to reach out here or on our discord for any more questions!!!

Thank you! Yeah the #1 thing you learn in this hobby is perseverance for sure. We're still working on some little issues, but things are looking good! And I really appreciate the compliment on the landing!

Yeah I'm stoked to actually get it up in the air! Hopefully you can get yours flying too!

Ah yeah I've gotten a few comments about the yaw string. My goal is to make sure the string is pointing straight back whenever I'm gliding

@@InvertedAviatorsRC for those who don’t already know Google adverse yaw for an explanation why it does not and rudder in the direction of the turn is required.

Yeah good call! We'll try to get something like that working!

Yeah it was awesome!!!

No need for an apology, your comment is super helpful! Few thoughts: - Yeah I'll have to look into that custom lua script to see if my signal is dropping out. - I'm actually using an external 4in1 module that attaches to the back of the zorro, and that antenna was sticking out and away from everything. Still super bizarre that it disconnected right above me though... - I didn't know that! I think the thrust reverse is really cool too, but from now I'll try to stick to rolling forwards! Thanks again for the kind words, and let me know if you see anything that I could tweak!

Maybe? I'm using the stock 6 channel spektrum receiver, with the stock antenna placement, so its super odd that it disconnected so close to me...

Yeah that wheel had a little flare action to it

Yeah thank you very much! I'm so stoked to finally get it in the air!

Woop wooooooop!!! How has flying been for you?

@@InvertedAviatorsRC long story but I basically given up flying. I'll probably be packing up my airplanes after I fix some of them

@@InvertedAviatorsRC if you want some pay for the shipping and I'll send you one 😉

I have a UMX twin otter I do not like flying. It has differential thrust no rudder

Oh no! Why is that??? That's so sad to hear :(

Oh I appreciate the correction! I have for sure been saying it wrong!

@@InvertedAviatorsRC I see, just a way of saying it. Great content, I'm FPVing my UMX consciendo from your inspiration.

Oh awesome!!! Feel free to join our discord to post some vids or to see some of the other projects we're working on!

Haha I just put a monitor on the to-get list, so anyone who want to watch can!

Thank you very much! It was a really fun video to make!

Hah you know that's a great question. I've looked into it and I can't find a conclusive answer. I do know that since the potentiometer is so sensitive, the lights would work even if the output went from -20 to 20. But great catch, and I really don't know why it isn't all the way up...

Hey! Yeah unfortunately these micro linear servos can be a little finniky if they come in contact with water droplets or a little rough crash. In our video where we fly the UMX Conscendo and UMX Evo, you can hear the Conscendo's aileron servo jittering quite a bit as I fly by. If you're only a few days into owning it, I would contact the seller of the plane and tell them the issue, because likely they will send replacement servos (I hope). Also, there is a way to set up AS3X only, and we have a video on how to do that for the UMX Conscendo!

Subscribed! Thanks, it's really disappointing since, yes, it's a week into owning it. It's nothing major, just the rudder servo.

Yeah really bummer since these planes are so fun to fly…

Oh no!!! What happened? I was flying my corsair the other day and randomly the esc started beeping and I couldn't control it...Did you lose control too?

@@InvertedAviatorsRC My fault completely. Started final to low hit a wind shear 15ft down into the corn. Tried finding but almost impossible without a drone, No worries lesson learned.

Would you benefit from having a beeper onboard that's controlled by a channel? I'm thinking about designing one that would help with lost planes

@@InvertedAviatorsRC I already purchased one an Amazon for 7 bucks its awesome and can you run in line with a channel or plugged into any empty channel and it is extremely loud!!

Gotcha thanks for the clarification! Its fun to have a yaw string on such a small plane :)

Thank you very much! Yeah we just try to post us having fun while enjoying the hobby, and its worked well for us so far!

Thank you very much! Yeah we enjoy the hobby quite a bit, so let us know if there are any other mods we should do!

Great tip! Yeah we haven't had too many blistering days yet, but once we do we can get soaring for sure!

Thank you so much! Let us know if you have any questions on the process! Are you doing it to a corsair, or to a different plane?

@@InvertedAviatorsRC doing a Corsair Annie' MO graphics, using a slightly different unit. I will be making videos soon, nothing fancy just like sharing the hobby. By the way You were the ones who made fpv possible for me by explaining it like humans! God bless brother!

Oh that's awesome! I'm stoked to help someone into the fpv side of this hobby! If you want to join our discord to share some pictures of the process we'd love to have you!

Thank you very much! I can't wait to get a few more flights with them installed because they are so cool!

Complicated? I found just the opposite… brilliant idea to realize that at almost no additional cost! I was sure he used a μC. Well done guys, the effect is amazing! No solution for Spektrum TX though, unfortunately.

Unfortunately yeah I couldn't find a spektrum solution, mostly because the edgetx solution requires some coding, which is lots more difficult in spektrum.

Yeah the lights may be small, but they pack a lot of punch! I'll say that even seeing them on the video doesn't do them justice in person!

@@InvertedAviatorsRC they really do !

Haha thank you very much! And you've totally read my mind, and I've been trying to figure out the audio side of it too!

@@InvertedAviatorsRC I'm sure you'll figure out a great solution but if you are interested, here are the settings I use when generating audio files for my Radiomaster Radios. I use Audacity and these are my settings. Mono 32000Hz 32-bit float Adjust gain so no red shows Select desired section of audio track File -> Export -> Export Selected Audio (or Export As Wav if entire track) Save as wav encoding Signed 16-bit PCM EdgeTX can use 6 characters max plus the file extension

Oh heck yeah thank you so much!!! I’ll look into it!

Haha thank you so much! It feels so cool to see them with fpv!

Not only a fuzzy television screen from the 1950's, but also the ability to get a camera feed from a micro aerobatic plane! If you continued watching the video, the static came from the quadcopter's antenna interference, and after I stopped following the signal greatly improved.

Hey! We use the WolfWhoop WT03 camera (amzn.to/4as2Lml) We also have a video that goes into the reasons why we really like using it! (ua-cam.com/video/IZ1zYvAbUY8/v-deo.html)

Haha thank you! I think that the majority of my time in the hobby is making mistakes, and then slowly making progress. And yeah I wanted to show off that often times you can be left scratching your head, and a little perseverance can take you a long way!