Відео

That was it! I was about ready to spend $700 on a new one. Now my wife thinks I'm a genius. Thanks for posting!

Thank you after being frustrated with a dirty pool and no answers from my pool store finally I fixed it with your help

This finally fixed mine! I knew it had to be something simple. I tried cleaning them out from the top by pushing a nail thru it, which helped a little but taking it a part & cleaning it out made all the difference. Thanks again internet stranger!

Bless you, Matthew!! I was feeling your pain!

I don't have a plastic cover but a metal plate to unscrew

This was informative but painfully to watch....

Throw it away already..get a decent sweep…suction side. Hayward The Pool Cleaner

Will I need to do some type of a reset after installing new MAFs my 997 turbo or will it give me instant feedback from feel on engine revs. Thank you

Ty

Yep, this was my issue and your recommended fix worked. Thanks for posting this.

great video, i can't stop watching it

Thanks a lot for the video. Saved me from buying replacement parts. You were extremely helpful!!!

Ugh. Stupid thing. Thank you. I’ll try that today.

Thank you, Thank you, thank you, this was the issue as it was a brand new sweeper and we had just had the pool resurfaced sot there was a lot of small debris in the bottom.

the outer ring looks dim

Thanks for the video, just saved me a trip to the pool store.

On some E70's you need to take the wheel arch off, halogen cf xenon bulbs

Thanks, Matthew! You just saved us a potentionally expensive service call from the pool guy!

Great!, my x5 has both black wires… 🙃

Bro, I had changed tires, adjusted a ton of stuff. This worked💪. Had blades of grass stuck in the thingi. Thank you!

I appreciate this video! I cleaned using a finishing nail and there were no obstructions. Fairly sure the pressure from the pool pump is too low because I believe there just isn’t enough downward pressure on the Polaris.

How do you take it apart?

Thank you so much, I was going to lose my mind

Thank you so much for taking the time to make this video, this was exactly our problem! We had so many things wrong with our cleaner, replaced all the wheels and tires,drive shaft assembly, backup walve, adjusted the pressure. It was frustrating that after all of that, it didn’t work UNTIL we found your video!! Thanks!

Thank you so much for taking the time to make this video, this was exactly our problem! We had so many things wrong with our cleaner, replaced all the wheels and tires, drive shaft assembly, backup walve, adjusted the pressure. It was frustrating that after all of that, it didn’t work UNTIL we found your video!! Thanks!!

As others have stated....EXACTLY my issue. Quick unclog and back in business. Many thanks from Massachusetts.

Thank you for posting this video. It solved the problem with my Polaris not going to the bottom of the pool!

Nice!!! Will try this when I leave work.. .... THANKS From DallasTex

Those LEDs do generate a ton of heat, especially an H8 replacement. I'd recommend you drill a hole in the back of that cover, and just big enough to get the part that screws in connecting the two halves of the wiring together, with a grommet to seal it and some silicone to give it an extra good seal. Then wire that heat sink up against a solid metal portion of your front clip there. That'll keep the heat away from all of your optics...which do tend to go amber, darken, and eventually sever as heat is run through them - as well as keeping all the other bulbs nice and cool, and not smothered with extra heat and insulation (from the heat sink and the insulated wiring). Essentially a typical halogen-based drl optic (the angel eyes themselves) will eventually turn dark/dirty and barely seem lit...that's from the heat it puts off burning the optics over time. Imagine swapping to an LED and essentially removing all that heat from the equation entirely. Except that heat sink is going to generate far more heat than the halogen bulb did. Looks really good though, I like how bright they are - thanks for sharing. * I'm editing my comment after some research as I discovered a clear difference between pre-lci and lci and as well to what I sourced as the right bulbs and what actually are the right bulbs; I'm not mind blown anymore - sorry for my presumption.

You sir are a gentleman and a scholar. I appreciate this video more than you'll ever know. I could not find anything from Polaris about that particular part anywhere so thank you

That is the high beam bulb on a Euro 2009 X5 E70.

Omron are the best bulbs,bmw are so overpriced for there parts

Why is one halo always brighter where the bulb is. I've seen some uniform on both halos right left and centers .

WHY is that engine compartment so filthy????

Hi, could you help to test a backup valve for 280?

THANK YOUUUUU!!! Man this really worked!!

Water doesn't come out of the float. Bobo.

I notice the bulbs are 180w. Wonder what oem current draw is, 30w maybe? Is that going to be really hot and possibly burn your wire?

why cables are so f.... short. I will do extend mine for sure

Thanks for the video. Ordered a set. Hopefully I'll have no issues with heat. As occasionally the Amazon links change I am posting the part number. GFJMC 63217760782 Cree LED Angel Eyes Halo Light Bulb H8 180W CREE LED Marker Halo Light 6000K There is also a higher quality 7000K from Lux at $200. luxangeleyes.com/products/lux-h8-189

MAF looks quite reachable from the top, no?

I'll recommend you go with original bmw parts. Replaced the daytime running light with a chinese LED version of it. Caused both xenon headlight to blow. Be careful rather go with BMW parts

On mine, that's the high beam bulb.

Don't you get the bulb failure warning ?

Craming all those wires is a concern for me. The led resistors get really hot and can pose an issue inside an airtight light assembley enclosure. Have you checked inside the light fixture since is your install? All good and still no codes?

Great DIY vid. Thanks!

On e70 2010 model is completely defined

Thanks your video helped me to replace the light bulb and saved my self from $219 the dealer wanted me to charge for the job and I didn’t my self for $14.99 tanks again

Can you help me figure out why mine has a chip module instead of a lightbulb even tho its literally the same chassis?? Please im breaking my head over this.. 2011 bmw x5 xdrive35d e70

Thank you for the video! very much helpful