Відео

It says it's too slow I'm sticking wrote down 3.0 and they sent me this 🤬

Thank you so much🙏

Trying these settings out right now with orca slicer, I've been having some issue printing PETG on my Neptune 4 Plus and have finally gotten it to stick to the build plate so I hope these seiings are the sprinkles on the cake I need to get my prints looking good :D

A normal print is 0.2 layer height. Sounds wrong having 0.06 between nozzle and bed then? 😂

what is the best color to use or does only white work?

I’ve been struggling with PETG and gave up. I’ve tried again with your settings and had a successful print. Cheers

You are not taking your own advice. you are checking with no heat or the paper would turn black. It is thermal paper after all.

You would not dare!

Something i do a lot is do a bed level test on my printer and adjust it while its printing, saves me a ton of time and works perfectly

How do I actually get the footage onto my iPad? I want to use it to make UA-cam videos but I do not have a pc

3d rocks has changed its platform now u can't fo anything:(

I really like the dell one. I purchased a newer model 4k. In my opinion, it is at the top for that price range, and even can recommend it towards the 400-500 price category. From that Dell, going to a 400-500 dollar category there really is not huge improvements from what i have seen. Not monitor is just 100% in my opinion either. You might get more fps with a 400-500 priced or higher monitor, but to non gamers that is not a huge area of concern.

To clarify is the screen led or lcd? Bestbuy lists it at led

Nice video. 4K, IPS panel, LED screen (I think), HDR, wow great price.

How is the quality of the recording?

is it normal after importing my .stl file it delimitates some red areas/lines on my pic lithopane and gives the following error "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura" ?

Dude I’ve been struggling badly at this. This was beautiful ty

Can you do this on the series S aswell or just the X?

i orderd the springs and wheels fore the ender -3 v3 se but i dont understand the z ofset thing how o start that on my printer ?

Thanks for the great and informative video. I'm currently having issues recording anything above 30 minutes in 4K HDR. I will try SDR tonight to see if this makes a difference. Currently trying College Football 25, where other games have recorded with no issues. When I stop recording I do not get the notification on screen and the video is on the SD card but corrupted. Sometimes takes forever for some recordings to even show up for OneDrive uploading. Thanks again!

How about laying a sheet of heavy aluminum foil, on a heated glass bed? Will the print adhere to the foil or stick to it?

Exactly what I needed 😁 thanks

I have been very pleased with California Filament PETG colors $23 +/- per 1kg. Also have several matte colors.

Thanks a lot, your profile works very well

I've been dealing with bed leveling for the past few days and using a receipt over printer paper really felt like it improved things and was easier to level. Thank you!

I did everything here and it still won’t let me record for an hour. It’s not an issue with this video, it’s an issue with Xbox. Every day I get closer to buying a PlayStation and tossing that thing in a dumpster. Exclusives are supposedly gonna go to PlayStation anyway

I was using way thicker paper, I can't wait to try this!

I printed for a year and a half then stopped for a year and now I cant get any filament to stick to the bed at all I play with z-offset for hours (every offset number in a range of 30) over and over, I slowed the print down to 30% and nothing. My extruder is pushing but maybe not enough. IDK what to do. Ive also been using reciept paper for a long time

Does it have to be a sad it’s not working for me I did all of this. Before I looked up vids on how to do it 😅

Excellent video thank you. Do you have a video of pulling this recording from a website so you can edit and upload to YT?

Followed these instructions and was able to print my best print ever!! Great vid!!

I get the 4 corners leveled, but the center has way to big a gap. so big the filament just globs on the nozzle

I know I’m super late and you probably won’t respond but I’d really like to look into long time recordings, like not recording recent gameplay but from starting a recording to ending a recording, how far can I max that time. I know yours said one hour but is there any way to make it longer?

CC3D has an amazing Petg, their black is awesome

People say PETG is less of a pain in the butt to print but honestly it's even more of a horror than ABS.

Thank you so much most people who explain what to do don’t give clear and thorough instructions thank you for your dedication and effort. I want you to know you are amazing and keep up the good work you are making a good difference in the world/3d printing community.

Lol it gets so confusing. Watched another video yesterday that claimed it didn't matter what thickness of paper you use, as long as you get the four points the same. Then adjust the Z axis to the right gap. So I'm struggling to understand why using the receipt paper would make any difference

Straight to the point and answered all my questions. Thank you 🙏

Where is the gauge video link?

bad video when I switched it to media i took all my games off my storage

man how you record the main menu screen??

Liked. Subbed.

Thanks! That was super helpful!

Please use less of it. Whatever it is, less please

This fixed the extruder click issue. I was using printer paper and for whatever reason the printer kept trying to level it which caused the extruder to begin clicking

Hi, thank you for this video. I don't see any stringing when I look at the "Landspeeder Kit" at 1:04 on your printer. That's great. Did you share a Cura Profile for it? Thank You

I have used both types of paper but what is the game changer for me is printing a CHEP Bed Leveling Test Print afterwards and fine adjusting according to the thickness of this first layer print. Knowing what a first layer should look like is standard to be reached and I fine tune the knobs according to the outside lines thickness until it looks perfect. If the thickness is equal at each corner then you are good to go. Before I start a large print I always print a CHEP Bed Test Print to ensure I'm just perfect to proceed. Another item that I would like to mention is I highly recommend buying or building a filament dehumidifier and enjoy problem free prints - the difference is night and day.

Thank you. you don’t know how many hours and how many retraction towers and temperature towers I printed and made no progress until now

today was a shit show trying to get my printer to work again . with no success . i thought about using reciept paper but got distracted . thanks for the tips. will comment again if i can get mine working next time i try