Відео

How come you took out the 1 inch front spacer was thinking of adding on to my 4inch lift to level it out

Whose headers are those?

Do you remove and install the engine with the transmission and transfer case attached as one unit?

Need the parts list for the E torque swap. The cost effectiveness is going to dictate how much to spend on an engine.

Hey brother I am NJ and I love your work I want to have my 2001 Jeep swapped to a 5.7 hemi or 6.4 with a 545RFE or 8HP70 I would not mind coming to wherever you are because I am very interesred in doing this and trying to maintain the car to look stock as possible, keeping emissions, srock guages etc.... I want to do a 8.8 rear end swap 4.56 and upgrade dana 44 front this is a swap I am so interested in doing it would be amazing

Any recent updates on the jl platform

who makes the engine mounts?

Any chance the 3.8 is gonna happen?

Nice... where can i buy this kit?

What if you can’t communicate to the tcm?

for a stick shift jk is an auto ecu needed if you have Hp tuners and can switch the config to Auto ?

For a 5.7 paired with a NAG1, is the torque converter included in the kit? If not what would you recommend and where would you recommend finding it

Could you just use a transmission from a 8-speed jl or jt? Instead of the ram truck.

Did you buy the bolts?

Why would you use the truck transmission vs the 8 speed and transfer case in a JL or JT? I have a 2021 Gladiator and a 2017 JK 2 door. I am wanting to find a wrecked or damaged JT and use the drive train in it. Since they use the same motor and such I was hoping it would bolt up and very little mods? has anyone done this? is the truck tranny stronger? My JK is a toy and I am wanting to have the same pep the JT has. World of difference. Is there a one stop shop source to this information. Thanks in advance. Larry

damn ... i have a 14 manual that i would loooooove to have a auto trans in ... the 8speed would be that much better ... guess i need to start saving my pennies ..

How do you mount the jl cooler on the jk?

Can i swap in at 2021

Would the broken sensor tip cause: “TCM undetermined clutch fault?” & “Clutch 2 fault?” I swapped in a new 845RE into my Durango, and that sensor tip was broken off from the old TCM (but swapped in to the new donor trans). As soon as I start driving, it jumps into 6th gear limp home mode when it does the 2-3 shift. Thanks, not much of this info out there other than your video. Alex

I got a question for you if you get a chance to answer it I want to know where the input speed sensor for the transmission is. I’m looking under the JK right now 2018 and I’m looking to see if I can fix this on my own plug-in play.

Will this swap work on 2dr jks? (2013 jk auto 2dr)

Is this a 2008 JK with the 3.8 or Hemi?

Couple questions. Will the 2010 grand cherokee 5.7 accessory drive bolt up to the 6.4 and if i send you a 6.4 intake can you modofy it like this one for me?

Hi, is your controller compatible SPAL PLUS SERIES - Choose "Device Select" 1 from the data sheet since your device is built for Jeep speed shop. can I change the 30% A/C Trigger, for example 40% because of high temperature I need a good performance AC.Could you please help me with this?

Hell yes

Waiting on 2023 5.7 to come in. Is it worth selling all that crap? Do you have digital list of all the parts I need to order?

Looking for ground wire on 2014 Dodge ram 1500 with hemi

too bad the engine running ruined your video

Only other question. Is there any reason to not go with the 8HP70 or 8HP75? Seems like they can be found a little easier and slightly less money. Thanks.

How about an e-torque on a jk? Just wander if it would be advantageous.

3 questions I have for ya Is the 8spd from a 392 different in the gear setup? What does a swap like this cost? You referenced smog sooo is your shop in Cali?

TODD is the best!! You need to start making videos about the rigs you build like those offroad channels. Woud you guys ever make a 5.7L Hemi & 8 speed install series?

Do you have to do anything with the driveshaft?

Hi, what is the Dip switch position

How to set the 30% for the AC?

Todd can I go first with the 8speed swap after that going for the v8 on with your kits?

Could you use your knowledge and hook up a BMW M57 engine?

I was bolted onto those points and in mid air one of the rear ones busted out. Chipped the whole rear corner of the head off where the ground strap goes. Luckily it didn't start any cracks or damage anything towards the block so I ran with that head and it's been doing fine for a few years. It was a brand new engine i had just built! I don't recall exactly what I said when it happened, but I'm sure Jesus wasn't thrilled. Lol

How to set the 30% for the AC?

Does this fit in a 2-door 2013 JK? Making sure that the longer transmission, with the 2-door, is not a problem. Know of any shops that can do this work anywhere? Also, do I still go with the same gearing I am planning on in my axels? Planning on 4.56 and running 35x12.5 all around. I've driven a Grand Cherokee with this setup from the factory and the 3.6 is completely different. Peppy, keeps good highway speed, plenty of power around town, etc.

Hi, what is the Dip switch position

I would like to do this conversion on a 2012 Ram 1500 5.7L, currently has the 65RFE. I have seen some guides online that make it sound like a aftermarket TCU is required. Would the process for the Ram be similar to your jeep?

No body lift?

Hy i did the swap already for my WK2 grand cherokee to a 6.4L hemi i am also looking for oil cooler as oil temp is heating mine 5.7 comes with a adapter and one more question were does both hoes goes to in and out for the oil cooler. Much appreciate

Can this be done with a 3.8 2011 2 door jk?

Is this carb legal?

Overall, daily driving and driving to and from trails overlanding etc, which hemi is best to swap into our jk/jl, the 6.4L or the 5.7L? Which is more reliable, less issues overall?

Would a 6.4 out of a truck work with your kit? Id imagine youd still have to swap some of the accessory drive. But probably not the intake correct?

What’s the difference between the 850 and the 870 which is better?

Will this work with a 06 dodge charger